Civil 3D 2013, SP1.
Set STARTUP to 2, and make sure the Sheet Set Manager palette is visible.
Close Civil 3D, then restart it.
It should open in a zero-document state, with the SSM palette visible.
Now open a sheet set, and double click on a sheet in the SSM to open it.
When I do this, I get four "Unhandled Exception" dialogs in a row, then C3D disappears (crashes!)
I changed the 'startup' value from 1 to 2 in ACA 2012, now program crashes. On start up it displays the first error message 3 times (see attached), then opens a blank drawing. Once a select a file it displays the second message 70 times then opens the drawing. After a few seconds a fatal error message is displayed and program closes.
Error messages are the same other than address location changes.
I have tried a repair and a reinstall to no avail.
I recently gave my windows a factory restore (fresh start windows original copy), I had no issues with autodesk software before the windows fresh start (i use Revit and 3Dmax too), i even installed and used Autocad 2014 on my laptop before the restore and it ran just fine, problem is now after the windows restore Autocad crashes everytime i open it, installation was smooth and succesfull with no error warninings whatsoever; the problem comes when i start Autocad 2014 for the first time, the initialization window opens and starts loading the files but then (everytime) crashes and freezes my laptop forever, not even the task manager is posible to open
My Specs:
Laptop: Alienware M14x R2
Processor: intel i-7 @2.30 ghz
16 gb RAM
Graphics: Nvidia GeForce 650M 2GB
running on Windows 7 64-bit
after the restore i downloaded the latest drivers for my graphics card, so that shouldnt be the issue, i also switched the processing tu GPU only.
i already tried lots of solutions i saw on other posts, but none seems to suit my need, i tried the .NET framework thing, switching off the windows Aero theme, but the problem remains the same, it still freezes completely my laptop everytime i try to run Autocad 2014, i even tried installing Autocad 2013, Autocad 2011 and Revit 2014 but the issue is the same in all of them they freeze at startup without any pop up error warnings, just freezes.
my tool palette causes a systematic crash at startup .
is there a way to launch without opening toolpalettes .?
Know it's old, but have been using Photoshop CS 8.0 on office Mac Pro and home iMac for years with no problems. OSX is 10.5.8 Leopard. Still works fine on Mac Pro, but has just started crashing at startup on iMac for no apparent reason. Graphic layout comes up and then shuts down. Reinstalled the application with same result.
View 1 Replies View RelatedI change my motherboard ans proc and memory yesterday, but i don't reinstall windows seven, and now i don't have time to reinstal windows now.Before change my motherboard, 3ds x64 worked good, and now he crash on startup with the report error on jpeg attachement.
3dsmax_minidump.dmp
dmpuserinfo.xml
dumpdata.zip
(and it's written version 3ds max 13 - 64bits)
But 3ds max 2011 x32 works very good I need 3ds max 2011 x64 for use the plugins hair farm.
I already reinstall a several times 3ds x64 but nothing, et try to remove the three dmp, xml, and zip, and also put on Open GL
windows 7 ultimate x64
intel i7 2600 3.4 ghz
8,00 gb ram
geforce 8800 gt
OS: vista 64bit (all latest updates)
nvidia 8800gts 512 (driver 180.48)
8 gb RAM + latest mobo bios
It was working totally fine then WHAM! I noticed it first when i minimized it to the taskbar to look for some other files on my desktop. now it suddenly doesn't want to start. the 'only' thing is that the pc went into hibernation while i was at lunch a few times this week (can't see that having an effect)
I start it up and it crashes +/- after 8 seconds. EVERY time.
- Tried using the "run as admin" = didn't work (tried it just in case)
- tried changing a few settings in nvidia control panel = nada!
- once i got it open within the 8 seconds, I turned off openGL completly = nada!
- I've used the "DisallowOpenGLWindows_OFF.reg" just in case and that doesn't work either. (its a pretty recent GFX card)
all other cs4 apps (master suite) are working fine!
this exact same thing happened just before i reinstalled vista x64 about a month ago.
It crashes before it even finished loading. I haven't even gotten the program to work once. Yes, I uninstalled and reinstalled. I have no printer, and I'm using Vista 64.
This is what it says.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 10.0.0.0
Application Timestamp: 4601eae8
Fault Module Name: dlbktwds.ds
Fault Module Version: 3.107.0.0
Fault Module Timestamp: 45df4d5a
Exception Code: c0000005
Exception Offset: 00004da2
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I get the following crash meassage on booting AE 12.1 from Mavericks
I have re-installed & trashed Prefs.
In a moment of lax attention I've done something stupid to the Photoshop CS version (original 1) and told it to search C:/programfiles for plugins whereas I meant to tell it specifically where to look.
So now it crashes when it gets to the 'Scanning for Plugins' part and of course I can't alter it back to what it should be.
Now when I run Image Ready the plugins are still as normal...
System Restore doesn't change the settings. Uninstall of the Photoshop component doesn't put it right either.
(maybe uninstall/reinstall the entire CS suite - but I guess even then it will still have the bad settings)
So is it a registry thing and if so what needs to be done to stop it searching the entire hard drive programs for plugins.
The company I work for has just switched to Max2012 but my machine has a problem with it. I get this error on startup and whenever I open and close the ribbon:
-- Unknown property: "validobjfunc" in #StructolyBoost(undefined:<data>;Public)
It throws open the max script editor window and a message prompt saying the above text. If I press OK, the message goes away. When I close the editor the message comes back and we have a loop!
To get around it I can press OK. Then run script and go to max root > stdplugs > stdscripts > PolyTools.ms
I looked around and saw people had this error on previous versions of max and the fix was to place a copy of polytools.ms in the startup folder. I tried this and polytools.ms crashes instead on startup. To me from the error given it looks like the ribbon isn't loading a script somewhere that it should do. Placing it in the startup folder makes sense as a temporary fix but in this case it doesn't work. I can run the script after every time max has loaded but this is inconvenient and means I can't do any batch operations which I do quite often.
My PC specs are Win XP x64 SP2, Xeon W3550, 12gb ram, quaddro 3800 and dual screen monitors, I also use a Wacom tablet.
The problem happens in both x64 and x86 installations of 3ds max. We have reinstalled 3ds max countless times. My colleagues have identical computers, hardware wise, haven't had the same issues. We're using SP2 patched 3ds max 2012 too.
I have PSP 15.2.0.12, win 7 64-bit machine with ample power and graphics card. Regularly run multiple CAD programs and so on.
When I double-click the desktop icon to launch the product it crashes - always.
When I double-click an image in Windows Explorer, it launches OK and opens the file with the Edit tab active.
How to resolve the dbl-clk desktop death?
Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up. 32 bit version of Photoshop works fine.
Here is the problem signature when they crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.0.0.0
Application Timestamp: 4bbc5b10
Fault Module Name: CoolType.dll
Fault Module Version: 5.7.82.7602
Fault Module Timestamp: 4b980c97
[code]....
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine.
Looks like something to do with 360 is cause C3D2013 to hang on startup. I have to kill the AcSettingSync.exe service to in Resource Monitor to make 2013 un-freeze.
View 3 Replies View RelatedSee Attached.
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
How can i take several images put them all together and make them look like they all belong where they are, like lighting conditions etc.
View 4 Replies View RelatedWhile using Explorer 9, it is empty. Anyway, I've switched to compatability mode.
I have this issue with 2 installations of Civil3D 2011-64 bit. I have 2 monitors. When first starting up, while Civil3D is loading, if I move to the other monitor and do any activity with the mouse, once civil3D is loaded, it is frozen. I can't do anything with it and need to use Task Manager to close it. If I just leave the mouse alone until Civil3D completely loads, then I'm fine. Just a minor annoyance, but have never experienced it with earlier versions.
I have a Win7 X64 PC running C3D 2103. I recelty installed this for the first time and am seeing the following error message when I launch the application.
I've tried to do a repair and still get the message.
I created a Net dll plugin and successfully loaded in Civil 3d 2014 with NetLoad command, the plugin contains a ribbon bar with a ribbon button launching a dialog.., but when To be Loaded automatically (by AutoLoader) at startup it did'nt load, is there any way to make it load automatically at Civil 3d start up
here its my ContentPackage.xml
<?xml version="1.0" encoding="utf-8"?><ApplicationPackage SchemaVersion="1.0" AppVersion = "3.0" ProductCode = "{E74E298D-D430-4100-83D0-CA230BB00A41}"> <CompanyDetails Name="ESOL Engineering Bureau" Phone=" " Url=" " Email="eng.ims134@gmail.com" /> <RuntimeRequirements Platform="AutoCAD|AutoCAD*" OS="Win32|Win64" /> <Components> <RuntimeRequirements OS="Win32|Win64" Platform="AutoCAD|AutoCAD*" SeriesMin="R19.0" SeriesMax="R19.1" />
[Code] .......
Up to 2 days ago I had ATI Catalyst 12.2 installed. I was able to check all the boxes in the Advanced Graphics Processor Settings dialog and they stayed set. Specifically, I had [ ] Use OpenCL set and Photoshop CS6 worked very well.
Because I need to know about the quality of newer drivers for my own product development, I upgraded my ATI driver suite to the current version - Catalyst 12.4.
Unfortunately, this caused new problems I hadn't had before - specifically a number of GPU-accelerated features didn't work, such as Oil Paint, which would appear to try to start then just exit a split second later. And with Catalyst 12.4 the [ ] Use OpenCL setting became unavailable (grayed-out).
With my own testing done, I decided to completely uninstall the ATI Catalyst 12.4 suite, and drop back to Catalyst 12.2.
This was a simple matter of uninstalling everything AMD then rebooting (with the Windows driver), then installing Catalyst 12.2. That went smoothly. However, now I still do not find the [ ] Use OpenCL box has become available again - it's grayed out:
there are no remnants from the 12.4 drivers left on my system (though there's a possibility I could have missed something), and everything from the 12.2 set installed successfully, so the question is this:
Did Photoshop sense something about the 12.4 driver set, then set some kind of permanent "No OpenCL" flag in its own configuration settings? Here's my system info with the 12.2 drivers installed. Note the "OpenCL: Unavailable" entry. URL....
Note that all my GPU-accelerated features seem to work... Oil Paint works and is plenty fast, the various Blur tools work nice and fast, I can do 3D rendering (though there's one small glitch I've had since Photoshop CS6 was released where occasionally it becomes unresponsive for a few seconds at a time while doing 3D work). But it does finally respond.
Have tried on several machines with same result.
Have to manually reload xref after opening drawing to get sections to change.
Autodesk, Can I get some confirmation that it is working, or not?
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
In trying to get to grips with the Color management aspects of PSE11, I have encountered the following problems: Having selected "Display" a sequence of clicks (Change display settings -> Advanced settings -> Colour Management -> Colour Management tab -> Colour Management) gives a screen which includes the headings:Device Profile and Viewing Conditions Profile.
1. Device Profile. Besides sRGB and ARGB, the profile list includes the profiles for all of the Epson papers.I changed the Profile to an Epson Grayscale, this was accepted within the menu, but there are no changes from normal when I viewed the image on the Windows screen or within PSE11. ("normal" is sRGB or ARGB). I thought it worth a try to test that, if I wanted the display image to closely represent what I would get on a particular Epson paper, this may be a way to do it.So what is the purpose of all of the paper Profiles appearing in the Display listing?
2. The Viewing Conditions Profile has also several options. I have tried to find the criteria for choosing one rather than the other, but failed to find any information. I seek general guidance rather than the details of the Profiles.
Selecting Image on the PSE11 menu across the top of the displayed image, and then Convert Colour Profile, I tried this process on an image, converting tiff to sRGB. When saved there was an extra asterisk in the saved title but in this case, the file was still labelled tiff and there was no change in the number of Mbs. If a conversion has taken place, how is one to know? Does saving a tiff file as jpeg change its colour profile? When is it useful to use this feature?
I am suddenly getting the error message "No images on the memory card meet the download conditions" when I try to import my pictures into Lightroom 5. My other cameras are importing to Lightroom as always... just fine. I have tried a direct import from the camera and also an import with my card reader and I get the same message. I have also changed cards with this camera and get the same error message.
View 3 Replies View RelatedAfter installing SP1 2014 Autocad started to crash by loading DLL that contains Civil 3D libraries. In the same time Civil3D works perfectly. Is there a way to load some DLLs when starts Civill3d but not Autocad?
View 2 Replies View RelatedWhen I attempt to import a PKT file from SAC, C3D crashes. This includes custom ones that I created as well as samples from the ADESK site.
View 9 Replies View RelatedAbout 50% of the time, when I take a screenshot of part of a pdf (using acrobat's screenshot tool) when I go to paste it into C3d, I choose paste special, and then image object, and the screen goes pale and I get the C3d has encountered an error and needs to close message.
I have installed the latest hotfix which was recommended after a save to dxf crash this morning but just had it crash out again with a paste special.
When this crash happens, it never asks me to send in a report.
I am using C3d 2013. the 64bit version, on Win7 pro 64 bit SP1,Intel (R) Xeon (R) CPU E3-1240 V2 @ 3.40ghz and 3.40ghz. 16gb RAM, and AMD FirePro V5900 2gb graphics card.
The computer should be able to cope, but I find that it lags if I just insert whole pdfs and I usually only need a bit of the image.
Is there anything I can do apart from always convert the pdf into a jpg first?
The crashing is consistent every time I try this. Here is how I replicate the problem:
- Open a SheetSet.
- Right click on the sheetset and select Transmittal Setups.
- Click import.
- Select a template DST and click open.
- Check a setup and click import checked.
Civil 3D Locks and an error saying "AutoCAD Application has stopped working" pops up and whamo. I have custom eTransmit settings and here they are just in case,
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409ETransmitsetupsBack-Up]
"AEC_EXPLODE_DWG"=dword:00000000
"Name"="Back-Up"
"AEC_TEMP_SETUP"=dword:00000000
"AEC_INCLUDE_PROJ_INFO"=dword:00000000
[code]....
Lately, whenever Civil 3D crashes, my menus and ribbons would freeze, but my command line still works. It's like the entire user interface locks up. I'm able to workaround the problem by rebooting the computer and then recovering any drawings I had open at the time of the crash.
-Civil 3D 2013 sp2
-Windows 7 64-bit
-Intel i7 Dual Core with 2.40 GHz
-8 GB of RAM
-AMD Radeon HD 6770M
-Civil 3D user since 2007
I often get a crash after using the ViewCube tool to pick front view while in top view (today I was in tilemode 1, in a fairly simple 3D drawing).
View 3 Replies View RelatedCivil 3D crashes when I open the Layer Properties window. What is the best way to fix this issue? Will the standart AutoCAD 2011 1.1 and 2 updates work?
View 1 Replies View RelatedCivil 3D 2010 was crashing for an employee. I uninstalled Civil 2010 and attempted to install 2011. He still has a fatal crashing error. I also removed his temp files.
View 7 Replies View Related