AutoCAD Architecture :: Edit In View Crash
Dec 10, 2010
I was using the 'Isolate Objects in Plan' on my Model when I experienced a fatal error, and my system went down. So I went to my latest Autosave and opened it back up, only lost 5 minutes at the most. No, big deal, right?
But now I have objects missing, and when I go to save it says...
..."Save command is not allowed when edit in view session is active"...
It must still be in Edit in view, the only problem is that the small dialog box which takes me out of edit in view is missing. So, how am I supposed to exit this session? I have nothing active in the ribbon, nothing in the tabs a the bottom of the screen.
View 3 Replies
ADVERTISEMENT
Dec 2, 2013
This crashing of ACA 2014 on start-up is getting old.
A few times we thought we had it fixed only to have it return with a vengeance.
Seems to crash after loading Project Navigator files. Error log attached.
View 5 Replies
View Related
May 22, 2013
I need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies
View Related
Apr 2, 2012
OPEN and then try to browse to another folder and ACA crashes.It first started just when trying to SAVEIMG to save a just rendered to screen image. It would crash consistently when trying to change folders. Did a reinstall and it went away.Came back again and Now it's happening on OPEN as well. Every time. Have to drag files to ACA and save to which ever folder opens and then move it afterwards.I gather that ACA is using the windows folder system and there may be a clash there somewhere. I use AVG antivirus and I guess it's possible it is doing something like checking folders and causing problems.It has caused the browsers (IE and Chrome) to crash.Added an ignore acad.exe and whole folder to AVG but it still crashes.
Win7 sp1 64bit, 16gb RAM Core7 i7-2600 @ 3400ghz
View 4 Replies
View Related
Mar 18, 2013
I changed the 'startup' value from 1 to 2 in ACA 2012, now program crashes. On start up it displays the first error message 3 times (see attached), then opens a blank drawing. Once a select a file it displays the second message 70 times then opens the drawing. After a few seconds a fatal error message is displayed and program closes.
Error messages are the same other than address location changes.
I have tried a repair and a reinstall to no avail.
View 2 Replies
View Related
Sep 21, 2011
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
View 2 Replies
View Related
Mar 26, 2012
i draw up all of my walls, i connect them properly, cleanup etc. then i want to trim them with my roof slabs and what i see? i see my walls suddenly dissappear in 3d view but are still correctly shown on plan view? i know it has something to do with roofline because when i tried to project them automatically to ontu my roof slabs the walls dissappeared too!
View 1 Replies
View Related
Aug 11, 2012
How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
View 2 Replies
View Related
Jun 27, 2012
When a user closes ACA 2012 (sp2)he gets an empty crash message.
We are running win7 64bit.
View 2 Replies
View Related
Oct 19, 2011
I have a main assembly with two major subassemblies with one of them I want the representations to be set as Defualt instead of master but when I do this and change the size of my parts Inventor crashes, if I leave it set to master it works fine but parts with visibility turned off still show in the iam and dwg files. If I try to change the representation after changing dimensions Inventor also crashes. I can individually open the sub assemblies and everything works fine.
View 1 Replies
View Related
Jul 9, 2012
Every now and then I'll have a sheet that will not accept placement of another model view from the sheet set manager. (There are usually two or more model views already on the layout). Every attempt will cause AutoCAD to crash. I run recover and audit and the problem persists.
Today I did something differently. I added a new layout, and successfully placed the model view on that layout (I accepted the condition that the layout was not part of a sheet set). Then I went back to the layout I really wanted the model view on and was able to place it without any problem. The significant difference I can see is that I usually have only one layout (I typically delete layouts I don't use which leaves only one layout). It seems to me that having one layout and only one layout while attempting to place a model view on it could very well be the cause of this random crash problem. I have not been able to confirm this yet but the next time I crash trying to place a model view, the first thing I will try is to add a new layout.
---------------------------------------------Signature--------------------------------------------
Civil Design Professional Since 1983 (Intergraph), AutoCAD since 1989
It is said that a fool's voice is known by multitude of words... I'm just writing this stuff instead of saying it outloud... that's my loophole.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 1 Replies
View Related
Apr 16, 2013
hitting the "edit named selection set" button or selecting it via the menu option instantly crashes my max to desktop. I've tried switching UI's and changing display driver away from nitrous... so far no luck
even tried a repair, next option would be a complete reinstall
View 9 Replies
View Related
Nov 8, 2012
max always crashes, when i start creating a target camera in one of the 2d-views. In perspective everything is ok.
View 1 Replies
View Related
Nov 11, 2011
New to AutoCAD. Designing a building in plan. Then used the plan to draw a section in new layer, but still in plan view. Is there a way to copy that section onto a new layer in front view and erase the old section layer? .
View 1 Replies
View Related
Aug 24, 2012
How to use wildcards to aid in replacing text. i have a series of drawings with a few hundred door tags that I need to add an alpha character to the end. I'm on ACA 2008.
example - change door number 1200 to 1200A, 1203 to 1203A, etc.
View 2 Replies
View Related
Feb 25, 2010
Is there a way to add/remove vertices from polylines using the grips method similar to editing hatch boundaries? I know of "Pedit" and "edit vertex" then "add vertex" but this seems like too many steps after working with hatch boundaries.
View 2 Replies
View Related
Dec 12, 2011
When I try edit block in place this error occurred:
Errors found in references to other objects:
Object reference missing: AcDbXrecord, to AcDbBlockTableRecord
Cancel
View 2 Replies
View Related
Nov 14, 2013
ACA 2011
So, I extract elevations from my model. No prob. Works perfectly. I then often edit linework to change some linework colors...works fine. However, What if I want to change/edit a Hatch? When I click on 'Edit Linework', the hatch automatically turns off to allow me to edit the linework... Can one edit the Hatching?
View 4 Replies
View Related
Nov 7, 2011
Is there any easy way to globally edit lineweights of certain components? Several of the components look fantastic at one scale and terrible at another. Some we just need to lighten but I cannot find where to edit them. I can always (of course) edit the block once it is inserted or edit layers in each drawing but would prefer a more permanent solution.
View 1 Replies
View Related
Mar 15, 2012
I created my own tools of own content on my own pallets and then found . you can drag a whole tab into the browser to quickly archive your tools. Having reinstalled I have 'dropped the collections back to ACA12 and all my tools restored.
However I can no longer edit or add to these tool pallets. I cannot edit any properties within tools either. There is no lock symbol on the pallet that I can see, only a refresh symbol.
The .atc file they reference (found from the Content Browser location they came from) is not set to read only. Permissions seem to be set to allow read, modify, write etc. I first used the 'My Tool Catalog' provided but also copied it all back to a new catalog but it's still locked.
View 2 Replies
View Related
Nov 18, 2013
I am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.
View 3 Replies
View Related
May 10, 2012
I'm getting very long run times to edit x refs in place. Once the exref drawing opens, sometimes after 2 or three minutes, and I make my edit, It can take ten minuted to close the xref.
Drawing are clean, purged, -purged, recovered audited. Computer is new workstation and dedicated to CAD only. Very little opportunity for corrupted files.
View 3 Replies
View Related
Sep 13, 2013
in 2000 I was able to discover a command that allowed you to renumber a large selection of blocks in order. I have been searching for that command again every time I need to renumber a floor plan due to the addition of new spaces. What this command was and if it is still available in 2010? It would save a ton of time!
View 2 Replies
View Related
Aug 14, 2013
The way it looks I should be able to edit the propertyset data though an XRef... but all the properties are grayed out. I thought it was because I also had the XRef open... so I closed it. Still the same result.
The discription says "Edit property set data in the current drawing or through external references. Add or Remove property sets."
Am I not understanding the tool - or what?
View 1 Replies
View Related
Oct 2, 2012
We have an intern that has somehow made it impossible for her to edit inside viewports(switching to model space) on her layouts. None of us has seen this before and do not know how to reverse what she has done. This happens with any drawing she opens. She can edit when in the model space tab, but when she goes to one of the layout tabs and double clicks on the viewport she cannot edit. The viewports are not locked.
We have had several people look at it and cannot find what command or setting she changed. She does not have admin rights so I do not think she could have run a script. She is not familiar with AutoCAD Architecture, her experience has been limited to Revit.
View 5 Replies
View Related
Mar 1, 2012
For some reason I can't edit the "Position Z" when I created a 3D object via extrusion. How can I do this?
View 2 Replies
View Related
Aug 7, 2011
I am having trouble trying to edit the title fonts in a door schedule. No matter which font I pick under "Edit Schedule Table Style" after a selection of the schedule and right clik, the title font will not change. The listed doors font does change. Is it not poosible to change the title and descriptor font?
View 1 Replies
View Related
Apr 3, 2013
I am working on drawing a simple garage with a few windows throughout it. After inserting the windows in the wall where I want them, I cannot see them from the top view. If I switch to an isometric view they are visible and exactly where I want them. what I may do to make these visible from the top view?
View 1 Replies
View Related
Jan 26, 2012
I created a 3D view, shaded Realistic and inserted it into a sheet that is 11x17. When I plot (whether to .PDF or our copy machine) after the plot dialog box disappears, another one pops up that says "Plot Progress: Attempting to Cancel Sheet". Then it prints everything in Paper Space, but the viewport doesn't plot. By the way, when I look at it in Plot Preview, it's perfect. Fortunately I don't need to give this to my client for another 10 minutes.
View 1 Replies
View Related
Jan 8, 2014
I got a 3D model from a building but somehow it is not solid, you can "see trough the walls" (as in image attached). I want to create a plan view for each floor and a side view from this 3d model.
View 1 Replies
View Related
Jun 5, 2012
In a drawing, How is one able to edit a view after it has been created? For instance the parent view orientation is locked, the child views are locked with respect to everything except the identifier.
View 4 Replies
View Related
