This crashing of ACA 2014 on start-up is getting old.
A few times we thought we had it fixed only to have it return with a vengeance.
Seems to crash after loading Project Navigator files. Error log attached.
I got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
I want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
View 3 Replies View RelatedMy Application is migrating from autocad 2011 to autocad 2014.Once i rename the drawing.It throwing fatal error and crash again and again.
View 5 Replies View RelatedThe big problem is that when am doing whatever work, the program stop working and show a error message, that says: ERROR FATAL: Unhandled access violation writing 0x000 exception at 70601612h
[URL]
And it happens when i'm on any kind of views or after printing..
My Pc is an: Intel Core i3-2100 CPU @ 3.10GHz
4gb Ram
Windows 7 ultimate x64 bits
I DON'T HAVE AN VIDEO CARD. I use the one that provide the Motherboard.. Thats Intel HD Graphic 2000
We use 2012 primarily, and I finally installed 2014 on 2 different machines. Both work ok until I load the 2012 profiles. Then, AutoCAD wont even start after you close and re-open. We use a lot of custom lisps and menus that i need loaded into 2014.
View 3 Replies View RelatedI recently gave my windows a factory restore (fresh start windows original copy), I had no issues with autodesk software before the windows fresh start (i use Revit and 3Dmax too), i even installed and used Autocad 2014 on my laptop before the restore and it ran just fine, problem is now after the windows restore Autocad crashes everytime i open it, installation was smooth and succesfull with no error warninings whatsoever; the problem comes when i start Autocad 2014 for the first time, the initialization window opens and starts loading the files but then (everytime) crashes and freezes my laptop forever, not even the task manager is posible to open
My Specs:
Laptop: Alienware M14x R2
Processor: intel i-7 @2.30 ghz
16 gb RAM
Graphics: Nvidia GeForce 650M 2GB
running on Windows 7 64-bit
after the restore i downloaded the latest drivers for my graphics card, so that shouldnt be the issue, i also switched the processing tu GPU only.
i already tried lots of solutions i saw on other posts, but none seems to suit my need, i tried the .NET framework thing, switching off the windows Aero theme, but the problem remains the same, it still freezes completely my laptop everytime i try to run Autocad 2014, i even tried installing Autocad 2013, Autocad 2011 and Revit 2014 but the issue is the same in all of them they freeze at startup without any pop up error warnings, just freezes.
As soon as I start up AutoCAD 2013 or 2012 64-bit, it loads all the way through and I get an error message:
FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 0h
I have uninstalled and reinstalled AutoCAD multiple times, followed the clean install instructions.
I have run as administrator, run in compatability for XP and 7, run with the onboard graphics, run with my nVidia card, and have had no results. Boot in Safe Mode, no changes. Disabled my Antivirus when installing, and when running, no difference. Installed SP1, no difference.
I cloned my 500G laptop hard drive onto a 1TB. Now, AutoCAD 2014LT starts opening but then disappears with no message. How can I get things working again?
View 7 Replies View RelatedI have been using the Tube and Pipe tool on a daily basis for a few months running Inventor 2010. I recently installed Inventor Pro 2014 and it no longer works. As I click on the Tube and Pipe button, the Windows loading icon thing shows up and runs in circles until I manually stop it by closing Inventor thru the Task manager (printscreen attached). I tried this with a very light Assembly containing only 2 parts that I need to connect.
Inventor Pro 2014 64 bits / Build 170 / Release 2014 RTM
Windows 7 SP1
Intel Xeon CPU E5-1620 @ 3.60 GHz
8 GB RAM
Nvidia Quadro 4000
i moved some files around in my "Documents" folder in win 8 , the next day when I restarted my laptop I got two errors about AAM Updates, so I looked into the folders that I moved around & see that a folder labeled "Adobe" that was usually in my documents folder was in the new folder where is was moving things to, so I moved it back to my documents folder.
I tried to open Photoshop & it didn't open, didn't even come up with a error, so I assume that I should check my running processes to see if maybe it is just hanging but it wasn't even running so I figure next things to dod is check my event log to see what kind of error it is leaving there. So I am left to think that I messed something up by accidentally moving that "Adobe" folder, I was wondering two things...Is there another folder that is placed in windows "Documents" folder besides the adobe folder that I may have not noticed that got moved, can someone verify what folders get placed in "Documents" folder upon installing Photoshop & other Adobe apps & second can I just repair my Photoshop install instead of uninstalling & reinstalling?
Also it my event viewer error log it is saying something about MSVCR100.dll...maybe that is what is crashing.
I have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
I have installed Photoshop CS5 on a coupel of comupters(XP) and I get following error when I start it. The user are useing mandatory porfiles NTUSER.MAN.
AppName:photoshop.exe AppVer: 12.0.1.0 ModName:scriptingsupport.8li
ModVer:10.0.0.0 Offset:000d183a
I had installed Corel Videostudio pro X5 on my laptop which has 64 bit WIN 8 and was working fine . Dues to system error which had nothing to do with the VS X5 , I had to reinstall Videostudio X5. Now it is crashing upon restart with some error that has to do with Changing the Environment (this error stays on for lass than one s second and closes itself so I cannot read complete error message)
View 1 Replies View RelatedI downloaded Adobe Photoshop CS6 (Trial) and installed it. When I wanted to start it, it crashed immediately. Is my computer not good enough for Adobe Photoshop CS6? Because CS5 works fine on my PC...Here are some information about my PC
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.120504-1619)
Language: German (Regional Setting: German)
System Manufacturer: NVIDIA
System Model: AWRDACPI
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon(tm) XP, MMX, 3DNow, ~1.2GHz
Memory: 1024MB RAM
Page File: 759MB used, 4261MB available
Windows Dir: C:WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
ACA & MEP won't srart. They both load all the modules, but then it just says loading and hangs there. If I push the Escape key then both will load. Scratching head??? I've done a repaire and a reinstall on both, but to no avail. BTW, they both did work, untill a couple a days ago. Uninstall then reinstall??
View 1 Replies View RelatedI need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies View RelatedOPEN and then try to browse to another folder and ACA crashes.It first started just when trying to SAVEIMG to save a just rendered to screen image. It would crash consistently when trying to change folders. Did a reinstall and it went away.Came back again and Now it's happening on OPEN as well. Every time. Have to drag files to ACA and save to which ever folder opens and then move it afterwards.I gather that ACA is using the windows folder system and there may be a clash there somewhere. I use AVG antivirus and I guess it's possible it is doing something like checking folders and causing problems.It has caused the browsers (IE and Chrome) to crash.Added an ignore acad.exe and whole folder to AVG but it still crashes.
Win7 sp1 64bit, 16gb RAM Core7 i7-2600 @ 3400ghz
I changed the 'startup' value from 1 to 2 in ACA 2012, now program crashes. On start up it displays the first error message 3 times (see attached), then opens a blank drawing. Once a select a file it displays the second message 70 times then opens the drawing. After a few seconds a fatal error message is displayed and program closes.
Error messages are the same other than address location changes.
I have tried a repair and a reinstall to no avail.
I was using the 'Isolate Objects in Plan' on my Model when I experienced a fatal error, and my system went down. So I went to my latest Autosave and opened it back up, only lost 5 minutes at the most. No, big deal, right?
But now I have objects missing, and when I go to save it says...
..."Save command is not allowed when edit in view session is active"...
It must still be in Edit in view, the only problem is that the small dialog box which takes me out of edit in view is missing. So, how am I supposed to exit this session? I have nothing active in the ribbon, nothing in the tabs a the bottom of the screen.
So I have this issue where opening the compact material editor a second time causes 3ds max design to totally crash. I cant figure out why it is doing that. I have tried reinstalling the software, even tried re-dowloading it and nothing works, have all the service packs and so on. Funny thing is that it works when using the slate editor. I can recreate the bug every time. Just open 3ds max design 2014 x64. Press material editor (assuming its in comact mode), close the editor and then open it again. Immediatly the program will crash to desktop, telling me that the progam has stopped responding.
View 1 Replies View RelatedIt seems that after I start customizing by adding Trusted locations etc with add-on programs, my start up looks like this...
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
And then opens normally.
I am currently running Building Design Suite Standard 2014. I have always used several of the tools on the express menu. Convert to mtext, arc aligned text, are 2 of the tools that are not working for me at this point.
View 9 Replies View RelatedI created a fire extinguiser block containing a mask style. We have multiple wall styles and want to put this block in the walls and have it hide the hatching within the walls. Do I need to use AEC Masking? Why isn't it masking the hatching? Using Architecture 2014.
View 1 Replies View RelatedWhen Autocad is started, it appears to be in a maximized window (it covers the entire screen and the windows maximize icon in the upper right corner shows maximized, but if I click on the top of the screen I can still drag the location of the Autocad window as though it was not maximized. Clicking the windows button to show in a window reduces the Autocad window as it should and re-clicking to maximize APPEARS to maximize Autocad, but it can still be dragged from the top of the screen.
This is not a windows problem, because all of my other programs (internet explorer, MS word, etc.) will maximize as they should.
I am running windows 7, 64 bit and Autocad 2014.
I have a 3 node Structural Member created that works... Now the next questions... Can you anchor columns at 3 column grid intersections... then draw this 3 node Structural Beam such that it will anchor also... so that... if you adjust the column grid... the columns and the 3 node structural member will adjust accordingly?
View 1 Replies View RelatedHow can I do a Structural Member Style with 3 nodes along it's length... a start, mid, and end nodes?
View 2 Replies View Relatedhow to get the annotative scale to work with schedule tags.When I use attributes in blocks I draw the attribute definition with a height that I wish it to display in PaperSpace. Then when defining the block I select the annotative scale so that the block and text display correctly in any viewport.
However when I create Scheduling Tags using the Create Tags button on the Annotate/Scheduling tab it shrinks the text by 1/8" as soon as the tag is created. I've made sure that the scales are set to 1:1 when I create it. I guess I can just enlarge the text 8 times before I make the Tag.
I have a file with several Space Styles. As I progress on the drawings I would like to modify some of the display properties, primarily color of the fill. I would think I could set the overall appearance of each Space Style in one location and then adjust elements of various display representations. In my case have a red hatch for a space style but in one display rep it would be solid and in another it would be a diagonal hatch.
As I see it, if I wish to modify the color I have to go into each display rep and adjust the color of the base hatch and click on the Style Override check box. It seems like duplicative work. Is there another method of setting the color of each Space Style so that it shows the same in all display reps?
I have just downloaded AutoCAD Architecture 2014 and am finding the materials editor difficult as I am used to using the 2010 materials editor. Is there a way of changing the editor back to 2010 or is there a basic tutorial available on how to use the 2014 material editor?
View 1 Replies View RelatedI am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.