I am using Windows 7 64 bit laptop. When I close a drawing just after saving in AutoCAD 2013 64 bit, the program crashes. This will happen with one drawing open, or several. I also had this problem with 2011.
I have been using AutoCAD for 16 years and never had this problem with previous versions on earlier operating systems.
About 50% of the time, I get a crash when closing a drawing. When this happens, I get the following message: "AutoCAD LT Application has stopped working". This has been going on for sometime now and sometimes I am prompted to report the error, sometimes not. Everything shuts down, so if I have several drawing files open, I will loose any changes made unless I do a hard save for each one (which I have gotten used to doing).
I have the same problem with my license of Architectural Desktop 2004. My version of LT is 2011, running Windows 7 Pro, 64 Bit.
The program shuts down every time I save and close a drawing; this way I am loosing any other drawing that is still open.
I am working on a 64bit Widows7.
After upgrading/switching my stand alone license from Civil 3D 2011 to Map 3D 2013, my computer is crashing before a complete opening of some larger dwgs (1575 KB). Sometimes I get an Out of Memory message.Other (much smaller) drawings open fine.The switch from Civil to Map was made because we were not using any of the civil bells and whistles that make it unique.
Map suits our needs. We use shp files (data connect) to generate most of our work.I can use another computer in our office that has Map 3D 2011 and am able to open up any of the drawings with no problems. Because I had no issues with Map 3D 2011, I thought moving up to 2013 would be "easy".
We have a subscription and every couple of years try to load up the latest and learn to live with it.Now I am wondering if we can all just go to Map 2011 and forget 2013.
A colleague was working on a drawing yesterday in AutoCAD 2013 when it crashed. Since then the drawing has refused to open in AutoCAD 2013. It also does not open Trueview. It will however open in previous version of AutoCAD. We tried to export it to .dxf as well but they are corrupt. We also tried to attach it to a new drawing as an Xref and as a block, both were met with an instant fatal error and the closure of AutoCAD.
We have tried auditing, purging, resaving, using backs-ups. None of them will open in AutoCAD 2013 any more. The drawing closes without attempting to open with no error messages. It just loads up the default drawing(x).dwg.
I'm having an issue with Inventor crashing every time I attempt to follow this exact procedure:
1. I have a drawing open with an iAssembly or iPart in it.
2. I edit a view by double-clicking the view, opening the 'Drawing View' dialog box.
3. I open the 'Model State' tab.
4. In the 'iAssembly/iPart Member' menu box, I select a different member.
Now, it may or may not open the 'Save' dialog box. If it does, then I click 'OK' and poof, Inventor crashes without fail, asking to send in a crash report.
The same thing happens if I start a brand new drawing and attempt to follow the same procedure while inserting a Base view.
Now, I know for a fact that the not all of the drivers are not up to date on my computer, I am not using a recommended graphics card, and I am using SP1.1, not SP2. I have notified my IT guy about this, but he has yet to get back to me. I don't now if/when everything on my computer will be updated. I do not have admin rights to my computer.
In the mean time, Inventor has become essentially useless for me until this issue has been resolved. how I can get these drawings to start working?
I tried twice to close a project (in VS PRO X3) but the program stuck and a message appear (you can see it in the attached file).
View 1 Replies View RelatedI am using Inventor 2014. I am receiving an error while closing a drawing. The error says "One or more drawings are being computed and are currently in raster state. The document(s) may be closed and pending updates will resume when the document is reopened.
Do you wish to continue closing?"
The drawing shows outdated views which I tried updating but they do not update. When I am trying to print the drawing, it shows incomplete drawing.
My AutoCAD closes down when closing a drawing (yes I AM selecting the right x). It happends with larger drawings and more often in layouts.
View 2 Replies View RelatedMy ACAD 2010 LT crashes about 75% of the time whenever I close a drawing. I’m running Windows 7. System info below:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CAD-PC
System Manufacturer Gigabyte Technology Co., Ltd.
System Model GA-790XTA-UD4
System Type x64-based PC
[code]....
All updates that I can find have been downloaded and installed.
2012 LT about a year old, just recently started shutting off/closing unexpectedly during a drawing command (pline, copy, offset etc...) or when using numeric keys on keyboard. seems like everything else works ok. no error messages. nothing. just dissapears.
View 6 Replies View RelatedI have a prob with my system in that when I close a drawing with a 3d view in a viewport and reopen it, I lose the 3D view and it flattens out, maintaining the view but losing all perspective. I can easily restore the saved view, but it is bit irritating.
View 4 Replies View RelatedQuick one on Dynamic blocks.... we are using Dynamic blocks more and more as a company, we are finding that when in a drawing which contains lots of dynamic blocks, then go into Dynamic Block Editor - amend the block - Then when closing the block Editor to get back into the drawing the drawing goes really slow untill we close it down and restart it.
Is there a setting we need to change OR is there something obvious that we are missing. i.e should we be minimizing the amount of dynamic blocks in our drawings or uncomplicate them?
I am using Autocad 2014 Architecture and have a 3D drawing with approximately 70 surfaces. If I close the drawing and reopen it 10 to 15 of the surfaces has disappeared. What this could be?
View 9 Replies View RelatedWe sold a customer a new Dell Precision Laptop - i7 16GB Memory, 512GB Solid State hard drive, Windows 7 64bit. He had upgraded to AutoCad 2013 from 2006. Since installing the laptop when he closes out of a drawing Autocad crashes, windows reports that the program had unexpectedly quit. It doesn't do it all of the time, but it could have something to do with multiple drawings, plotting etc, but it's not an easy one to generate. He does have an older plotter - DesignJet 500 that's installed through a network share off of another computer however I did completely remove the printer / driver and the issue was still occuring.
View 2 Replies View RelatedSubject pretty much sums it up. AutoCAD will crash 8 out of 10 times when I close a sheet set. This problem just recently started and the only thing I've installed was AutoCAD Map 3D.
View 3 Replies View RelatedI get this common exception while debugging right after I close AutoCAD. I have not even run any commands that belong to my project, just open AutoCAD and Close AutoCAD.
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 1 (Access Violation Reading 0x89a63aa8) at address 775E32D0h --------------------------- OK ---------------------------
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 80000003 (80000003h) at address 776540BFh --------------------------- OK ---------------------------
Call Stack:
[In a sleep, wait, or join] > mscorlib.dll!System.Threading.WaitHandle.WaitAny(System.Threading.WaitHandle[] waitHandles, int millisecondsTimeout, bool exitContext) + 0xb6 bytes System.dll!System.Net.TimerThread.ThreadProc() + 0x2d6 bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool ignoreSyncCtx) + 0xdc bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state) + 0x3b bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart() + 0x4d bytes [Native to Managed Transition]
I turned off the command line because I don't use it or need it on my screen. But each time after I do a plot preview the stupid thing automatically turns itself back on.
Is there a way to permanently turn this thing off because apparently hitting the "x" on the toolbar isn't working correctly.
Also, why did they do away with the flyout option on the commandline. At least then I could dock it somewhere and collapse it.
We are currently using autocad 2013 LT on windows 7 64bit. The program runs a bit slower than 2012 but the main issue is as follows.
when closing a drawing or multiple drawings (wether they have been recently saved or not) autocad will go into a "not responding" mode and then crash out. This happens at about 70% of the time and is completely random. It may crash a drawing one time but not the next time you are in the same drawing, or when closing multiple drawings may allow you to save some of them when cad closes but then crashes before all of them are saved. We have all of the current updates and fixes. We had the same issue with 2012 but not nearly as often.
I am operating 3D Civil with Windows 7, 64-bit system.
Most of the time when I close a drawing, particularly when I have two or more drawings open, the program closes down with the following message "Autocad Application has stopped working - Windows is collecting more information about the problem"
I then have to restart 3D Civil
I have problem with 3 users from about 75. When using the publish command inAutocad 2010 (1 user) and Civil 3d 2010 (2 users) a temporary copy of the drawing is opened while the particular layout is being published but on completion this temporary copy of the drawing is not being closed. This is leading to problems when a user has lets say 5 drawings open that require publishing. When finished the user has 2 copies of each drawing open and sometimes my select the wrong drawing when making further changes.
I have tried a repair on Autcad but that did not work.
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
We are experiencing a problem that inventor goes none responsive when closing large assemblies. Typically the problems occurs on assemblies with typrical over 3000 parts. The only way to get out is to manual crash the program.
Our machines are some of the powerful machines that you purchase on the market with SATA III solid state drives so the problem is not with the machines.
Wish we never upgrade from 2012, Autodesk should be embarrassed with the performance of 2013
AutoCAD 2013, 60-90 days into it, upgraded from 2007.
I have 2 of 4 workstations with this issue, AutoCAD will automtically save the file when the files is closed, w/o any prompts to verify of we want to saved or not.
I have my Options|Autosave turned off, but this should not affect the save on close it should only create a continual ac$ backup file.
This is now the 2nd time this has occured. In early March we noticed this and in dealing with AutoCAD (Suscription Service) we finally deceided to restore AutoCAD to factory defaults, which did fix the issue at the time. However it also meant that I needed to retore all the pathways and our standards. Once completed, I paid particular attention to ensuring that AutoCAD was NOT saving the file on close and it was doing so up until earlier this week, when I noticed it SAVING on close again.
Now most of you might think, hey thats a good thing, however, we routinely will test modifications to our layouts on our working files, but dont want to actually modify those files and then we would simply close the drawing w/o saving thus ensuring that those mods were not saved.
In March, both 2007 & 2013 did this, however only my 2013 is affected now.
My AutoCAD 2012 installation has been doing this for a while, but I don't remember it always doing this:
After I close a drawing (if it is the last drawing open), by using either the "close" command or by clicking the "x" on the window, instead of going to the generic gray-stripe background it just shows what the drawing looked like before close. This keeps messing with my head, as I think AutoCAD has just stopped responding.
If you look closely, though, you can see that the "AutoCAD" and "Autodesk" labels appear on the drawing, but I don't immediately notice this because my drawings are more complex than the sample drawing I've attached.
See images below.
However, when I manually resize the application window (either by restoring or maximizing, or by draging the window edge, the application window refreshes to show the proper generic gray-stripe background.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
Say I have a model and some layouts in a file.
I open the file to the model. My RAM usage is about 33%. Next, I open the first layout and my usage climbs to 43%. I open the second layout and my usage climbs to 52%. I open the third layout and my usage climbs to 62%.
I can go back and view the layouts already opened marginally faster then when first opening them, and my RAM usage will not increase.
If I continue to open new layouts, my computer will spend all its RAM holding these and freeze. My computer will suspend graphical processing and be forced to run on sips of RAM until all active commands are finished. But RAM usage will never decrease.
I have been working with my Windows Task Manager open in the corner, watching this happen. This way, I can save and close the file to clear the RAM and then proceed to reload the file and continue working on my file with 34 layouts.
I do not know if it is a function of storing the UNDO functions, or just how the program is designed, but this is a problem for me.
QUESTION
Is there a way to clear the UNDO or layout memory without closing and reloading the file? I do not have to close AutoCAD - just the file.
ATTACHEMENT
The attachement is a screenshot of my Task Manager.
I started with TM, browser, and AutoCAD open (I had already started writing this post)
I opened the file to the model.
Opened up 6 layouts (you can see the bumps)
Saved (you can see the tiny rise)
Closed the file, but not AutoCAD (precipitous drop ;] )
Lastly, I reloaded the file.
Windows 7 64bit w/ 64bit AutoCAD 2013
My girlfriend has a problem with AutoCad 2013 students version. After attaching pdf file in underlay option AutoCad crash. She's got macbook air with system version OS 10.9. She had not ever problems with pdr iunderlay before.
View 1 Replies View RelatedWe have just loaded the following the this order, AutoCAD2013, Revit MEP then Navis Simulate. All 2013. Everything works, including the NWC export from Revit MEP and the export from AutoCAD.The problem is that when you submit the NWNAVIGATOR command, Autocad thinks about it and then crashes out of AutoCAD. We have switched off the Hardward drivers.
View 4 Replies View RelatedI am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
View 5 Replies View RelatedI need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies View Related