I just upgraded 17 workstations to Product Design Suite 2014.
On one of the workstations, the Autodesk privacy policy and the welcome screen pop up on every startup. I even tried running it as administrator first, but no matter what I do, those screens keep popping upm highly annoying for the user.
I already uninstalled and reinstalled the entore product design suite, this did not solve the issue.
Expired Subscription - Inventor Hangs on startup screen.
I have Autodesk Inventor 2013 Design Suite. Everything has been working fine until my subscription ran out. Inventor has been hanging on the startup screen since then (this may just be a coincidence) most of the time it take between 15 minutes to 30 minutes to open. When it does open everything works fine.
System is
Windows XP Professional x64
Version 2003
Service Pack 2
Intel Core Duo CPU
2.98 GHz, 8.00 GB Ram
Even though I have unchecked the 'Show at startup' box, the Startup dialog loads every time - is there some other way of preventing it from appearing?
View 5 Replies View RelatedOne of my end users reports to me that his computer has been crashing. We soon learn that it crashes every time he starts AutoCad LT 2006.
What I have done so far is completely removed autocad and all associated programs. Reinistalled, installed a newer version (Autocad LT 2007), upgraded to the latest bios and firmware on the machine. Replaced the RAM, and just about everything else under the sun and this machine still crashes every time you start auto cad. I asked the user when the last time was that it worked and he said he was using it about a month ago just fine.
I installed the program on my identical laptop and it works just fine.
I ran the BSOD via Kernel mode through WinDBG and it points to ACPI.SYS. Being that this is a heavy system driver file, need getting this program to actually work short of me reinstalling the entire OS on the machine? The stop error is the 0x00000050 memory error.
I recently gave my windows a factory restore (fresh start windows original copy), I had no issues with autodesk software before the windows fresh start (i use Revit and 3Dmax too), i even installed and used Autocad 2014 on my laptop before the restore and it ran just fine, problem is now after the windows restore Autocad crashes everytime i open it, installation was smooth and succesfull with no error warninings whatsoever; the problem comes when i start Autocad 2014 for the first time, the initialization window opens and starts loading the files but then (everytime) crashes and freezes my laptop forever, not even the task manager is posible to open
My Specs:
Laptop: Alienware M14x R2
Processor: intel i-7 @2.30 ghz
16 gb RAM
Graphics: Nvidia GeForce 650M 2GB
running on Windows 7 64-bit
after the restore i downloaded the latest drivers for my graphics card, so that shouldnt be the issue, i also switched the processing tu GPU only.
i already tried lots of solutions i saw on other posts, but none seems to suit my need, i tried the .NET framework thing, switching off the windows Aero theme, but the problem remains the same, it still freezes completely my laptop everytime i try to run Autocad 2014, i even tried installing Autocad 2013, Autocad 2011 and Revit 2014 but the issue is the same in all of them they freeze at startup without any pop up error warnings, just freezes.
I know that this sounds petty, but when i open up Autocad 2011 the grid is small and doesnt fill the entire screen like it use to or like it does in class. What settings should i check and change?
View 3 Replies View RelatedWe are launching Autocad 2014 in a multiuser environment and trying to determine how to stop the WELCOME screen from appearing.
The /nologo switch is for a different screen. Need per user or prefer per computer registry setting to turn off the Welcome Screen.
Thought it was InfoCenteron key,set to 0, but that was not it.
Thought it might be MC3 key, but not there either.
I installed Mavericks and decided to update to Illustrator CC. It downloaded fine and when I went to launch it it opened up to the promo screen showcasing the new features like rounded corners and the segment editing tool etc. When I go to click the "Done" button Ai CC crashes. Nothing I do resolves this. So I ran uninstall and re-installed it and the same exact thing happens every single time.
A few points of fact:
- I have NO PLUGINS installed for Ai CC
- I do have Ai CS5 installed (Need this to access old art in my archive that is FreeHand format)
- I have Ai CS6 installed (Because most of my clients aren't on Ai CC yet)
- Photoshop CC works fine
- MUSE CC works fine
I uninstalled Ai CC again and the past two days had a MAC IT specialist come in and clean up my entire system to make sure it's in perfect condition before I downloaded and tried to install Ai CC again. My system hasn't been this fine tuned since I installed Mountain Lion, everything is working great.
I tried to install Ai CC again and the exact same thing happened it crashes at the promo screen. When I go and click the "Done" button the beach ball spins and the whole app goes down. Every single time with no exception.
Ai CS6 works fine, no problems at all.
Here is the crash report generated when I last tried to install Ai CC: [URL]
My system information is here too in case you need to know machine specs: [URL]
The inane "Adobe Customer Care" on twitter isn't cutting it with their scripted responses that solve nothing and blame everything on the user.
This is really getting old and I've wasted two days of work time because what should be simple, simply is not.
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
Every since installing 2013 on my iMac system, I get a pop-up window everytime the computer boots up. Here's the message:
Insecure Startup Items folder detected. Items in the Startup Items folder (“/Library/StartupItems/”) have not been started because the folder does not have the proper security settings.
How do i disable the startup splash screen in elements 9
View 2 Replies View RelatedI have been learning smoke on various machines and different versions of the prereleases and service packs. I'm using SP2 now and II see older local projects listed in the media hub but they don't show up in the start-up screen listing of projects. how to regain access to these projects?
View 7 Replies View RelatedWhere is the privacy setting for the trial version of cs6 photoshop. I would like to turn it off. The answers given by 'Staff' are incorrect - it is NOT located within Adobe Product Improvement Program! I use W7 64bit.
View 16 Replies View RelatedI get error error "Failed to Initialize Stone + Wire connection when I start Smoke 2013. It working fine for 3 weeks.I uninstalled, reinstall, and still cannot get it to work.
Do I need to get a new download? Someone said it may be due to my internet connection.
CS4 Extended. Early 2008 iMac 24", 4 GB RAM, updated to Mountain Lion OSX 10.8.3 in Dec 2012.CS4 (11.0.2) was working fine with no issues until 2 weeks ago. The startup splash screen loads and displays messages about various tools being loaded....
However, it does not go beyond: "Reading Color Settings...." and I get the spinning color ball if the cursor is over the splash screen and a blue spinning ball when the cursor is outside the splash screen.Have to use "Force Quit" to get out of the program.Adobe Acrobat Reader also does not work. Upgraded from Adobe LightRoom LR2 to LR4 and that works fine!
Here is what I have tried:
Uninstalled Acrobat Reader and CS4 Rebooted the computer Re-installed CS4 (legit copy and have serial #) Re-installed Reader Checked for updates on Adobe site and updated CS4 to 11.0.2 Rebooted the computer Started CS4..... Got to the same step "Reading Color Settings..." and the programs hangsThought that some crucial file(s) in the System may have been damaged/corrupted, so...Re-installed Mountain Lion to potentially remove/overwrite damaged filesRebooted the computer Launced CS4 and got the same results as in step 7 above
At least once a day, upon starting up Inventor 2013, it locks up at the introduction display(with the progress bar). I just installed Inventor 2013. Inventor 2012 did not do this.
View 4 Replies View RelatedI'm just setting myself up on a new PC, and updating a few things along the way. I've gone from VS2005 to VS2010 express, and migrated my projects along the way. The migrated projects worked OK, but I've just started a new project and I can't figure out how to add a start up application for my project.
On the Debug tab in Project Properties, there's no option for startup application like there was in VS2005
Inventor CAD Administrator || Autodesk Inventor 2012 Certified Professional
Autodesk AutoCAD 2012 Certified Professional|| Bachelor of Technology (Mechanical)
Every so often when I open 2013 inventor it freezes at the startup window. the "progress bar" at the bottom gets about 75% across, then freezes. If I click on the window it, a dialog box appears that will let me close the program or check online for a solution. It has happened on all 7 machines here.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
I need to import the Custom user commands in the ribbon each time inventor starts up.
I found a thread to import app options en user interface, but nothing to import the ribbon.
[URL]
I have a black bar on the top half of my screen when i render on the timeline after leaving CFX. when I enter CFX everything looks good, but once I am on the timeline I can't se the top half of my footage. This happened when I applied aliasing to the shot, but remained once I removed it. Also when i applied 4xHWAA My entire screen gets blacked out. This also crashes the smoke when rendering.
View 6 Replies View RelatedA project that I will soon start is a two-screen projection composed of 2 HD screens.
I wonder if it's possible to set up Smoke 2013 to output 2 HD streams simultaneously in split mode - one half of a timeline goes to one screen, and the other half goes to the other.
If it is possible, what kind of hardware would this setup require?
i'm trying to link my edl with the correct clips. So when i got a green check icon , indicating that smoke have found the matched clip. But before i link it i just want to make sure that it's the correct clip. So in the bin, the clip is highligted and i double click it to open it up in the viewer. The problem the viewer split control is disabled so i can't do split screen to match that clip with the guide/offline (in the edl sequence i've inserted the guide movie). all i can see i have to link it first then go back to timeline and now i can view in split screen.
View 1 Replies View RelatedWhat exactly should I click to view Channel editor full screen or in a resizable view port?
Currently it is displayed at the bottom put of the UI only and it is not possible to do anything on such a small view of the editor....
Brian Mulligan wrote in this blog:"If you hold SHIFT and double-click in a numeric field that has a keyframe set, then the Channel Editor will open up full screen at the top of the UI and switch to 1 up view. The numeric field you clicked on will be highlighted and framed."
Where is "numeric field that has a keyframe set" actually located?
When I shift and double-click on the numeric field in "Channel hierarchy" (on the left of the Animation curve window) a CALCULATOR pops up.
To hide the top menu bar and use the application in full screen, you must specify this setting in the Smoke Setup utility, which is found in the Smoke 2013 folder. In the Smoke Setup utility, under the General tab, set the Menu Bar option to no. When you hide the top menu bar, certain options, exclusive to the top menu bar appear at the bottom right of the screen. You must restart Smoke after making the change for it to take effect.
why but it feels to much more like a real application again! Hadnt realised just how much I disliked menu bars until now.Now how do I create some color bars?
How can I attach text to a logo that moves from one side of the screen to the other so that the text follows the logo or vice versa? Can one insert a logo into the text module? Or will action have to be used?
View 9 Replies View RelatedI have just installed Smoke Ext 1 and tried Keying with Green Screen Footage. The Master Keyer result is not even close. Is it a bug with the Master Keyer?
View 1 Replies View RelatedI just installed Smoke Ext 1. I noticed that all of my source files on an existing job, that are H264, don't show up...they just have a black screen with audio.
Is H264 not compatible with Smoke?
I have greenscreen footage, where a green screen was put on a window with tracking markers. A person is moving in front of it, so you can see the reflection. If I just key it and put a garbage mask around it, I can get rid of the green and the tracking markers, but how can i get the reflections back now? Cause if I just screen the original desaturated part back on, you can still see the tracking markers.... Is the only way to first paint over the markers and then screen it back on, or is there another way? I'm on Smoke for mac 2012.
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
So I installed TD Inventor Professional 30-Day free trial and I downloaded the installer and went through the download of the installer process and it made an autodesk inventor folder on my desktop. I click on it and it takes me into the C drive under the autodesk file Inventor 2012 TestDrive and has an Application called TDSetup. Once I click on it it does a load wheel then nothing happens.
I can't seem to find a solution and I just installed DirectX.
Well I have tried with different resolutions, but even with the highest one 1366x768 I can´t see all the panels on the Inventor screens. It´s like my screen is to small to show all the windows inventor has.
I attach an image to show the problem, I can´t see what´s under the "point alignment" option, I can´t see the "accept" nor "cancel" buttons.I tried to search on google and here in the forum but I couldn´t find anything, I hope not to ask something has already been asked before.
Simple 1-click feature to publish an inventor file to DWF AND send to the Autodesk 360 account for mobile viewing purposes?
To me this would seem to be one of the primary workflows of an online service?
I am interested to know how others have been publishing their Inventor parts and drawings to 360 for viewing and also potentially whether this workflow is under development in the pipeline.