When opening some drawing in Autocad 2014 it automatically creates thousands of layout out tabs which need to be deleted. This causes a huge problem while batch plotting.
View 9 Replies
I have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
Right-click on a layout tab, select Rename ... nothing.
It looks like it highlights the tab for a nanosecond then crosshairs appear with an empty command line.
I eventually renamed one tab by selecting rename like fifty-eleven times.
Restore my Model and Layout Tabs at the bottom of the Drawing area. I went to Options/Display Tab, and under the pannel of "Layouts elements" the box of "Display Layout and Model Tabs" is checked, yet, I can't witness this diplayed. Even if I have to toggle something to make it hidden and displayed, where is the place for that? See the pictures of my settings and the Drawing area.
View 3 Replies View RelatedSwitching between each layout tab takes about 23 seconds.
What I know about the drawing:
-using AUDIT reveals no errors in drawing.
-Main drawing = 840 KB
-5 Xrefs total
-each Xref less than 1 MB each
-15 Layout tabs total in main drawing
-LAYOUTREGENCTL set to 0, 1 or 2 has no change on situation
LISP routine that can create multiple paper space layout tabs and can name them incrementally.
View 4 Replies View RelatedMy group and I are getting an infrequent but annoying problem with Model Documentation (MD) generated views in paperspace layout tabs. We all on autocad 2013, with sp1.1 installed on x64 machines.
We are seeing objects/ blocks showing in the MD views (viewbase created) in the layout that are no longer in model space. One common factor in this is that these objects seem to always be externally referenced (xref) files that have been either unloaded or completely detached (both cases purges preformed afterwards to wipe any remaining blocks made no difference). In this latest case the ghost objects show up twice (we needed 2 of the same xref) at what appears to be the correct old coordinates.
We have no work around for this and when this occurs we either have to revert to an older version from vault or create a new dwg, port all information over and recreate all views. The interesting thing about this problem is that if we revert to an older version from vault, the ghosts do not reappear/ reoccur at the same commands they appeared at previously.
issues switching layout tabs by clicking on the tabs?
Occasionally, clicking the Model or other layout tab results in no action, as if I'm not clicking on it.
All other controls (within and external to C3D) function normally so it's not a mouse hardware issue.
It will usually correct itself if I "restore down" the main application window, then maximize it again.
The -layout command is a workaround too.
AutoCAD command to turnoff the Model/Layout tab in autocad 2014 or which function i need to call from code.it will trunoff the modellayout.
View 7 Replies View RelatedWhen in Paperspace and using the Plot icon and choose Printer Name "PublishToWebJPG.pc3" I get a JPG created that is size 32 bytes, but is empty.
I need to create JPGs of drawings for a document. I have attached an example DWG and a resulting JPG.
BTW: I did try using SAVEIMG - as JPG, TIF, PNG - it does create an image with the title block, but not the model content.
For some reason, every time I use the "Refine Edge" option after making a selection, then hit "OK", Photoshop creates a new layer with a mask on it, instead of simple leaving the selection outline there and letting me decide what to do with it (which was the previous behavior).
How do I make "Refine Edge" NOT create a new layer or anything like that?
When I'm scrolling through my Layout tabs using the arrows on the bottom left of the screen, if I'm scrolling right I have to click the arrow at a certain speed or it gets hung up on one tab and won't scroll any further. If I'm scrolling left, it only lets me scroll as far as the active tab and then it fades both the "left" and "skip to end left" arrows and won't let me scroll at all. And both directions, unless I'm clicking very slowly on the arrows, instead of scrolling it highlights the name of the tab as though I've clicked "Rename".
View 3 Replies View RelatedI'm new to C# but I'm trying to get a list of the selected layout tabs. Any example in C# or VB.NET.
View 3 Replies View RelatedHow to organize multiple layout tabs. My problem is I need to plot 50 different looking bits from one main plan and need to save the layouts too for future reference..Creating 50 layout tabs in paper space does not seem the best way to do it.
View 7 Replies View RelatedI am working with a large file for a construction project and am looking to archive my layout tabs after producing each phase of deliverables (output).
Is there a way to do this? I do not want to have to "screenshot" my .dwg and save it with the layouts and then delete and keep working in my working file. I'd like to keep everything in one file.
For some reason our layout tabs keep re-arranging themselves. All of a sudden our sheet 2 ( or what ever) is between tabs for sheets 35 & 36 (or where ever it wants to be).
we use tabs because 45 sheets of images require never ending scrolling. the current tab is never the image shown....they always start at the 1st tab?
when you are on sheet 40 and want to go to 44.....scroll .
I am using 2013 and it wont let me rename the layouts . I have just 10 layouts and it will let me rename one but not the others. The others just flash the little blue color and back to black.
View 2 Replies View RelatedI am currently working on a large drawing that has many tabs (145), I have made a mistake midway and would like to find a way I can rename them quicker than "Right Clicking" on each tab to change it. That will be very time consuming.
Also, is there a way to print a list of all of the current layouts within a drawing.
I would like to be able to consolidate my layout tabs. I have a drawing of a factory that is of some size and the plant is continually growing. I like having all of my information in one place as the drawings (one .dwg file) change. AutoCAD is not capable of doing so? I'm not willing to break up into separate dwg files either.
View 4 Replies View RelatedI'm trying to read objects on a specific layout in an external drawing.
Reading the external drawing is not a problem when the objects are in "*Modelspace".
But finding the specific layout id and throwing that in an Blocktabelrecord is.
Here is the code.
Dim NaamDwg = "C:Program FilesAutodeskAutoCAD 2011SampleDatabase Connectivitydb_samp.dwg"
Dim strLaagNaam = "FURNITURE"
Try
'' **** Contact maken met externe tekening ****
Dim Xdwg = New Database(False, True)
[code].........
My layout tabs are missing. How do you get them back?
View 9 Replies View RelatedI have this drawing with over 200 layout tabs. (I do shop drawings for a cabinet/countertop manufacturer, and we do one drawing per project.) Here's the thing... I need to eliminate pages 1, 6, 14, 20, 24, 30, 40, 44, 47, 56, 61, 64, 73, 78, 81, 90, 95, and 101 because they are now NOT a part of the project.
In my title block, I have the layout name as a field, so it says "PG [layout tab name]/224" which is needed because there's a table of contents for the pages that are printed.
Is there any easy eay to renumber all the tabs, or am I stuck re-numbering every single one?
AutoCAD Mechanical 2013 SP2
AutoCAD 2013 SP2
Can we plot in AutoCad 2005 All Layout Tabs.
I know we can do it in AutoCad 2004.
I am looking for tools be it tips and tricks or lisp that can make the most of layout tabs especially when I have many layout tabs in my dwg.
View 1 Replies View RelatedIs it at all possible to switch between layout tabs by a command? I'm messing around with a .bat file that creates a script for printing that only prints layout1.
The CAD file I'm trying to print has multiple tabs and all tabs have a different name, Lot 02, Lot 03, Lot 04 (not the standard layout1, layout2, etc).
My husband is having an issue where his layout tabs have disappeared yet he has them turned on in the Options menu. He has closed and opened his drawing, restarted his PC and still no tabs. They should be there yet they are not there. All of my searches have returned the standard answer of turning them on through the options menu but this is not fixing it. Only thing I can think of is to roll his PC back through a restore...
View 9 Replies View RelatedOnce you have multiple layout tabs its very easy to zoom in on a tab make some changes jump to another tab zoom in make some more changes, then save the dwg.
You then open the drawing to say plot and have to zoom e the layout as a glance to see if its correct, etc.
So I wrote this tiny lisp that will very quickly zoom extents on all layout tabs and then I would normally save.
; goes through all layout tabs and zooms all
(vl-load-com)
(command "_.pspace")
(setq curtab (getvar "Ctab"))
(setq this_dwg (vlax-get-acad-object))
(foreach d (layoutlist)
(setvar "CTAB" d)
(vla-ZoomExtents this_dwg)
)
(setvar "ctab" curtab)
(princ)
I clicked "Hide Model and Layout Tabs" to see what it would do, and now I can't get them back. Not only did I lose them in that drawing, I lost the tabs in EVERY drawing and EVERY version of C3D. I googled the problem and every forum says the same things, and I've tried them without success:
Options >> Display >> Layout elements >> Display Layout and Model Tabs
CUI >> Workspace Properties >> Model/Layout Tabs >> On
I'm lacking a couple of icons on the lower tray to the right of the Model/Paper button.
The baffling thing is that I've lost the tabs on ALL versions of C3D. Is there a magical command line entry that will bring back my beloved tabs?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
Pertaining to the title. I somehow did something which has caused my model/layout tabs to disappear! How do do I get them back?
View 2 Replies View RelatedWhen I create drawings, I generally have quite a few layout tabs. Also, thse tabs are numbered 1 through to N. On many occasions, a revision or addition may be necessary and it may have to be inserted in between two existing tabs. Doing so is not a problem, however, keeping the numbering sequence in order without having to rename every tab in that file is a problem.
View 7 Replies View RelatedI want to be able to select all my viewports in all my layouts at the same time. Is this possible? Qselect only catches objects in the current tab.
View 9 Replies View Related
