AutoCAD Architecture :: 2014 - No Canvas Selected?
May 6, 2013
It seems that after I start customizing by adding Trusted locations etc with add-on programs, my start up looks like this...
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
No canvas exists. Please click New Canvas.
And then opens normally.
View 1 Replies
ADVERTISEMENT
Oct 4, 2013
I want to be able to have All Work Planes set as 'Invisible' but create a Message.box or Icon that allows me to change the Visibility of any individual workplane(s) physically selected in the browser.
A rule written by another member should do the trick if the following line could be altered so as not to read 'For Each' oWorkPlane but instead for 'Each Selected' oWorkplane.
'For Each oWorkPlane In docFile.ComponentDefinition.WorkPlanes'
'get user input
oInput = InputRadioBox("Select workplane visibility:", _
"Turn ON workplanes for all components", "Turn OFF workplanes for all components", "False", "iLogic")
'Define the open document (top level assembly)
Dim openDoc As Document
openDoc = ThisDoc.Document
[code]....
View 1 Replies
View Related
May 31, 2012
Where there's an active selection over the entire canvas you are unable to Contract your slection.
Doesn't matter how you select the whole canvas - whether a Select > All, or simply by dragging over everything.
This has been an issue in PS since I can remember. Not sure if CS6 retains the issue. I'm guessing YES.
View 4 Replies
View Related
Feb 18, 2014
In 3dsMax 2014 I have noticed that when you select an object it will display it's wireframe. You use to be able to cycle through the F3 and F4 combinations to show/hide this wireframe however it does not appear to work in 3dsMax 2014.
Is there another way (besides the F3 + F4 hotkeys) to disable this wireframe on the selected object?
Software: Autodesk 3dsMax 2014 - Service Pack 3 (64-Bit)
View 2 Replies
View Related
Jun 26, 2013
Ok so in previous version if you have an object selected, and hit F4, ( to urn on and off Wireframe display). you could have and object selected, without wireframe showing, or showing if you prefer.
This option seems to have been removed, or moved in 2014.
View 6 Replies
View Related
Dec 2, 2013
This crashing of ACA 2014 on start-up is getting old.
A few times we thought we had it fixed only to have it return with a vengeance.
Seems to crash after loading Project Navigator files. Error log attached.
View 5 Replies
View Related
Aug 26, 2013
I am currently running Building Design Suite Standard 2014. I have always used several of the tools on the express menu. Convert to mtext, arc aligned text, are 2 of the tools that are not working for me at this point.
View 9 Replies
View Related
Dec 17, 2013
I created a fire extinguiser block containing a mask style. We have multiple wall styles and want to put this block in the walls and have it hide the hatching within the walls. Do I need to use AEC Masking? Why isn't it masking the hatching? Using Architecture 2014.
View 1 Replies
View Related
Oct 16, 2013
When Autocad is started, it appears to be in a maximized window (it covers the entire screen and the windows maximize icon in the upper right corner shows maximized, but if I click on the top of the screen I can still drag the location of the Autocad window as though it was not maximized. Clicking the windows button to show in a window reduces the Autocad window as it should and re-clicking to maximize APPEARS to maximize Autocad, but it can still be dragged from the top of the screen.
This is not a windows problem, because all of my other programs (internet explorer, MS word, etc.) will maximize as they should.
I am running windows 7, 64 bit and Autocad 2014.
View 4 Replies
View Related
Oct 1, 2013
how to get the annotative scale to work with schedule tags.When I use attributes in blocks I draw the attribute definition with a height that I wish it to display in PaperSpace. Then when defining the block I select the annotative scale so that the block and text display correctly in any viewport.
However when I create Scheduling Tags using the Create Tags button on the Annotate/Scheduling tab it shrinks the text by 1/8" as soon as the tag is created. I've made sure that the scales are set to 1:1 when I create it. I guess I can just enlarge the text 8 times before I make the Tag.
View 4 Replies
View Related
Sep 30, 2013
I have a file with several Space Styles. As I progress on the drawings I would like to modify some of the display properties, primarily color of the fill. I would think I could set the overall appearance of each Space Style in one location and then adjust elements of various display representations. In my case have a red hatch for a space style but in one display rep it would be solid and in another it would be a diagonal hatch.
As I see it, if I wish to modify the color I have to go into each display rep and adjust the color of the base hatch and click on the Style Override check box. It seems like duplicative work. Is there another method of setting the color of each Space Style so that it shows the same in all display reps?
View 2 Replies
View Related
Jul 23, 2013
I have just downloaded AutoCAD Architecture 2014 and am finding the materials editor difficult as I am used to using the 2010 materials editor. Is there a way of changing the editor back to 2010 or is there a basic tutorial available on how to use the 2014 material editor?
View 1 Replies
View Related
Nov 18, 2013
I am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.
View 3 Replies
View Related
Jul 11, 2013
Autocad Architecture 2014
My content browser is being finicky. The palettes are there, I can select the I-drop but when I release the dropper in my file, nothing happens, no error, no content???
Is it possible to unload and reload just the content browser?
View 5 Replies
View Related
Jun 19, 2013
I'm new to the architecture package, but not AutoCAD. I just got training and this has stumped my instructor and me. We use half doors in our buildings and can't figure out how to design one. The door and frame that will finish @ 42" AFF.
View 3 Replies
View Related
Jul 8, 2013
When I try to attach a 2013 Excel file into a 2014 drawing I get a message 'You have selected an unsupported DGN File. Only V7 and V8 files are supported.' Cannot attache through the Import command either. I know in past versions you could insert the file and any changes made to the file appeared to the attachment in the drawing.
Is this no longer possible? Surely not, it is way to handy. What am I overlooking to make this happen?
View 1 Replies
View Related
Aug 28, 2013
Doesn't CUIx mean Custom User Interface?
Background: Using a new release of 2014 out of the box. Made some changes to the .PGP file, created a custom palette and dragged some tools and gave them some standardized styles. Worked fine all day.
Problem: The next morning I booted up ACA and the menu ribbon failed to load. At the command prompts suggestion I tried CUILOAD. Got the dialog box, found the ACA.CUIX file, but despite pressing the LOAD button nothing happened.
Fix: I looked into the folder where the ACA.CUIX file was located (first folder on the support path), noticed there was a ACA.bak.CUIX file in the same folder. I renamed the ACA.CUIX file and then took the .bak "extension" off of the other file. Everything loads fine... except no customization.
Odd note: Last night, after I closed all my applications I went to shut down my computer and got Windows 7 version of the Blue Screen of Death. I immediately rebooted and all looked OK, but I did not start ACA. Not sure if related but just thought I mention it.
Request: Is there a special step that I missed when creating a custom palette that caused it not to reload?
I tried attaching the offending .CUIx file but the forum rejected it by stating "The contents of the attachment doesn't match its file type."
View 3 Replies
View Related
May 14, 2013
The Look In: Drop down for Open drawing locks ACA 2014 up. I have to end task and reopen ACA to work.
2014 and Windows 8?
View 2 Replies
View Related
Aug 29, 2013
We experienced a problem. we have a drawing file, is about 1.6meg not big. while working in model space doing some 3D work, all of a sudden all the objects dissapear except for some text. all layers are on and thawed. we regen all, zoom all. weird thing is when we go into the paper space tabs everything shows up. so all the data is there some place but cant find it in model space.
there are no xrefs in the drawings and i had cleaned all the multiple copies out before to keep the file size down and more workable. this is happening on two machines. other drawings are fine.
View 2 Replies
View Related
Jun 10, 2013
I have a client who has a customized workstation in 2012 and is trying to move to 2014. We have gotten most of it done but theyaretryingtoloadacustomlipsroutineanditkeepsfailing.
Image attached.
View 4 Replies
View Related
Nov 22, 2013
when creating a schedule with a simple formula column (e.g : [QUANTITY]*Width), the formula column total doesn't add the formula results for a grand total. The total shown is the addition of Width of element.
If I try and enable "Apply formula to totals", the total is : total quantity*total width instead of just a simple addition of formula resulting values.
For example:
I have 4 windows of 2 different styles.Two windows have a width of 2 meters, the other 2 windows have a width of 3 meters. I want to find out, my total window width, of all window styles.Therefore, i make a schedule with the following columns: QUANTITY, WIDTH and TOTAL WIDTH. The total width column is a formula column (Quantity*Width). The total of the formula column (Quantity*Width) doesn't add the resulting values (2*2+3*2=10), it only adds the simple widths without multiplication with quantity, my result is 5, wich is incorect. If i enable "Apply formula to totals", it multiplies total quantity (4) by total width (5).
I need a solution for having the corect total on the formula column.
View 3 Replies
View Related
Oct 2, 2013
I used to have a third party plugin that had a "clone" command.
It was like "Add Selcted" & keep matching the properies for more new objects. So new objects would match the layer, linetype, etc.of what was previosly selected Not just the once.
Is there a command like this in ACA 2012 ?
View 9 Replies
View Related
Feb 6, 2012
When using the design pallette tool bar, my objects will not insert into the selected surface? Reasons Why?
View 2 Replies
View Related
Jun 6, 2013
I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
View 2 Replies
View Related
Aug 3, 2013
Autocad architecture 2014 64bit displays conceptual views as wire frame for walls when displayed in 3D
View 9 Replies
View Related
Jun 13, 2013
My problem is similar to the "send behind"/"bring to front" commands that you use when you're drawing. But my issue is this: what wastes a lot of time for me in the new program is when I try to work in multiple windows at once. (Btw, we don't have large screens to work with here.) Usually what I'll do is have, say, three or four windows up at a time, none of which are maximized, and usually have two that I'm working on side by side, with the remaining one or two sitting in the background. I also keep a lot of windows active, and minimized, so that's not the answer I'm trying to find. I work mostly in model space if that makes any difference, though I don't think it should.
Now, not only do the borders of each of my windows get all sorts of funky screen images on them when I move them around (mildly amusing but not annoying), but what really grinds my gears is that the orientation, or layering, or what-have-you, of the windows that I have active and open in the background is not retained. Let's say I have X-1 and A-1 up front and center, and I have A-3 and A-4 in the background. Let's say I had moved A-3 to sit on top of A-4 before I started working on the X-1 and A-1 sheets. Now, in the 2013 version, if I'd slide X-1 or A-1 out of the way, I'd see A-3 sitting right there on top, all happy and pretty where I left it.
View 1 Replies
View Related
May 12, 2013
Autocad architecture 2014 64bit displays conceptual views as wire frame when displayed in 3D;
View 9 Replies
View Related
May 5, 2011
how do i use the stair tower generator, when i click i just get a message that says "no current project selected"
View 1 Replies
View Related
Aug 13, 2013
Just starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
View 5 Replies
View Related
Apr 28, 2013
How to save a file as a PDF in Revit Architecture 2014? I have tried going to print and then just save as a PDF, but there is not a PDF option.
View 3 Replies
View Related
Aug 13, 2013
It's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
View 2 Replies
View Related
