You can define a MiniToolBarTextEditor...
Private WithEvents m_text As MiniToolbarTextEditor
but later, when you create the MiniToolBar, on the controls there is no AddTextEditor...????
Dim miniControls As MiniToolbarControls = m_MiniToolbar.Controls
m_text = minicontrol.add HERE SHOULD BE THE TEXT EDITOR... I can add anything else! where is the text editor.
I tried the value editor, but it cannot take text!
I was given a customers title block but there are no defined attributes. I'm using AutoCad Electrical 2010. I have to double click on the title block and the edit block definition box pops up. I select the block to edit and click ok. I would like to use the enhanced attribute editor on these title blocks. Is there a way to define the attributes on this kind of title block using the enhanced attribute editor?
View 9 Replies View RelatedAutodesk 2013 Inventor Professional.
1. When in style and Standard editor with default standard selected under Standard I am trying to display mass properties in my view label.Select View Preferences tab. View type Base. Next to Display select Edit View Label.When Format Text box pops up in the selection for text type I have two options.
a. Properties - Model
b. View Label Properties
2. Inside an IDW file right click on view and select edit view.When Drawing View box pops up there is the option to access Edit View Label next to View Identifier.When Format Text box pops up in the selection for text type at this point there are seven options.
a. Properties - Model
b. Properties - Drawing
c. Drawing Properties
d. Sheet Properties
e. Physical Properties - Model
f. View Label Properties
g. Sheet Metal Properties
Questions 1. Why are ther only two options in S&S Editor?
2. Can I add more options to S&S Editor?
I would like to add mass to my lablel inside certain templates and have it show when I display a views Base view label. Not ot have to maunually add it each time it is displayed.
How de define a frame around a text with a short-key ?
In Illustrator, I want to know if there is a keyboard shortcut allowing me to set the size of a block of text from the text inside ?
I have an assembly which serves as a configurator. This Assy, needs to be copied many times. The assy contains 2 parts, which also must be copied. but when copied, the parts must have a new filename, and then the Rule cannot find them anymore. Therefore my plan is to define the filename with the configurator rule..
Example.:
Assy = Module.iam
Part1 = Module-1.ipt
Part2 = Module-2.ipt
I have this so far, but is doesn't work.. what do i put before the .ipt??
Filename = ThisDoc.FileName(False) 'without extension[Filname-1 inserted here].ipt.Diameter = "30"
I want to use a parameter in my assembly as the name of a part i'm referring to in a rule but so far I have had no luck making it work. My knowledge of iLogic is pretty limited.
I am making a configurator for a staircase and I am working on the stringers now. There will be 3 or 4 different stringers (each one is a separate part) and the configurator lets you choose things like the angle, length and height of the staircase by entering values for those in a form in the assembly. Once you are done entering the values, there will be an update button that will send all the parameters to the different parts that are in the assembly and have them change accordingly. Now, say I want the length to change. I enter a length and press update and here's my problem. To which stringer-part is it going to send the length to? I can make it send to all parts but that means that I have to write one line of code for each part and if I ever add a new kind of stringer, I need to check all the rules and new lines where needed. I would like to make this dynamic by having only one line in which the part name is the same as a parameter I have in my assembly
I can either write it like this:
Parameter("Stringer1:1", "Length") = LengthParameter("Stringer2:1", "Length") = LengthParameter("Stringer3:1", "Length") = LengthParameter("Stringer4:1", "Length") = Length
But I would like to write it like:
Parameter(""Assemblyparameter":1", "Length") = Length
Where Assemblyparameter is a text parameter and simply the name of the part that is inserted.
When I choose, for example, stringer 3 in my form, Assemblyparameter will be Stringer3. This would save lots of time in the future whenever new parts are added.
way to define a path for a part to move in an assembly?
Find attaced models for valve, pig and assembly.
the final goal is to deturnime the maximum size pig that will travel thru with out interfering.
I believe the path for the leading end will be different than the trailing end.
I am using projected and sketched geometry (2D sketches) in assembly space to create lines/ points that I intend to use to define planes and axes. The problem I have is that nearly all the geometry I create (lines and points in 2D sketches) is not "selectable" when I try to create planes or axes. I cannot even put a work points "on top of" my sketch points. Why are my sketches not usable in the assembly space? Since the components in my model are just two extruded rings I don't have any linear edges I can select to make this work/ define planes.
View 9 Replies View Relatedthe only property I can actually define for each individual sheet (for use in iLogic, text fields, etc.) is the sheet name. This is extremely limiting. Each sheet in my drawings has several properties of its own--sheet number (most importantly), what part is ON the sheet, the designer, the revision, etc. I would love to be able to use each of these in labels on the sheet, for example, a text box with "<Sheet #> - <Part> (<Designer>)". The only possible way I could do something like this is to use the sheet number as the Sheet Name, and then use that value in the sheet's text labels, headings, and title block. However, I want to be able to use descriptive names for the Sheet Name, plus that's just one property.
Is there any way I can create and define multiple custom properties for individual sheets? I was exploring the idea of using iLogic, using the ActiveSheet command, possibly, and "tricking" inventor into creating properties for a given sheet.
For labels, is the font decided in the general tab under text style or in the text component editor under the format tab? Are there overrides? There seems to be multiple locations for fonts choices when creating a label and I can't find a nice black and white answer.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
trying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
I'm trying to copy editable text from a Word file into the text editor for GIMP. Before I upgraded to 2.8, this was possible, but now it seems not. I'm on 2.8.4 using OSX Mavericks on a Macbook Pro.
I'm a terrible speller and since GIMP doesn't support spell check, this was always my workaround.
when I go to edit a text in my drawing using dd edit. The text I want to edit is Italic T, but when I start typing it automatically changes to Txt. font. So every time when I'm done typing I have to highlight everything I typed and change the font manually. On an older computer I had I never had to do this.
View 0 Replies View RelatedRegarding the fuzzy, faded out text in the C3D Text Component Editor. (See this link) [URL] ....
Does really run Win7 with Clear Type Text disabled? We've tried that and with that disabled, everything else in Windows worse. I wish they would just fix this dialog in C3D.
A fellow cagemate is having some trouble with his Text Editor and I swore I'd (Cadtutor) solve it for him.the top is of the Text Editor as it usually is with the width adjustment ruler on top, the bottom image is taken from his ACAD which as you can see does not have this ruler. This happened yesterday and we have not managed to restore it back to how it was.Has he turned it off somewhere? How can he get it back?
View 7 Replies View RelatedI have lots of MTEXT on a single layer which has the Bylayer colour Red but all the MTEXT is showing as Yellow. When you double-click one of the MTEXT letters it opens the MTEXT editor and I can see that the text has been manually set to Yellow in the ‘Text Editor Colour Gallery’.
Is it possible to change all the text back to Bylayer?
I have already tried using the 'SETBYLAYER' command but this hasn’t worked.
I'm using AutoCAD 2012.
Is it possible to modify .DXE files with a text editor?
I want to quickly find & replace the file paths DXE's are looking for (rather than run eattext every time I have a new drawing), but after opening in Notepad or Word AutoCAD displays error "...not valid extraction file."
BLK's were nice because files could be renamed and the schedule would still work. Now, the DXE will look for the old drawing rather than the one which has been renamed. Copying a file or using a template is impossible because you have to run eattext & create a new DXE every time the file name changes.
i have a drawing boarder block, which I need to edit some of the text.
When I open it up in the Block Editor and click on some of the text, I get a pop up with the fields in. When I change a value and close, it is reflected in the block. All normal.
However, with another text field, when I click it, it wont select, but just selects the other block of text. Of the three blocks I have, I can only edit one of them.
The strange thing is, if I am in the normal layout view, and double click the problem text I then get the pop up with all the fields and their values. Only when I change one of them it is not reflected on the viewpoint.
I got a problem in my .dwg drawing. When I go to Block Editor of my drawing , I get some unexpected text like below screeshot (red marked) which disturb my afterwards activities. How can I make them off?
View 2 Replies View RelatedText Component Editor dialog box not working. URL....Here is an example.I can't modify Label text from Sections and pretty much everything in this area.I think everything happens because of the Country Kit I have installed.Is there any way to repair it? I have all service packs installed on CIVIL 3D 2012.
Here is the error i get: Cannot find the resource string number 25202 in resource - 551157760
I think the problem is coming from Country Kit. Since I put it and I'm using it as a template, my Civil 3D is coming with THOUSANDS of errors.
I need a command line based text editor for scripts. Textedit wants to use an in place editor. Switching DTEXTED does not make a difference.
LT, C3D 2005 - 2014
XP, Vista, 7
Within the enhanced attribute editor dialogue, I am wondering if there is a way to open up the multiline text editor with a keyboard shortcut, vs.. having to mouse click on the open editor box? The reason being, I can quickly fill out attributes that are single line text, but get hemmed up with having to stop and open up the multiline....
View 3 Replies View RelatedI just learn about dynamic block. How to edit text inside dynamic block without using block editor. I want directly edit text inside.
View 1 Replies View Related1. when I edit or create text in a particualr drawing, I can't keep the editor from rotating 90 degrees.
I've tried creating a new style and it does the same thing both in model space and in Paper Space.
2. in a new drawing, the editor jumps out of drawing area on right side of drawing space by default.
I'm searching an external RTF-Editor which is quicker then "MS Word" and better then the internal editor. Some applications use this RTF-modules.
Can one of these used by Autocad?
We've just started using an attribute in a dynamic block and I'm curious if there is a faster way to edit the text, like how you just click outside the dtext or mtext editor to save and exit. the editor.
We only need to edit the value field, not any of the other attritubes. I really like how the dynamic block is saving us some time, but the outdated editor is really irritating, and it's not always convenient to hit Tab then Enter on the keyboard.
Is there perhaps an alternate editor, or a way I can edit the value text in the mtext editor by default rather than opening up the Enhanced Attribute Editor?
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
I lost the ruler to adjust the width and length of mtext objects in the editor settings.
How can I get this ruler back?
I have Autodesk Inventor 2011 and I cannot open the VBA Editor. I have tried to reinstall inventor and that has not worked. I have already looked at this thread and tried some of the solutions but none of them have worked. The Inventor32bitHost.exe starts up and then closes once I click the button. I have Windows 64-bit professional.
View 1 Replies View RelatedI will start to explain what I want. I want to place an iLogic component in an assembly. When I place the component a window should appear where I can enter some dimensions. That's it basically.
I have created a user form in VBA. With two fields for dimensions, an OK and Cancel button. There is no code behind it because I don't know what to place. The code in the form should send the filled in value to the user parameter in the model. e.g. "width: 50mm" to WIDTH.
I have an iLogic component with its parameters.
I have IV 2011. And studied the iLogic examples. But the part where I'm interested in is hidden in the .dll file which is used for reference.
In the styles my template drawing is set to Standard ANSI, then below are a bunch of styles like Dim and center mark etc.I want to change the precision of my template so that when I bring in a part to the drawing and dimension it. it is at a 3 place decimal.
View 1 Replies View RelatedI have a big PSD file that I need to export to .PNG. It has a lot of texts inside and I need to edit them very fast and possible without loading the PSD file since it will eat my memory.
So, Simple text editor of a PSD without loading the PSD and auto save to .PNG with the same name in same directory.