AutoCAD Civil 3D :: Section Editor Lock Up
Mar 14, 2013
I have a short corridor, about 300', that ends at a cul-de-sac, and has multiple sections and alignments associated with it. My problem is when I need to edit a section in the "Section Editor" my computer feezes up. It was working fine for a while but now I can't get it to work even on a new drawing. If I can't get this fixed I will have to got to using feature lines. Which is not ideal.
I added a screen capture of my computer's information. And I have the SP1 installed for Acad.
View 2 Replies
ADVERTISEMENT
Aug 12, 2013
In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies
View Related
Mar 8, 2012
I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
View 6 Replies
View Related
Mar 27, 2013
When I click view extents in section editor it zoomes to my assembly. WHen I go to my next station, it zooms out to ridiculous values. How can this be set so I can do some work? I want to view my assembly and a few feet extra left/right/above/below.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 4 Replies
View Related
Sep 18, 2012
Every time I go into Section Editor while working on my corridor I have to reset my Code Set Style Selection. Its not even like I am exiting and re entering the drawing, just the Section Editor. Is there a specific place C3D looks for that style when you enter the editor?
Civil 3D 2014
i7-3930K Overclocked
32 GB Ram
Windows 7 Professional
View 2 Replies
View Related
Jun 22, 2012
C3D 2012
When I open the Corridor Section Editor, the Ribbon changes to the Section Editor ribbon, but the section window doesn't come up. If I pan around, parts of the drawing disappear. If I close the editor and regen, everything comes back.
View 5 Replies
View Related
Oct 4, 2013
Below is the current status of our working view in the 2014 Corridor Section Editor. I can't see us getting any value for our investment into Civil 3D 2014, before Civil 3D 2015 comes out now.
The polar opposite is actually true, we had too much downtime encountering, analyzing and reporting product defects, and it affected profitability and capability.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
View 1 Replies
View Related
Nov 14, 2012
When I get into my section editor, the view is zoomed out too far. is there a way to change the width of this view? i looked in display options, but may have skipped over the solution.
View 2 Replies
View Related
Oct 1, 2012
How do I turn off the elevation grid in the section editor when looking at the cross-sections of my corridor?
View 1 Replies
View Related
Sep 24, 2012
I've built a corridor using only an Offset Assembly. The assembly represents a new path alongside an existing road and I wanted to use the centerline of the road as the main baseline. I have successfully built the corridor and was able to build the Sample Line and Sample Views. However, I am not able to view the sections in the Section Editor. As soon as I try to get into the Section Editor, I get the error message "No station found". The stations are large, 500+00 and up, so I tried changing the BOP to 0+00, but that had no effect. I tend to think it's a result of not having any subassembly attached directly to the main alignment, only to offset alignments. I'm running the 2011 version.
View 2 Replies
View Related
May 25, 2012
How do I access the Corridor Section Editor view settings and copy them from one drawing to another?
View 1 Replies
View Related
Apr 30, 2013
Is it possible to adjust the vertical exageration of the section view in the corridor section editor?
View 1 Replies
View Related
Jul 26, 2013
I have 3 alignments running: EB, WB, and Center alignment. My corridor runs along the EB alignment. Is it possible for me to develop section views for this corridor along the Center alignment?
View 6 Replies
View Related
May 3, 2013
Getting bizarre display in the Section Editor of the 3D Polylines that are in the drawing. The green line is the EG ground section.
In 2013, this same drawing displays normal, we don't see the 3D polylines in the Section Editor.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
View 2 Replies
View Related
Aug 24, 2012
How do I get rid of the green circles in cross section editor? I have looked in the code set styles, and I have found nothing that will resolve this.
View 2 Replies
View Related
Jul 29, 2013
What could be the trick with corridor section editor in C3D 2014, applying overrides to a stations range won't work. After selecting or typing end station in the 'apply to a station range' prompt nothing happens, the overrides just will not be applied.
To apply overrides for an subassembly (curb depth etc) I must go through all the stations set by corridor frequency in the station range. This is not file specific, as it is the case with all my projects.
View 1 Replies
View Related
Jul 7, 2011
I've worked with LDD for 11 yrs. Last week the IT guys changed my PC to Windows 7 64bit, so I can't have LDD and I have to work with C3D. so I am following software tutorials.
for designing a road I created:
alignment ---> surface profile ---> layout profile (project line) ---> assembly ---> subassemblies ---> corridor ---> set target surface and frequencies
Corridor is created with daylights ,but I don't see existing ground in corridor section editor.
There is nothing about this in tutorial. Also I don't know how to calculate the volumes, in LDD after this stage we could calculate the volumes. i think in C3D I should do more for calculation.
View 9 Replies
View Related
Jul 13, 2012
I'm having a random issue with the daylight ties lopes not tieing to the EG surface at all stations in the Corridor Section Editor. Some stations daylight fine. In plan view the daylight lines vary left & right as expected but don't display at all in Section Editor.
Some background info:2012 Civil 3D SP1 / 64 bit / WIN7Simple corridor used1 alignmentSame fg profileSame drefd EG surface (set all targets for daylight LT/RT)Only one assembly applied to entire corridor Attached are 2 captions of the issue I'm having which each have a cut & fill occurrence as well as a caption of the entire align. & corridor. I did try deleting corridor & recreating and even recreated a simpler assembly and still have the daylight issue in same areas of corridor.
View 2 Replies
View Related
Nov 11, 2013
Unable to edit parameters in Corridor Section Parameter Editor
View 4 Replies
View Related
Aug 26, 2013
It worked fine until the update. Now it's showing EVERYTHING.
View 2 Replies
View Related
Jan 9, 2014
I have added intermediate sample lines in my corridor. These sections appear in the section editor and I can make changes to the data. The changes show correctly in the section editor and section view, however, when I plot the cross sections some of these added stations do not show the overrides. They are showing the original assembly group parameters. How do I get all the cross sections to reflect the edited data from the section editor?
View 3 Replies
View Related
Feb 20, 2013
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies
View Related
Mar 26, 2012
C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
View 1 Replies
View Related
May 21, 2012
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
View 8 Replies
View Related
Jul 17, 2013
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
Mar 5, 2012
I think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
View 3 Replies
View Related
Oct 12, 2012
I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies
View Related
Nov 8, 2012
I am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
View 5 Replies
View Related
Oct 16, 2012
My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies
View Related
Dec 5, 2013
In Civil 2013 is there a way to lock where you drag the tool bars? I work on dual screen and drag my properties and layers manager over to the second screen. Randomly they will jump back from the right screen to the left screen on program restart.
Also when I open the grading toolbar and drag it over to the right screen some commands, such as breaking a feature line, will cause it to jump back into the middle of the left screen right then.
Is there anyway to lock the toolbars to where they were dragged last?
View 2 Replies
View Related
Nov 25, 2013
Not everytime but very often when I create a quick profile from line, polyline or feature line, my Autocads locks. The only thing I can see is the command prompt asking to specify the point of origin for the quick profile and I can't seem to do anything. The only way to get out of the command is by trying to close the autocad window in the task bar or task manager.
To fix this it takes various steps: regenall, zooming out, but still the odd time I get it to work. This seems to me like a video card issue, but I had this problem with several video cards and windows versions (7&8). Currently using Nvidia Geoforce GTX 770M.
View 4 Replies
View Related
