Photoshop :: CS4 Extended - Startup Splash Screen Loads And Displays Messages Tools Being Loaded?
Apr 16, 2013
CS4 Extended. Early 2008 iMac 24", 4 GB RAM, updated to Mountain Lion OSX 10.8.3 in Dec 2012.CS4 (11.0.2) was working fine with no issues until 2 weeks ago. The startup splash screen loads and displays messages about various tools being loaded....
However, it does not go beyond: "Reading Color Settings...." and I get the spinning color ball if the cursor is over the splash screen and a blue spinning ball when the cursor is outside the splash screen.Have to use "Force Quit" to get out of the program.Adobe Acrobat Reader also does not work. Upgraded from Adobe LightRoom LR2 to LR4 and that works fine!
Here is what I have tried:
Uninstalled Acrobat Reader and CS4 Rebooted the computer Re-installed CS4 (legit copy and have serial #) Re-installed Reader Checked for updates on Adobe site and updated CS4 to 11.0.2 Rebooted the computer Started CS4..... Got to the same step "Reading Color Settings..." and the programs hangsThought that some crucial file(s) in the System may have been damaged/corrupted, so...Re-installed Mountain Lion to potentially remove/overwrite damaged filesRebooted the computer Launced CS4 and got the same results as in step 7 above
I am using Photoshop CS3 on a PowerPC Mac running OS X 10.4.11. Some days ago, I attempted to run photoshop by clicking the icon on the dock.The splash screen loads fine but immediately as the splash screen loads photoshop closes automatically. I have already tried the following:
1. Rename TWAIN file by adding the ~ in front of it
2. Deleting photoshop preferences by using Command+Shift+Option .
Every time I drag an image into Photoshop CS 5 I get the splash screen shown below. I doesn't mater if I choose Yes, or No. I still get this screen. What can I do to prevent this annoying occurrence?
Photoshop CS freezes on splash screen. I have been using this since CS first came out without problems. Now it will not go beyond the screen and locks up with 100% CPU usage. Athlon Barton 2500 w/2G Corsair Ram, 2 - 160G Seagate 7200 HD's configured with Raid +1. All other programs work normally...just PSCS
Should add that I have uninstalled CS and reinstalled it. I have also removed each 1G stick of Ram and tried it...then swaped the other stick...
I am trying to make a 'splash' screen for a GUI. However, the picture I am using pops up with the corners being visible; I do not want that. I would like them to be transparent. I have tried 'Export Transparent Image'
It crashes before it even finished loading. I haven't even gotten the program to work once. Yes, I uninstalled and reinstalled. I have no printer, and I'm using Vista 64.
This is what it says.
Problem signature:
Problem Event Name: APPCRASH Application Name: Photoshop.exe Application Version: 10.0.0.0 Application Timestamp: 4601eae8 Fault Module Name: dlbktwds.ds Fault Module Version: 3.107.0.0 Fault Module Timestamp: 45df4d5a Exception Code: c0000005 Exception Offset: 00004da2 OS Version: 6.0.6001.2.1.0.768.3 Locale ID: 1033 Additional Information 1: fd00 Additional Information 2: ea6f5fe8924aaa756324d57f87834160 Additional Information 3: fd00 Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I just loaded CS3 Photo Shop and Illustrator onto my new 15" Retna MacBook Pro running Mavericks. The programs begin to start up but get hung up at the splash screen.
There's nothing I can do except Force Quit the application. All of the top menu items are grayed out rendering the programs useless.
I've attached a screen shot of what it looks like when Photo Shop loads. How do I resolve this? I've let the applications just sit for over 20 minutes but nothing happens. They're just stuck.
i have two laptops that i've downloaded the CC to and one has Windows 7 the other Windows 8.
i installed the CC on my newer W8 laptop a couple months ago and noticed that the Splash screens are different for Ps & Ia than the ones on my older Win 7 laptop.
i've also noticed there are some new things in Ps on my newer computer like the ability to Sync Preferences, more Fonts and the Properties panel has some new cool features but no matter how many updates that come for Ps on my older Windows 7 computer it doesn't have the newer features.
must i uninstall Ps & Ia to get these cool new features on my older computer too? if so, wouldn't i would lose all my plugins, styles, custom shapes etc.
I have the express tools loaded and it shows in Autocad. But when I try to use a command it says unknown command. I have tried unloading and loading the express tools many times but the commands in express tools aren't working.
Recently Photoshop CS3 Extended freezes when I launch it on my Windows 7 (64 bit) computer. The splash screen appears but then it just stops working (usually on initializing Tools).
I have read several things so far. To fix it I tried:
- disabling the TWAIN plugin
- resetting all tools
- deleting the Photoshop preferences file.
- deleting my printer from the control panel (some others said printer drivers could cause it)
about three weeks ago, maya 2014 started being stuck at the splash screen saying "Maya loading" and doing nothing. I also tried running it with admin permissions, repaired it, uninstalled and deleted AppdataLocal-and-RoamingAutodesk, then installed again. I also tried installing Maya 2013, to see if that starts up: it doesn't. EDIT: I also tried restarting that license program The only thing I can call a reason is: It randomly asked me to license and stuff, after i accidently opened it twice. Then I 'clicked through' (I did read it though) and killed the second process. After that it stopped working.
I have been using Paint Shop Pro for around fifteen years now and have always been very happy with each new version. I tended to upgrade every other version and have been using X2 for the last couple of years. With the recent announcement of Corel's service pack to fix some of the problems of X4, I decided to upgrade.
I uninstalled X2 and rebooted ready to install my shiny new copy of X4. All went well until I tried to start it up. The splash screen appears and starts to load up the components but every time it gets to "Initializing Palletes" it crashes and I get the "Paint Shop Pro has stopped working" and the options to close or go online and check for a solution!
I've tried uninstalling it, repairing the install, and also uninstalling it using the RevoUnInstaller as recommended by df but it didn't work. I also tried installing SP1 to see if it worked but didn't.
I can't even get this thing to start up at the moment. I need it for a few projects I'm working on and am beginning to wish I had left well alone!
I'm also dreading trying to re-install X2 as I can see that having problems if X4 has screwed up any deep-seated settings.
We've got Inventor running on about 12 Win7 x64 machines in a lab and recently one of them has started acting up. Inventor will not get past the splash screen. The Windows event log only says "app hang."
I've tried uninstalling Inventor and manually removing any trace of it I could find from the C: drive and the registry and reinstalling to no luck.
I'm running Revit 2013 on Parallels 8 (Windows 7 x64bit) on a Macbook Pro, it has been working fine for over a year untill today as it freezes on the startup splash screen and the 'SECSplashwnd' becomes non-responsive. Nothing significant has been changed as it was working fine 8 hours ago.
I have tried repairing the Revit installation, restarting windows and mac, uninstalling Microsoft Framework and reinstalling. Problem Details:
Description:A problem caused this program to stop interacting with Windows.
Each time a student try to launch Revit 2010 he gets the splashscreen and then nothing. The application stops lauching ? When we have a look to the Revit log files we can see this error :
' 0:< Initial VM measure: 1934 MB available, 37 MB used 'C 15-Dec-2010 09:46:54.844; 0:< started recording journal file ' Build: 20090917_1515 Dim Jrn Set Jrn = CrsJournalScript ' 0:< DBG_WARN: API Context is inoperable. Revit will not run correctly.: line 427 of .MFCCRS.cpp. 'C 15-Dec-2010 09:46:54.906; 0:< ->InitInstance
So if we want to work with Revit we have to install RunAs and start Revit through RunAs with administrator rights.Students have a mandatory Active Directory profile and even if we give "power user" rights we get the same problem.
I have been using Revit 2013 for a few weeks now. When Revit opens the splash screen appears and the programme loads fine, I then open the file I want to work on. This is when the error message of an "unrecoverable error" occuring.
This used to happen now and then until today which does not open it all. I have seen solutions on other posts but it still doesn't seem to address the problem.
i just subscribed to CC as a student, and i cant get photoshop or illustrator to open. the splash screen loads and goes through, and you can see illustrator and photoshop both open, but close a few seconds later with no prompts or errors. i browsed around and saw something about verdana font, but i have it installed.
