Regarding the fuzzy, faded out text in the C3D Text Component Editor. (See this link) [URL] ....
Does really run Win7 with Clear Type Text disabled? We've tried that and with that disabled, everything else in Windows worse. I wish they would just fix this dialog in C3D.
For labels, is the font decided in the general tab under text style or in the text component editor under the format tab? Are there overrides? There seems to be multiple locations for fonts choices when creating a label and I can't find a nice black and white answer.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Text Component Editor dialog box not working. URL....Here is an example.I can't modify Label text from Sections and pretty much everything in this area.I think everything happens because of the Country Kit I have installed.Is there any way to repair it? I have all service packs installed on CIVIL 3D 2012.
Here is the error i get: Cannot find the resource string number 25202 in resource - 551157760
I think the problem is coming from Country Kit. Since I put it and I'm using it as a template, my Civil 3D is coming with THOUSANDS of errors.
While making an In-Place Component, Revit fades everything else and makes it hard to see anything except for what you are working on. Is there a way to change this so that everything else isn't as faded.
View 2 Replies View RelatedHow to reach Reference Text Object in Vba?
We can add Reference Text in Label Components. it can be referenced to Alignment, COGOPoint, Parcel, etc. For example, after that it is needed to select a COGO Point, and Label is changed from "???" to a property of selected Reference Object. I want to add Reference Text by VBA.
I extracted a dynamic feature line from the gutter flowline of my Corridor. I labeled Multiple Segments for the feature line with a grade and vertex style that uses the "General Segment Grade" text component.
I am overiding lane cross slopes in the Section Editior and the segment grade labels for the extracted feature line do not update after I Update Corridor in the Section Editior.
If I raise/lower the CL profile of the corridor, the label updates. Just not reacting to these Corridor edits.
Peculiar behavior: The label will update to reflect the Corridor update if I Isolate it.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
1. when I edit or create text in a particualr drawing, I can't keep the editor from rotating 90 degrees.
I've tried creating a new style and it does the same thing both in model space and in Paper Space.
2. in a new drawing, the editor jumps out of drawing area on right side of drawing space by default.
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64
II need a way to tell if a component occurence is a virtual component.
I'm using a For Each loop to cycle through all of the components in an assembly, and if the component is itself an assembly to set the LOD to "Custom". I'm using the definition document descriptor object for this. It all woks fine until the loop comes across a virtual component which doesn't have a definition document, so I need a way to check if the component is virtual and needs to be skipped.Here's the
Option ExplicitImports Inventor.LevelOfDetailEnumSub MainiLogicVb.UpdateWhenDone = TrueDim doc As AssemblyDocumentDim oLOD As LevelOfDetailRepresentationDim oAsmCompDef As ComponentDefinitionDim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesdoc = ThisDoc.DocumentIf.
[code]....
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
View 2 Replies View RelatedI was wanting to know it it is possible to get a block component out of a pipe label with the API to project onto a profileview.
The reason a want this is that to label lot connections in the form of a wye connection I typical use a pipe label with a stick block at 45 degress to represent the connection then explode it and use project to profile view command so the lot connection applies there as well. Just wanting to do it faster thru using code if it can be done.
I am trying to link component parameters to the assembly and leader text always picks up the particular part in the assembly rather that the assembly as a whole. I want to point to a door assy with leader text and say it is "DOOR A" using model parameters but leader text picks up the particular part I am pointing to with my leader text rather then the assembly.
View 3 Replies View Relatedtrying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
I have surface style (could be slope or spot elevation) with a 2 line component, and text component above and below the line. I'm trying to create on style for many options. I'm using c3d 2013, but moving to 2014.
I would like to do the following after placing the label:
1. adjust the length of the line component. (ex: as I rotate the lable, the length of seg 1 changes )
2. turn off one of the line component
3. adjust the angle of one of the line component.
4. when drag, the length of the line changes to a new value.
and while I'm asking, is there a way to move/rotate/drag the syle to a percise distance. I want the leader to be 1 unit long at 30 degree angle.
Cannot delete label style component. This is for line annotation labels.
I created a child BRG-ONLY from a BRG-DIST and it will not allow me to delete the distance component. The red X is faded and not clickable.
This is my second day with a new company, and when somebody else created a similar child style apparently they could not either. The just made the distance component invisible... which I guess works almost as well.
How would I be able to pick a specific component to make sure I can delete it?
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
When I reposition structure labels (in their 'dragged state'), the component <[Structure Offset Side(CU)]> does not show up while in drag mode. Sort of makes it hard to see the limits of the label if you are trying to place it in a congested area. Watch the "LT" part of the label in the GIF below.
No, it's not that big of a deal, but alignment labels with the same component do not behave this way, so I have to wonder why the structure labels do.....
In an .idw environment, I have multiple models displayed.I am trying to create simple text labels for each model using text, modifying each one so that it will display the part number and the revision level by using the "Component" drop down box and assigning the proper "Type" and "Property", then using the "Add Text Parameter" button to place the fields into the text box.
This works as intended for the first model that I created a view for. However, it will not work for each successive model; the text will revert to the part number and revision level of the first model that was brought into the .idw environment, even if I change the target component in the "Component" drop-down box.
In the .jpg that I have attached, you can see that I have 035-14218 selected in the "Component" drop-down. This is the initial model that I brought into the .idw. and the resulting text is correct.
Windows 7 Pro, SP1
Inventor 2012 SP1
Getting this error when trying to etransmit a file. E-Transmit failed to load transmittal component: incorrect registry entry
View 8 Replies View RelatedI have an assembly which has a few components suppressed.
My end results is another copy of the assembly (with copies of the all the parts) in another directory
Now i am able to create copies of un-suppressed parts using; (this allows me to SaveAs assembly components which are not suppressed)
DocumentsEnumerator = ThisDoc.Document.AllReferencedDocuments
And save a copy of the assembly using
ThisDoc.Document.SaveAs
I also added the fllowing snippet (which I am not sure what is does), but it does not work for me
Component.SkipDocumentSave = true
When I open the newly created assembly, I still see the suppressed components in the model browser
I want to either;
Skip saving the of the components in the model browser (i.e. the Assembly)
OR
Delete the suppressed parts in the Assembly, so that they do not save altogether
I'm trying to copy editable text from a Word file into the text editor for GIMP. Before I upgraded to 2.8, this was possible, but now it seems not. I'm on 2.8.4 using OSX Mavericks on a Macbook Pro.
I'm a terrible speller and since GIMP doesn't support spell check, this was always my workaround.
I've been doing some family as an independent construction detail revit model, I think that is the most appropriate type of detail component. Graphically everything right but I encounter the following problem, all built to type text is not visible in the project then.
How do you control the display? or do you like I can put a text in a detail component family? and if not visible... why would have the option of make texts? Is the only option to annotate after in the project insertion?
when I go to edit a text in my drawing using dd edit. The text I want to edit is Italic T, but when I start typing it automatically changes to Txt. font. So every time when I'm done typing I have to highlight everything I typed and change the font manually. On an older computer I had I never had to do this.
View 0 Replies View RelatedYou can define a MiniToolBarTextEditor...
Private WithEvents m_text As MiniToolbarTextEditor
but later, when you create the MiniToolBar, on the controls there is no AddTextEditor...????
Dim miniControls As MiniToolbarControls = m_MiniToolbar.Controls
m_text = minicontrol.add HERE SHOULD BE THE TEXT EDITOR... I can add anything else! where is the text editor.
I tried the value editor, but it cannot take text!
A fellow cagemate is having some trouble with his Text Editor and I swore I'd (Cadtutor) solve it for him.the top is of the Text Editor as it usually is with the width adjustment ruler on top, the bottom image is taken from his ACAD which as you can see does not have this ruler. This happened yesterday and we have not managed to restore it back to how it was.Has he turned it off somewhere? How can he get it back?
View 7 Replies View RelatedI have lots of MTEXT on a single layer which has the Bylayer colour Red but all the MTEXT is showing as Yellow. When you double-click one of the MTEXT letters it opens the MTEXT editor and I can see that the text has been manually set to Yellow in the ‘Text Editor Colour Gallery’.
Is it possible to change all the text back to Bylayer?
I have already tried using the 'SETBYLAYER' command but this hasn’t worked.
I'm using AutoCAD 2012.
Is it possible to modify .DXE files with a text editor?
I want to quickly find & replace the file paths DXE's are looking for (rather than run eattext every time I have a new drawing), but after opening in Notepad or Word AutoCAD displays error "...not valid extraction file."
BLK's were nice because files could be renamed and the schedule would still work. Now, the DXE will look for the old drawing rather than the one which has been renamed. Copying a file or using a template is impossible because you have to run eattext & create a new DXE every time the file name changes.
i have a drawing boarder block, which I need to edit some of the text.
When I open it up in the Block Editor and click on some of the text, I get a pop up with the fields in. When I change a value and close, it is reflected in the block. All normal.
However, with another text field, when I click it, it wont select, but just selects the other block of text. Of the three blocks I have, I can only edit one of them.
The strange thing is, if I am in the normal layout view, and double click the problem text I then get the pop up with all the fields and their values. Only when I change one of them it is not reflected on the viewpoint.
I have a short corridor, about 300', that ends at a cul-de-sac, and has multiple sections and alignments associated with it. My problem is when I need to edit a section in the "Section Editor" my computer feezes up. It was working fine for a while but now I can't get it to work even on a new drawing. If I can't get this fixed I will have to got to using feature lines. Which is not ideal.
I added a screen capture of my computer's information. And I have the SP1 installed for Acad.
When I click view extents in section editor it zoomes to my assembly. WHen I go to my next station, it zooms out to ridiculous values. How can this be set so I can do some work? I want to view my assembly and a few feet extra left/right/above/below.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I'm in the process of going from LDD 2008 to Civil 3D 2012 and I'm having some difficulties with the profiles. In LDD there was a vertical alignment editor for profiles where I could edit the surface profile stations and elevations. Has that feature gone the way of the Dinosaurs or is it in Civil 3D somewhere?
Once in a while the profile doesn't pick up a curb line or a change in elevation. Its just simpler sometimes to add a station and elevation without going in and spending time editing the surface so the profile reads correctly.
AS3: In component list my icon and label text are not align properly, when app is started, label text is over icon and when I put mouse pointer over any item in the list then alignment it's ok.
This is when I test flash app: And when I put mouse pointer over any item, alignment of icon and label is ok! Here is code:
stop();
import fl.controls.listClasses.CellRenderer;
import flash.text.TextFormat;
import fl.controls.List;
import fl.controls.Slider;
import fl.events.SliderEvent;
import fl.controls.List;
[code]....