running autocad 2014 lt in windows 7. I ran trail program which was prefect. When I downoaded the program from a CD the screen is fadded or pale. How can I get black screen with shape images?
View 3 RepliesWhen Autocad is started, it appears to be in a maximized window (it covers the entire screen and the windows maximize icon in the upper right corner shows maximized, but if I click on the top of the screen I can still drag the location of the Autocad window as though it was not maximized. Clicking the windows button to show in a window reduces the Autocad window as it should and re-clicking to maximize APPEARS to maximize Autocad, but it can still be dragged from the top of the screen.
This is not a windows problem, because all of my other programs (internet explorer, MS word, etc.) will maximize as they should.
I am running windows 7, 64 bit and Autocad 2014.
I recently gave my windows a factory restore (fresh start windows original copy), I had no issues with autodesk software before the windows fresh start (i use Revit and 3Dmax too), i even installed and used Autocad 2014 on my laptop before the restore and it ran just fine, problem is now after the windows restore Autocad crashes everytime i open it, installation was smooth and succesfull with no error warninings whatsoever; the problem comes when i start Autocad 2014 for the first time, the initialization window opens and starts loading the files but then (everytime) crashes and freezes my laptop forever, not even the task manager is posible to open
My Specs:
Laptop: Alienware M14x R2
Processor: intel i-7 @2.30 ghz
16 gb RAM
Graphics: Nvidia GeForce 650M 2GB
running on Windows 7 64-bit
after the restore i downloaded the latest drivers for my graphics card, so that shouldnt be the issue, i also switched the processing tu GPU only.
i already tried lots of solutions i saw on other posts, but none seems to suit my need, i tried the .NET framework thing, switching off the windows Aero theme, but the problem remains the same, it still freezes completely my laptop everytime i try to run Autocad 2014, i even tried installing Autocad 2013, Autocad 2011 and Revit 2014 but the issue is the same in all of them they freeze at startup without any pop up error warnings, just freezes.
We are launching Autocad 2014 in a multiuser environment and trying to determine how to stop the WELCOME screen from appearing.
The /nologo switch is for a different screen. Need per user or prefer per computer registry setting to turn off the Welcome Screen.
Thought it was InfoCenteron key,set to 0, but that was not it.
Thought it might be MC3 key, but not there either.
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I receive and update many drawings created by the same organization (using AutoCAD LT 2012). Often, when I plot to PDF, the lettering in the labels becomes faded (like every-other letter within the same word). I have tried all available pen assignments, and many different lineweights and fonts.
View 9 Replies View RelatedI have some building department forms in pdf format that I have inserted into paperspace in a layout. They appear fine in layout view and in print preview.
But when I print the layout to pdf, the attached pdfs all print faded. The pdf (as an underlay) is set to fade = 0, contrast = 100. No transparency setting I can find. The layer transparency is 0 and the plot style is at 100% screening.
If I set the layout to *NOT* print transparencies, then the pdfs print dark as they should. But I sometimes use transparency for shading or poche, and would like to be able to use that and also have an inserted pdf print properly.
Is there a way to set pdf underlays to print at full density? I seem to remember finding a global setting for this once, but can't find it now.
When i open the drawing and every time i am zooming in and out the color is getting faded, i am in paper space.
View 7 Replies View RelatedIs there a way to make the x-ref's a little less faded?
View 5 Replies View RelatedI have a problem I created some drawings and made them XREF everything works fine until i try plotting them, the objects that are on the main drawing plot just fine but the XREF for some reason comes out faded not as vivid as i would like them to be. I already updated the drivers for my plotted it's an HP Design Jet 1050c it's an old one but the problem only exits when plotting drawings with an XREF.
View 2 Replies View RelatedIs there any options for Xref files and/or attributes to screen down or fade down other than changing its color to gray?
View 4 Replies View RelatedWhen printing in AutoCAD 2011 when using the "DWG to PDF.pc3" printer, many lines in the resulting PDF are faded while others appear fine. I can zoom in and all the lines appear with the same weight. There are multiple layers on the drawing but all contain the same line weight and lines on the same layer appear with different weights.
This occurs on all AutoCAD files and all users. I have tried changing pin assignments with no success. Printing directly to Adobe PDF does not result in this issue but with each sheet of drawing being a different file this process uses a lot of time.
I need to illustrate a faded etch effect on a piece of glass. I've attached a sample image for reference. Is there a way to do this in Inventor?
View 2 Replies View RelatedRegarding the fuzzy, faded out text in the C3D Text Component Editor. (See this link) [URL] ....
Does really run Win7 with Clear Type Text disabled? We've tried that and with that disabled, everything else in Windows worse. I wish they would just fix this dialog in C3D.
How do you get an xref to appear faded when plotted onto paper?
I tried putting the xref's on their own layer and adjusted the transparency level.
I dont know whats going on, but all of a sudden all the prints i do to PDF have a washed out faded look about them.Now all those lines are on the same layer, set to print with the same pen thickness, so why does one appear bold and one hardly visible at all?
View 9 Replies View RelatedXref in attached on a layer. Layer is locked. On the screen it looks faded.
Is there a setting so it doesn't look faded in options or elsewhere?
I have tried the Fade control under tab Display, but it is not effecting it
Can somebody show me how this border effect is done? I've been trying to figure out cause I'm seeing this effect a lot lately.
View 3 Replies View RelatedAll of the colors when I use brushes always appearance very faded. It takes a couple of layers and 're-clicking' too get the dark color I'm looking for. I've tried re-installing and re-setting default's, but it hasn't seemed to work or I'm doing it wrong. I was wondering if there was a way I could change the default. This is for CS3 Beta BTW.
View 2 Replies View Relatedim trying to make a fading grid i cant think of a way to do this is there any way to do this?
i want to lines to start fading out on the right hand side of the image.
I want to do a montage of a load of portraits (which i've cropped from other pics) which are all faded and merged together in a circle and I then want to put a logo on top of it.
View 1 Replies View RelatedI'm trying to import a jpg from PS into Flash. When I do, the jpg is washed out looking. The save preview in PS looks great, but when I open the jps in any other program, it looks washed out.
Any ideas?
Model Space Screen Darkens and am unable to see screen
View 2 Replies View RelatedI have a scanned image. As you can see there is a line that above it the color has faded. IS there a technique / command(s) to restore the faded colors to the ones below the line?
[URL]..........
When printing any document through Photoshop CS5, it's printing at about 25% opacity. If we open the file in Preview or Word, it prints just fine! What do I need to change to get PS printing correctly again?
This all started when we downloaded a template offline. My co-worker designed within the template and when she went to print, it was faded. I tried printing a photo from my computer to the same printer quick to troubleshoot what the error might be (low ink, etc...) and my photo printed 100% ok. I then opened the file she designed, tried printing it and it was faded. I then tried printing the photo that printed earlier fine and now it and everything else I print is faded! What in the world changed? We've tried restarting both our machines, restarted PS, deleted and reinstalled the print drivers, etc... But to no avail.
We're printing to just a simple desktop printer, a Canon MP210.
I've been trying to make lines like these to no luck:
I'm aware this can be achieved with the pen tool. Path stroked with a brush with some settings altered. Most likely Fade.
This is where I am so far:
Problems:
I cant get BOTH ends to fade.
A long path wont get fully stroked since the fade happens too soon.
I want the edges of a picture to fade into the background. I know I can use the erase tool to obtain this effect. A friend of mine showed me a few years back a different and somewhat easier/quicker way. She showed me to use the rectangle/elliptical tool and select the area you want to show. Then select inverse. After that use the feather option to round the edges/amount of feathering. My question is what would be the next step? I know there is something else that needs to be done to actually fade the border, but I can't for the life of me remember.
View 1 Replies View Relatedi'm trying without success to fade the edge of some photo's.I need to reduce the opacity of about 2cm all the way around a photo.
View 9 Replies View Relatedthere is a picture and it is kind of greyed out a bit then there are a couple of boxes around some important things that are in focus.
View 1 Replies View Relateddoing is applying a faded edge type effect to some images, the effect I'm after is used on the following website
not sure if this was done in photoshop or not but if it were to be, how would one do it?
To me it looks like layers, transparency etc by placing the worn edge on top of any image, just want to be able to create the worn edge in the first place.
ok, I have a quick question, and I am a beginner, sooooo, I was wondering how to take a an image and make it like faded in the background and then put more images in the form of a collage on top of it?
View 1 Replies View Related