AutoCAD LT :: 2013 - Crash When Switching Between Tabs
Sep 14, 2012
I've been crashing (fatal error, unhandled access violation) a LOT lately, and it happens when I'm changing between tabs - both between layout tabs and from layout to model. I have a brand new computer and a recent install of AutoCAD, which I also ran the repair routine on recently to try to fix the crashing issue. This happened with my old computer as well, and our IT people thought maybe it was too old to handle AC 2013 (old one was about 7 years old), so now I'm running an HP Compaq Elite 8300, Win 7 OS, with an Intel i5-3470 CPU at 3.2 GHz, 8 GB of RAM, and an NVIDIA NVS 300 graphics card. And it still crashes.
I'm using files that were created on my old CAD station, which ran AutoCAD 2008 LT, and it started crashing on me - I suppose it's possible that one or more of those files got corrupted and that's what's causing this.It's crashed three times in the last three days, and probably a total of 10 - 15 times since my new computer came in late last month, and I'm getting pretty tired of it.
View 9 Replies
ADVERTISEMENT
May 17, 2013
I have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
View 9 Replies
View Related
Jul 18, 2013
Switching between each layout tab takes about 23 seconds.
What I know about the drawing:
-using AUDIT reveals no errors in drawing.
-Main drawing = 840 KB
-5 Xrefs total
-each Xref less than 1 MB each
-15 Layout tabs total in main drawing
-LAYOUTREGENCTL set to 0, 1 or 2 has no change on situation
View 6 Replies
View Related
Sep 19, 2013
issues switching layout tabs by clicking on the tabs?
Occasionally, clicking the Model or other layout tab results in no action, as if I'm not clicking on it.
All other controls (within and external to C3D) function normally so it's not a mouse hardware issue.
It will usually correct itself if I "restore down" the main application window, then maximize it again.
The -layout command is a workaround too.
View 9 Replies
View Related
Sep 1, 2011
Is it at all possible to switch between layout tabs by a command? I'm messing around with a .bat file that creates a script for printing that only prints layout1.
The CAD file I'm trying to print has multiple tabs and all tabs have a different name, Lot 02, Lot 03, Lot 04 (not the standard layout1, layout2, etc).
View 8 Replies
View Related
Aug 20, 2010
I have just started working with Architecture 2011, so perhaps there is some strange issue at work here, but I haven't come across it previous releases. Whenever I switch from model tab (in 2D wireframe) to a layout tab and then back to model space, the visual style automatically switches itself to "Wireframe" or "3D Parallel Project", instead staying 2D Wireframe. It is highly annoying as I have to hit the 2D Wireframe button on the Visual Style Menu everytime a switch. This also occurs everytime a hit the Save button. It won't stay put in the visual style that it should.
View 6 Replies
View Related
Oct 6, 2012
I recently updated Lighroom 4.1 to 4.2 successfuly, but now any time I go into the Develop module, Lightroom pauses, then crashes and forces me to quite the program. Is this a bug than needs to be ironed out, or is there something else going on?
View 1 Replies
View Related
Jul 24, 2012
i download it successfully BUT nothing happened as usual on my CAD screen - tabs doesn't appear !
- i restart my AutoCAD many times.
- nothing appear in plug-in tab.
View 9 Replies
View Related
Jul 20, 2012
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
View 5 Replies
View Related
Aug 29, 2012
Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
View 2 Replies
View Related
Oct 5, 2012
When I try to switch to a different layout in a drawing AutoCAD will switch to a different drawing. Then I have to go and get back to that drawing to do anything to the layout.
View 9 Replies
View Related
Oct 25, 2013
I'm having an issue in 2014 with switching between model and paper space. It takes 4-to-5 seconds for me to begin working in these spaces, after switching. Going between tabs is not an issue, it's just switching between model and paper space that causes the lag.
View 2 Replies
View Related
Apr 26, 2012
Just got the new 2013 version and I'm having this strange problem:
When I open a drawing (that was last saved in Paper Space) and I'm switching to Model Space, my view is not set to "Top" by default. How can I set my view by default to "Top"?
View of when I'm switching from Paper to Model Space:
"Top" View, what I'm supose to view by default...:
View 9 Replies
View Related
Apr 13, 2012
Right-click on a layout tab, select Rename ... nothing.
It looks like it highlights the tab for a nanosecond then crosshairs appear with an empty command line.
I eventually renamed one tab by selecting rename like fifty-eleven times.
View 9 Replies
View Related
Mar 30, 2013
I just down loaded the new autocad 2014 yesterday and I have no ribbon. If I go to tools - palettes - ribbon, an area where the ribbon should be opens up with the message "the ribbon does not have any tabs or panels currently loaded".
How do I load the tabs and panels?
View 2 Replies
View Related
Sep 18, 2013
If some poor soul decided they didn't want/need them taking up screen real estate, how would said individual permanently disable them?
Tools > Option > Display > Display Drawing Tabs (FILETABCLOSE) works fine for the session, but it's not being remembered between sessions. How to make it leave and never come back.
View 9 Replies
View Related
May 21, 2013
We have a drawing with 100 tabs,
How can we change the printer on all tabs at one time. Example: All tabs are now for printer 78 but we need them to print on printer 77.
This was working in 2010 but does not work in 2014.
routing attached.
View 1 Replies
View Related
Feb 28, 2013
Switching between paper/model modes in case of overlapping viewports,I got 4 viewports (screenshot is attached)
My issue here is that I couldn’t switch between the paper/model modes for the inside viewports! This can be done only for the “biggest” viewport (that bounds the other viewports)
Then how can I switch between the paper/model modes for viewport number 2, for example?Right clicking a particular viewport (attached) doesn’t give option to do so!
View 4 Replies
View Related
May 31, 2013
Restore my Model and Layout Tabs at the bottom of the Drawing area. I went to Options/Display Tab, and under the pannel of "Layouts elements" the box of "Display Layout and Model Tabs" is checked, yet, I can't witness this diplayed. Even if I have to toggle something to make it hidden and displayed, where is the place for that? See the pictures of my settings and the Drawing area.
View 3 Replies
View Related
Mar 20, 2013
How I can edit the attached 3D drawing without drawing it from scratch. I want to increase the outside 4 tabs from .030" to ,050". I want to move the 2 inside lips .040 up. Drawing attached.
View 5 Replies
View Related
Nov 25, 2013
LISP routine that can create multiple paper space layout tabs and can name them incrementally.
View 4 Replies
View Related
Jun 20, 2013
When opening some drawing in Autocad 2014 it automatically creates thousands of layout out tabs which need to be deleted. This causes a huge problem while batch plotting.
View 9 Replies
View Related
Dec 12, 2012
My group and I are getting an infrequent but annoying problem with Model Documentation (MD) generated views in paperspace layout tabs. We all on autocad 2013, with sp1.1 installed on x64 machines.
We are seeing objects/ blocks showing in the MD views (viewbase created) in the layout that are no longer in model space. One common factor in this is that these objects seem to always be externally referenced (xref) files that have been either unloaded or completely detached (both cases purges preformed afterwards to wipe any remaining blocks made no difference). In this latest case the ghost objects show up twice (we needed 2 of the same xref) at what appears to be the correct old coordinates.
We have no work around for this and when this occurs we either have to revert to an older version from vault or create a new dwg, port all information over and recreate all views. The interesting thing about this problem is that if we revert to an older version from vault, the ghosts do not reappear/ reoccur at the same commands they appeared at previously.
View 2 Replies
View Related
Jan 7, 2014
My girlfriend has a problem with AutoCad 2013 students version. After attaching pdf file in underlay option AutoCad crash. She's got macbook air with system version OS 10.9. She had not ever problems with pdr iunderlay before.
View 1 Replies
View Related
Aug 20, 2012
We have just loaded the following the this order, AutoCAD2013, Revit MEP then Navis Simulate. All 2013. Everything works, including the NWC export from Revit MEP and the export from AutoCAD.The problem is that when you submit the NWNAVIGATOR command, Autocad thinks about it and then crashes out of AutoCAD. We have switched off the Hardward drivers.
View 4 Replies
View Related
Jan 10, 2013
I am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
View 5 Replies
View Related
May 22, 2013
I need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies
View Related
Jul 6, 2012
AutoCAD MEP 2013. Having a repeated crash when creating a 2D section view. Works great up until I place the 2D section and then crashes. I have tried using sections from Electrical and Arch palletes but same thing. I've used this tool thousands of times on other versions but this is the first time with 2013.
View 2 Replies
View Related
Jul 31, 2012
I am using Windows 7 64 bit laptop. When I close a drawing just after saving in AutoCAD 2013 64 bit, the program crashes. This will happen with one drawing open, or several. I also had this problem with 2011.
I have been using AutoCAD for 16 years and never had this problem with previous versions on earlier operating systems.
View 9 Replies
View Related
Jun 6, 2012
After upgrading/switching my stand alone license from Civil 3D 2011 to Map 3D 2013, my computer is crashing before a complete opening of some larger dwgs (1575 KB). Sometimes I get an Out of Memory message.Other (much smaller) drawings open fine.The switch from Civil to Map was made because we were not using any of the civil bells and whistles that make it unique.
Map suits our needs. We use shp files (data connect) to generate most of our work.I can use another computer in our office that has Map 3D 2011 and am able to open up any of the drawings with no problems. Because I had no issues with Map 3D 2011, I thought moving up to 2013 would be "easy".
We have a subscription and every couple of years try to load up the latest and learn to live with it.Now I am wondering if we can all just go to Map 2011 and forget 2013.
View 6 Replies
View Related
May 17, 2013
The big problem is that when am doing whatever work, the program stop working and show a error message, that says: ERROR FATAL: Unhandled access violation writing 0x000 exception at 70601612h
[URL]
And it happens when i'm on any kind of views or after printing..
My Pc is an: Intel Core i3-2100 CPU @ 3.10GHz
4gb Ram
Windows 7 ultimate x64 bits
I DON'T HAVE AN VIDEO CARD. I use the one that provide the Motherboard.. Thats Intel HD Graphic 2000
View 1 Replies
View Related
