AutoCAD 2013 :: 2014 Crash On Startup Screen
Jul 10, 2013
I recently gave my windows a factory restore (fresh start windows original copy), I had no issues with autodesk software before the windows fresh start (i use Revit and 3Dmax too), i even installed and used Autocad 2014 on my laptop before the restore and it ran just fine, problem is now after the windows restore Autocad crashes everytime i open it, installation was smooth and succesfull with no error warninings whatsoever; the problem comes when i start Autocad 2014 for the first time, the initialization window opens and starts loading the files but then (everytime) crashes and freezes my laptop forever, not even the task manager is posible to open
My Specs:
Laptop: Alienware M14x R2
Processor: intel i-7 @2.30 ghz
16 gb RAM
Graphics: Nvidia GeForce 650M 2GB
running on Windows 7 64-bit
after the restore i downloaded the latest drivers for my graphics card, so that shouldnt be the issue, i also switched the processing tu GPU only.
i already tried lots of solutions i saw on other posts, but none seems to suit my need, i tried the .NET framework thing, switching off the windows Aero theme, but the problem remains the same, it still freezes completely my laptop everytime i try to run Autocad 2014, i even tried installing Autocad 2013, Autocad 2011 and Revit 2014 but the issue is the same in all of them they freeze at startup without any pop up error warnings, just freezes.
View 6 Replies
ADVERTISEMENT
Jun 6, 2013
We are launching Autocad 2014 in a multiuser environment and trying to determine how to stop the WELCOME screen from appearing.
The /nologo switch is for a different screen. Need per user or prefer per computer registry setting to turn off the Welcome Screen.
Thought it was InfoCenteron key,set to 0, but that was not it.
Thought it might be MC3 key, but not there either.
View 2 Replies
View Related
May 18, 2013
I have been trying to install and run a student version of AutoCAD 2013 on my computer and it keeps crashing/freezing at the first startup after installation, and never works after that. Installation is all fine and smooth. Starting the program however takes a few seconds to load the plugins then it hangs at the loading screen forever. I've tried turning off the loading screen but the program itself just crashes and appears to be "Not Responding" anyway. I've tried uninstalling all Autodesk products and only install AutoCAD 2013 but it's still not working.
As for my computer, it runs Autodesk Inventor 2014 very well. Specification-wise:
Windows 7 Professional 64-bit
Intel Xeon E31220 3.10GHz
RAM: 16GB
NVIDIA Quadro 600
View 5 Replies
View Related
May 17, 2013
The big problem is that when am doing whatever work, the program stop working and show a error message, that says: ERROR FATAL: Unhandled access violation writing 0x000 exception at 70601612h
[URL]
And it happens when i'm on any kind of views or after printing..
My Pc is an: Intel Core i3-2100 CPU @ 3.10GHz
4gb Ram
Windows 7 ultimate x64 bits
I DON'T HAVE AN VIDEO CARD. I use the one that provide the Motherboard.. Thats Intel HD Graphic 2000
View 1 Replies
View Related
Sep 19, 2013
We use 2012 primarily, and I finally installed 2014 on 2 different machines. Both work ok until I load the 2012 profiles. Then, AutoCAD wont even start after you close and re-open. We use a lot of custom lisps and menus that i need loaded into 2014.
View 3 Replies
View Related
May 17, 2013
I have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
View 9 Replies
View Related
Jun 28, 2012
After an AutoCAD/Windows crash, I reboot. The system begins to load Windows (Win 7 splash), then the screen goes blank and a white Windows cursor appears -- nothing more; no desktop or taskbar.
Control-Alt-Del does nothing, however, the HDD light continues to flash as if it is continuing to boot. The same thing happens when I boot in Safe Mode (except cursor is larger due to different resolution).
I can boot from bootable CD and everything works fine. HDD scan and memtest both pass. I formatted the drive and reinstalled Windows and AutoCAD and everything works fine. However, two days later, the same exact problem occurred on the second of five workstations.
Details:
Win 7 Professional 64bit
MS Office Home and Business (with Outlook configured for IMAP)
i7 processor, 6GB ECC RAM, Nvidia Quadro 600 w/1GB RAM.
AutoCAD 2013 was originally loaded from a trial version, then purchased license key installed.We are using Xref on a file server and opening drawing on a file server across a ethernet Gbit lan.
View 3 Replies
View Related
Mar 18, 2013
I changed the 'startup' value from 1 to 2 in ACA 2012, now program crashes. On start up it displays the first error message 3 times (see attached), then opens a blank drawing. Once a select a file it displays the second message 70 times then opens the drawing. After a few seconds a fatal error message is displayed and program closes.
Error messages are the same other than address location changes.
I have tried a repair and a reinstall to no avail.
View 2 Replies
View Related
Feb 8, 2013
Civil 3D 2013, SP1.
Set STARTUP to 2, and make sure the Sheet Set Manager palette is visible.
Close Civil 3D, then restart it.
It should open in a zero-document state, with the SSM palette visible.
Now open a sheet set, and double click on a sheet in the SSM to open it.
When I do this, I get four "Unhandled Exception" dialogs in a row, then C3D disappears (crashes!)
View 5 Replies
View Related
May 20, 2013
See Attached.
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
View 4 Replies
View Related
Jan 10, 2013
my tool palette causes a systematic crash at startup .
is there a way to launch without opening toolpalettes .?
View 5 Replies
View Related
Oct 11, 2012
Know it's old, but have been using Photoshop CS 8.0 on office Mac Pro and home iMac for years with no problems. OSX is 10.5.8 Leopard. Still works fine on Mac Pro, but has just started crashing at startup on iMac for no apparent reason. Graphic layout comes up and then shuts down. Reinstalled the application with same result.
View 1 Replies
View Related
Nov 13, 2011
I change my motherboard ans proc and memory yesterday, but i don't reinstall windows seven, and now i don't have time to reinstal windows now.Before change my motherboard, 3ds x64 worked good, and now he crash on startup with the report error on jpeg attachement.
3dsmax_minidump.dmp
dmpuserinfo.xml
dumpdata.zip
(and it's written version 3ds max 13 - 64bits)
But 3ds max 2011 x32 works very good I need 3ds max 2011 x64 for use the plugins hair farm.
I already reinstall a several times 3ds x64 but nothing, et try to remove the three dmp, xml, and zip, and also put on Open GL
windows 7 ultimate x64
intel i7 2600 3.4 ghz
8,00 gb ram
geforce 8800 gt
View 1 Replies
View Related
Jul 13, 2013
Have tried on several machines with same result.
Have to manually reload xref after opening drawing to get sections to change.
Autodesk, Can I get some confirmation that it is working, or not?
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
View 4 Replies
View Related
Nov 25, 2008
OS: vista 64bit (all latest updates)
nvidia 8800gts 512 (driver 180.48)
8 gb RAM + latest mobo bios
It was working totally fine then WHAM! I noticed it first when i minimized it to the taskbar to look for some other files on my desktop. now it suddenly doesn't want to start. the 'only' thing is that the pc went into hibernation while i was at lunch a few times this week (can't see that having an effect)
I start it up and it crashes +/- after 8 seconds. EVERY time.
- Tried using the "run as admin" = didn't work (tried it just in case)
- tried changing a few settings in nvidia control panel = nada!
- once i got it open within the 8 seconds, I turned off openGL completly = nada!
- I've used the "DisallowOpenGLWindows_OFF.reg" just in case and that doesn't work either. (its a pretty recent GFX card)
all other cs4 apps (master suite) are working fine!
this exact same thing happened just before i reinstalled vista x64 about a month ago.
View 39 Replies
View Related
Sep 6, 2008
It crashes before it even finished loading. I haven't even gotten the program to work once. Yes, I uninstalled and reinstalled. I have no printer, and I'm using Vista 64.
This is what it says.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 10.0.0.0
Application Timestamp: 4601eae8
Fault Module Name: dlbktwds.ds
Fault Module Version: 3.107.0.0
Fault Module Timestamp: 45df4d5a
Exception Code: c0000005
Exception Offset: 00004da2
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
View 28 Replies
View Related
Nov 1, 2013
I get the following crash meassage on booting AE 12.1 from Mavericks
I have re-installed & trashed Prefs.
View 3 Replies
View Related
Jul 19, 2013
My Application is migrating from autocad 2011 to autocad 2014.Once i rename the drawing.It throwing fatal error and crash again and again.
View 5 Replies
View Related
Nov 29, 2008
In a moment of lax attention I've done something stupid to the Photoshop CS version (original 1) and told it to search C:/programfiles for plugins whereas I meant to tell it specifically where to look.
So now it crashes when it gets to the 'Scanning for Plugins' part and of course I can't alter it back to what it should be.
Now when I run Image Ready the plugins are still as normal...
System Restore doesn't change the settings. Uninstall of the Photoshop component doesn't put it right either.
(maybe uninstall/reinstall the entire CS suite - but I guess even then it will still have the bad settings)
So is it a registry thing and if so what needs to be done to stop it searching the entire hard drive programs for plugins.
View 3 Replies
View Related
Feb 22, 2012
The company I work for has just switched to Max2012 but my machine has a problem with it. I get this error on startup and whenever I open and close the ribbon:
-- Unknown property: "validobjfunc" in #StructolyBoost(undefined:<data>;Public)
It throws open the max script editor window and a message prompt saying the above text. If I press OK, the message goes away. When I close the editor the message comes back and we have a loop!
To get around it I can press OK. Then run script and go to max root > stdplugs > stdscripts > PolyTools.ms
I looked around and saw people had this error on previous versions of max and the fix was to place a copy of polytools.ms in the startup folder. I tried this and polytools.ms crashes instead on startup. To me from the error given it looks like the ribbon isn't loading a script somewhere that it should do. Placing it in the startup folder makes sense as a temporary fix but in this case it doesn't work. I can run the script after every time max has loaded but this is inconvenient and means I can't do any batch operations which I do quite often.
My PC specs are Win XP x64 SP2, Xeon W3550, 12gb ram, quaddro 3800 and dual screen monitors, I also use a Wacom tablet.
The problem happens in both x64 and x86 installations of 3ds max. We have reinstalled 3ds max countless times. My colleagues have identical computers, hardware wise, haven't had the same issues. We're using SP2 patched 3ds max 2012 too.
View 1 Replies
View Related
Dec 2, 2013
This crashing of ACA 2014 on start-up is getting old.
A few times we thought we had it fixed only to have it return with a vengeance.
Seems to crash after loading Project Navigator files. Error log attached.
View 5 Replies
View Related
Jun 4, 2013
Even though I have unchecked the 'Show at startup' box, the Startup dialog loads every time - is there some other way of preventing it from appearing?
View 5 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Feb 10, 2009
I have used "Share My Screen" meeting feature a few times on my machine.
a client and it gave me the blue screen of death crash and forced a restart. After it did this 3 times I gave up.
Windows XP Home 2002 SP3
PhotoshopCS4 Extended
CS4 Production Premium
RADEON X300 SE 128MB Hypermemory
Intel Pentium (R) CPU 3.00 GHz 2.99 Ghz
2.50 GB RAM
View 3 Replies
View Related
Aug 26, 2013
I have PSP 15.2.0.12, win 7 64-bit machine with ample power and graphics card. Regularly run multiple CAD programs and so on.
When I double-click the desktop icon to launch the product it crashes - always.
When I double-click an image in Windows Explorer, it launches OK and opens the file with the Edit tab active.
How to resolve the dbl-clk desktop death?
View 4 Replies
View Related
Jun 15, 2012
One of my end users reports to me that his computer has been crashing. We soon learn that it crashes every time he starts AutoCad LT 2006.
What I have done so far is completely removed autocad and all associated programs. Reinistalled, installed a newer version (Autocad LT 2007), upgraded to the latest bios and firmware on the machine. Replaced the RAM, and just about everything else under the sun and this machine still crashes every time you start auto cad. I asked the user when the last time was that it worked and he said he was using it about a month ago just fine.
I installed the program on my identical laptop and it works just fine.
I ran the BSOD via Kernel mode through WinDBG and it points to ACPI.SYS. Being that this is a heavy system driver file, need getting this program to actually work short of me reinstalling the entire OS on the machine? The stop error is the 0x00000050 memory error.
View 9 Replies
View Related
May 3, 2011
I know that this sounds petty, but when i open up Autocad 2011 the grid is small and doesnt fill the entire screen like it use to or like it does in class. What settings should i check and change?
View 3 Replies
View Related
Sep 3, 2013
Expired Subscription - Inventor Hangs on startup screen.
I have Autodesk Inventor 2013 Design Suite. Everything has been working fine until my subscription ran out. Inventor has been hanging on the startup screen since then (this may just be a coincidence) most of the time it take between 15 minutes to 30 minutes to open. When it does open everything works fine.
System is
Windows XP Professional x64
Version 2003
Service Pack 2
Intel Core Duo CPU
2.98 GHz, 8.00 GB Ram
View 9 Replies
View Related
Dec 19, 2013
I just upgraded 17 workstations to Product Design Suite 2014.
On one of the workstations, the Autodesk privacy policy and the welcome screen pop up on every startup. I even tried running it as administrator first, but no matter what I do, those screens keep popping upm highly annoying for the user.
I already uninstalled and reinstalled the entore product design suite, this did not solve the issue.
View 5 Replies
View Related
Oct 25, 2013
running autocad 2014 lt in windows 7. I ran trail program which was prefect. When I downoaded the program from a CD the screen is fadded or pale. How can I get black screen with shape images?
View 3 Replies
View Related
Jan 19, 2014
I installed Mavericks and decided to update to Illustrator CC. It downloaded fine and when I went to launch it it opened up to the promo screen showcasing the new features like rounded corners and the segment editing tool etc. When I go to click the "Done" button Ai CC crashes. Nothing I do resolves this. So I ran uninstall and re-installed it and the same exact thing happens every single time.
A few points of fact:
- I have NO PLUGINS installed for Ai CC
- I do have Ai CS5 installed (Need this to access old art in my archive that is FreeHand format)
- I have Ai CS6 installed (Because most of my clients aren't on Ai CC yet)
- Photoshop CC works fine
- MUSE CC works fine
I uninstalled Ai CC again and the past two days had a MAC IT specialist come in and clean up my entire system to make sure it's in perfect condition before I downloaded and tried to install Ai CC again. My system hasn't been this fine tuned since I installed Mountain Lion, everything is working great.
I tried to install Ai CC again and the exact same thing happened it crashes at the promo screen. When I go and click the "Done" button the beach ball spins and the whole app goes down. Every single time with no exception.
Ai CS6 works fine, no problems at all.
Here is the crash report generated when I last tried to install Ai CC: [URL]
My system information is here too in case you need to know machine specs: [URL]
The inane "Adobe Customer Care" on twitter isn't cutting it with their scripted responses that solve nothing and blame everything on the user.
This is really getting old and I've wasted two days of work time because what should be simple, simply is not.
View 8 Replies
View Related
