I had installed Corel Videostudio pro X5 on my laptop which has 64 bit WIN 8 and was working fine . Dues to system error which had nothing to do with the VS X5 , I had to reinstall Videostudio X5. Now it is crashing upon restart with some error that has to do with Changing the Environment (this error stays on for lass than one s second and closes itself so I cannot read complete error message)
View 1 RepliesWhen I open the program the start up loading image come up then an error box saying that an unspecified error has occur and I should contact customer support. What devices are involved and their mode of connection?: No devices really just trying to open the program on my laptop The Version of program is being used: x4 list all patches/updates that have been installed relating to that version of the program.: I just installed the 2nd patch after this started happening hoping it would fix it, I tried to install the first one but it didn't work. Details of the source files.: Not sure what this means? I don't really think it applies since its before I can even open projects
I use a windows 7 notebook, 4 gig of ram. This problem just popped up tonight, I am still able to open x3 on my computer though. When I did some lookin at the event logs, its showing that the problem file is the psiclient?
I have the VS X3 version and am trying to capture a VHS tape to VS. I'm using the ION "Video 2 PC" capture card and I have hooked up the 3 RCA cables (red, white and yellow) to the capture card and then via a USB port attached the capture card to the computer. The USB device is recognized in Source by VS X3 and is called "USB 2861". The Format automatically is automatically set to "DVD". The capture video icon is blinking and when I click it to capture, I get the error message "cannot start the capture graph". I can't go any further from this point. what I should do or check or what this error message means?
View 1 Replies View RelatedI'm running Pro X5 (trial version). I am getting this same error. I tried to follow the recommendations at [URL], but I still get the same error within a couple seconds after clicking "Burn", right after the DVD drive spins up. Note that my media is Memorex DVD+R Lightscribe 16x. I tried selecting both "Maximum" speed and 8x. Same problem in both cases. FYI, my laptop hard drive is a SSD. I want to be sure this application works completely before purchasing it. The file I"m trying to create is only 10 minutes long and 426MB.
View 1 Replies View Relatedi moved some files around in my "Documents" folder in win 8 , the next day when I restarted my laptop I got two errors about AAM Updates, so I looked into the folders that I moved around & see that a folder labeled "Adobe" that was usually in my documents folder was in the new folder where is was moving things to, so I moved it back to my documents folder.
I tried to open Photoshop & it didn't open, didn't even come up with a error, so I assume that I should check my running processes to see if maybe it is just hanging but it wasn't even running so I figure next things to dod is check my event log to see what kind of error it is leaving there. So I am left to think that I messed something up by accidentally moving that "Adobe" folder, I was wondering two things...Is there another folder that is placed in windows "Documents" folder besides the adobe folder that I may have not noticed that got moved, can someone verify what folders get placed in "Documents" folder upon installing Photoshop & other Adobe apps & second can I just repair my Photoshop install instead of uninstalling & reinstalling?
Â
Also it my event viewer error log it is saying something about MSVCR100.dll...maybe that is what is crashing.
I have installed Photoshop CS5 on a coupel of comupters(XP) and I get following error when I start it. The user are useing mandatory porfiles NTUSER.MAN.
Â
 AppName:photoshop.exe    AppVer: 12.0.1.0 ModName:scriptingsupport.8li
ModVer:10.0.0.0Â Â Â Â Offset:000d183a
I downloaded Adobe Photoshop CS6 (Trial) and installed it. When I wanted to start it, it crashed immediately. Is my computer not good enough for Adobe Photoshop CS6? Because CS5 works fine on my PC...Here are some information about my PC
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.120504-1619)
 Language: German (Regional Setting: German)
System Manufacturer: NVIDIA
System Model: AWRDACPI
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon(tm) XP, MMX, 3DNow, ~1.2GHz
Memory: 1024MB RAM
Page File: 759MB used, 4261MB available
Windows Dir: C:WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
This crashing of ACA 2014 on start-up is getting old.
A few times we thought we had it fixed only to have it return with a vengeance.
Seems to crash after loading Project Navigator files. Error log attached.
As soon as I start up AutoCAD 2013 or 2012 64-bit, it loads all the way through and I get an error message:
FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 0h
I have uninstalled and  reinstalled AutoCAD multiple times, followed the clean install instructions.
I have run as administrator, run in compatability for XP and 7, run with the onboard graphics, run with my nVidia card, and have had no results. Boot in Safe Mode, no changes. Disabled my Antivirus when installing, and when running, no difference. Installed SP1, no difference.
Whenever I launch 3dsMax 2012, it crashes without any kind of error message, apart from the Windows one that gives no details at all.The launcher goes up to the "Starting 3ds Max" step and then stops.I tried to desinstall/reinstall, different languages (I'm French but I'd rather use the English version). I also deleted the .ini just so the program could recreate one but it did nothing.
In fact it worked once or twice, I could launch & use it normaly, but then it stopped working..I'm using Windows 7 64bits SP1 on an Intel i5 2410M, GeForce GT550M, all my drivers seem to be updated, etc.
I am running Photoshop CS3 extended on a Mac. Working fine last night. Today every time I try to open something (FILE, OPEN) the program crashes with an error - 600 message. Any ideas?
View 1 Replies View Relatedcannot start photoshop error 213.5
View 1 Replies View RelatedI cannot get photoshop to start. I get error 148:3. I have restarted my computer & still get the error.
View 1 Replies View RelatedThe other day I had a computer crash now I can't see Photoshop CS6 application icon or upgrade it on my Creative Cloude. It looks like it does uphrade only to at the end come up with an error U44M2P7.
View 4 Replies View RelatedI keep getting error code 150:30 when I try to start Photoshop. I have system 10.8.4 and am running photoshop cs4.
View 1 Replies View RelatedI just got an HP pavilion d7 computer running Vista Home Premium (64) on a 2gb processor with 4gb RAM. I successfully installed CS3, entered the license code and activated the software, but when I try to run Photoshop CS3, I get the infamous Adobe Photoshop CS3 has stopped working properly error at the screen where it says it is building TWAIN menu items. I've tried the licensing update from Adobe with no success. I've tried running it as administrator, using the compatibility mode...no success. I'm at my wits end. Incidentally, I tried installing the PSE7 trial (because I was going to buy it next week) and that gives me the same error whenever I try to access the Editor.
View 9 Replies View RelatedEach time I start CS4 I get an error message "Could not load the Adjusted Refresh module because it does not work with this version of Photoshop". There is no option not to show the message in future, and I cannot find where to disable the module.
I am running a CS4 upgrade from CS.
LIghtroom 3.6 won't start and get the following error message "Lightroom - Opening Catalog: untitled (27 0f 42).jpg.lrcat."
Â
I have uninstalled Lightroom and re-installed and still get the same error.
I was using CS5.1 for a while with no problems. Everything went well until one day it gave me an error on hardware acceleration. All it did was give me a scrubby zoom. I spent a few days researching it and eventually gave up on finding a solution.
Â
So I thought I'd try out CS6, to see if it fixed anything. It doesn't. It's worse, even. It crashes randomly at various actions (like switching tools, changing layers, saving), and it crashes without fail if I use liquefy or transform a layer and then try to duplicate it (I'm just trying to make a gif, darnit!) If I'm just drawing and erasing and using undo, it doesn't crash as much. Scrubby zoom is still a problem.
Â
My driver is up to date according to the HP website:Intel High-Definition (HD) Graphics Driver2010-12-03 , Version:8.15.10.2189, 78.05MIt's really old, but HP isn't updating it. I've tried uninstalling it and reinstalling it. Moot point.The driver is compatible with OpenGL.
Â
I also tried this driver, but apparently it's not compatible.
Â
Additional info/things I've tried: Processor: Intel Core i5 CPU M 450 @ 2.40GHZ 2.40 GHzRAM: 4GBSystem type: 64-bit No third-party plug-ins. 60% memory available to Photoshop. Photoshop is updated to the latest version.Windows is updated (I spent a freggin day trying to figure that out because updates were frozen, and then spent 3 hours trying to figure out why F8 wouldn't bring up advanced boot options so I can delete old update logs so I can update windows so I can get photoshop working--TO NO AVAIL) GPU support option is greyed out, so it's already turned off.
Â
When it crashes, all Windows says is "Adobe Photoshop CS6 has stopped working". Then the details afterwards note "files that describe the problem", which include...
Â
The C:UsersBaniAppDataLocalTempWER7781.tmp.WERInternalMetadata.xml file, which states:
Â
-<WERReportMetadata>-<OSVersionInformation><WindowsNTVersion>6.1<Build>7601 Service Pack 1<Product>(0x1): Windows 7 Ultimate<Edition>Ultimate<BuildString>7601.18113.amd64fre.win7sp1_gdr.130318-1533<Revision>1130<Flavor>Multiprocessor Free<Architecture>X64<LCID>1033</LCID>
-<ParentProcessInformation>
[Code]......
Â
The C:UsersBaniAppDataLocalTempWER9D1B.tp.appcompat.txt is on pastebin here: [URL]
Â
So I looked up other issues regarding "aticfx64.dll", and nothing works. My last options are either to downgrade again, or to upgrade my video card, but I don't know what kind of video card I need.
AutoCAD 2010 civil 3D.
Main issue is frequent crashes of the AutoCAD software. Sometimes 10-12 time's in a day. Unfortunately their are no error messages, and I have yet to see any pattern in when and how it crashes.
The problems I can see are the workspace, and process memory of my system. The workspace does not load correctly. The Ribbon shows multiples of the every tab at least twice. All tabs show the commands but not the pictures associated with the commands. CUIload shows correct workspaces.Â
Second note is that my system runs the same .dwg file's at 2/3 the processing memory than any other identical systems I run AutoCAD on.
Third, through my digging and attempted solutions I found that the AcSignCore_.dll file was missing.
I have: re-installed 3D twice, updated graphics drivers on my system and run open close save hotfix as well as AutoCAD2010 update 2 for 64 bit system.
When creating a PDF from a DWG AutoCAD LT 2010 (running on windows 7) I get the following error.
unhandled access violation reading 0x6a162be0 exception at 6a162be0h
This only happens the second time I create a PDF - the first time it is very quick and there are no errors
I have tried a repair and a reinstall but am still having the same issue.
Just installed Adobe Master CS6 on new installation of OSX Mountain Lion. Installation is ok but when i start Photoshop the color profile of monitor change (become more "cold").
View 3 Replies View RelatedJust got my Designer pro X CD in the mail, installed but Xara won't start I get an error message at start up." This application requires CPU support for SSE2 but this CPU dose not support it. "I am on Windows XP, AMD XP 2800, 2GB Ram.
View 9 Replies View RelatedWhen attempting to start Revit Architecture 2013 I get the error message "The application was unable to start correctly (0xc0000007b). Click OK to close the application".
Â
Revit Architecture 2013 has been installed on my computer since it's release in April and I have installed both updates. Until now it has worked fine and I have had no startup issues.
Â
AutoCAD Architecture 2013 also will not start- same error message.
Â
Oddly, Revit Architecture 2012 will start.
Â
I have tried to uninstall Revit Arch 2013 using windows control panel, but it does not respond.
Â
I have run Microsoft Security Essentials, Microsoft Malacious Software Removal Tool, Malwarebytes, and Super AntiSpyware. So far, the computer looks okay. The only thing questionable was the installation, and immediate uninstall of the iLivid download manager.
Just last week I was working just fine. When trying to access the product today, as usual the A5 sized "Loading" starts but when the product is to appear it just shuts off. It is not indicating what the error is through a dialog box, hence, I am not sure what the problem may be.
I have check various discussion groups which say it may arise from FLEX related files or CascadeInfo.cas but nothing changed. I have also done an entire un installation of the product and Installed it from scratch. The problem persists.
PC Specs:
Intel Core i7-720QM processor
Windows 7 Home Premium N 64-bit
16GB DDR3
1280GB HDD
I have a user with AutoCAD 2013 installed on his work laptop. It is a Dell with Windows 7 64-bit. We don't have local IT any more and he was having problems with the computer, which is only 6 months old, so he had to send it from Michigan to Massachusettes, where our Global IT resides.
They "Imaged" the hard drive, installed a new hard drive and put the "Image" on the new hard drive. and sent it back without making sure things worked.
Now when he starts AutoCAD 2013 (vanillia), the Splash screen comes up and then he gets a Fatal Error. I have attached a capture of the error.
When he first got it back there were no drivers installed for his nVidia Quadro 1000M card, so he could not use his 2nd monitor. He found the driver and installed it and now he can use the 2nd monitor, but still had the problem with AutoCAD.
I have a preview cache error on start up. This persists even on re-start and LR will not progress beyond this point. I have tried a repair and a re-install but no joy. I also did a clean of the PC after to clear any registry errors too. Still the same happening. Photoshop works fine.
View 3 Replies View RelatedLR encountered an error at start up when reading from it's preview cache.
View 8 Replies View Related I'm having with x3 when I import MOV files from an IPhone 4s onto an HP pavillion dv7 4270us laptop with 4 gb, 1.80ghz.
The playback is very choppy and almost paralyzed, while the audio does fine.Also, x3 constantly shuts down with a brief error message telling me to contact corel support.
Should I be converting these video clips before I import them into my capture folder on corel?
I'm trying to preserve quality since the iphone4s takes a pretty nice video, definitely rivals my canon dv and most HD flip cams I've seen.
It's an element contained in a .vsp. Right now I'm trying to "connect" & render 1 video file + 4 .vsp (inttertitle card.mp4, segment1.vsp, ... segment4.vsp). Each contains segments that run continuously and I need to combine into just one video file (mp4 HD format). But every time the render reaches that file (above) (17% of the total render), it crashes. There's nothing else on that timeline except that mp4 file and a wav file. I don't understand why it's happening. I have done it successfully before in Youtube HD format.
Smart Proxy is enabled, but I don't see how that's relevant to rendering. I have tried re-converting the video file into versions: one has .mpeg4 codec, the other has .H264. I also downloaded & installed VSPX4 SP1, updated my codecs, drivers, downgraded Quick time. But the result is still the same as far as rendering the whole project goes: crashing at 17%.
There were enough RAM & CPU when I did the rendering so I don't think this is a hardware issue. I also tried disabling Smart Render just to see if it will react positively.
There came a time also when the render passed 17%, but it crashed when it reached 94%. Interestingly, when I rendered segment1.vsp only (to mp4 HD), it also passed 17%, but then it failed to finish also. Right now, I'm going to re-convert the file to a different format to see if the whole crash is related to mp4 (I have rendered many mp4s just last week and they were successful).
So I'm curious, is there a limit to how many "connected" .vsp files one can render successfully? And is there a certain mp4 type that VSP can't handle properly?
I am trying to encode to BluRay a compilation of Canon 5D2 HD video plus some stills (shrunk to about 1000x800 pixels). This has the Canon audio track plus some background music from mp3 files. When I try to encode it runs for about an hour and then crashes. The problem report data says vstudio.exe has crashed with the fault module CoreAudioToolbox.dll. A bit of digging says CoreAudioToolbox may be to do with Quicktime so I have done a clean install of that but still have the same problem.
View 13 Replies View Related