way to define a path for a part to move in an assembly?
Find attaced models for valve, pig and assembly.
the final goal is to deturnime the maximum size pig that will travel thru with out interfering.
I believe the path for the leading end will be different than the trailing end.
I'm trying to make an assembly that would move. however I'm having trouble right now, when i try to move things by mouse, it seems they just go everywhere without respecting the constraints. At first i was using the drive constraint on the slider delete for the movement but it doesn't work either.
I am using inventor 2011 btw. Here are the files, assemblage.iam was working correctly but when i added the arms, they don't work ( assemblage2.iam).
When I rotate the drive shaft gear very slowly, the assembly follows the the correct motion path, (figure 1), however, when I rotate it quickly, the assembly snaps the linkages to an orientation that is not physically possible, but satisfies the geometrical constraints (figure 2). I can't use contact solver because I am using the adaptive function for my sub-assembly to avoid having to re-constrain many parts.
View 1 Replies View RelatedI have a damper, I started it with the bottom frame member, which was grounded at origins when it was placed and I built the rest of the damper from there. All my constraints for blades and linkages and all related parts were able to move (with the damper held in place in "space" by the grounded frame member.
For parts list purposes I need all 4 sides of the frame to be one BOM item so I demoted the 4 frame pieces as one inseparable assembly.
After that all motion is lost in the main assembly and I can drag it all over "space" since I lost the bottom frame member ground point. I can ground the demoted frame assembly to lock it down, and drive the constraints to make the damper parts move to create positional representations.
I guess I'm just wondering if I'm not really supposed to be able to "move" components arbitrarily and I should just be driving the constraints all the time in the first place...I'm just not sure why the motion is lost after the initial ground point is lost.
I'm having trouble with a tangent constraint. I have an adaptive part in an assembly and it is a revolution. I am able to constrain the top and bottom of the part so that it expands and contracts with my assembly. But, when I go to constrain the sides of my part via the tangent constraint I get an "inconsistent constraint" error.
View 6 Replies View RelatedConcerning Inventor 2012...
We do a good bit of deriving parts from assemblies. We have a workflow that works well for us, we create PARTS, put them in an ASSEMBLY, then create new PARTS DERIVED from ASSEMBLY. We use Boolean to add/subtract and disregard parts as needed to create these parts. These parts are now given color and reassembled in an yet another final ASSEMBLY as needed and put into a drawing.
Through Inventor 2011 this worked well.
In Inventor 2012 the color is disapering as soon as any change is made on a source part.
1 Changing the color does not work.
2 In the derived from Assembly, opening up (in the browser) the individual .ipt's and right clicking and clicking properties and changing the color only stays until the next change to the source prt.
3 Changing EACH individual face by right click, properties and setting the FACE PROPERTIES from "as feature" to "as part" does work, but is ridiculous to change hundreds of faces on each part. (especially considering we did NOT need this step in 2011)
Is there a switch in the registry (to turn off the standard “as feature” to the parts face).
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
I would like to determine the Proxy ObjectType returned from Constraint.EntityOne (i.e. If oConst.EntityOne = kWorkPointProxyObject Then ....)
Property EntityOne() As IDispatch**
how IDispatch works.
Dim oAsmDef As AssemblyComponentDefinitionSet oAsmDef = oAsmDoc.ComponentDefinition
Dim oConst As AssemblyConstraint
For Each oConst In oAsmDef.Constraints'Below will print the Enum 67120288 (kEdgeProxyObject) or 67119520 (kFaceProxyObject) if
'it is constrained. It will Err if a Work or Sketch Proxy Object is Constrained Debug.Print oConst.EntityOne Debug.Print oConst.EntityTwo Next
I have just installed Inventor 2012 and am experiencing a bizarre problem with placing content center parts. When I start a new assembly, and place a content center part, I would expect it to locate itself central to the assembly origin. What actually happens is that it grounds itself wherever I click on the screen. This doesn't happen with parts that I have created myself.
Is there a bug in the system or maybe an option that I have unknowingly switched off?
Inventor Professional 2012 SP1
Windows XP Pro 64 Edition SP2
Having problems with parts lists not showing the correct part numbers of the parts included in the assembly. In some cases I've made a new part by renaming an existing part but when I create a parts list it shows the part no of the original existing part used to create the new part, even though the new part is the one in the assembly. Also I have just had a number of similar assemblies and needed to produce parts lists for them. I created the first one and then used 'save as' to rename the drawing including the parts list. Then when I re-opened the newly renamed drawing I assigned it to it's new assembly. However the parts list did not update to show the new part numbers included in it's new assembly.
Is all this a glitch in the system or is there something in the set-up which is causing this problem?
I have a dynamic path for mac osx:
var progressbaricon = File(app.path+'/Presets.localized/' + app.locale + '/Scripts/idatabase/Images/For_the_birds/progressbar.png');
Now i want to create the same path for windows
how to record a clip while I'm moving any of my 3d solid draw.
View 0 Replies View RelatedIm trying to define a custom shape from a path but its greyed out on the edit menu, i've read that you simply select the path with the path selection tool and then edit>define custom shape but no luck..
Im using cs
I was hoping to define a tree of (smart) collections to match my folders tree, but coming up with a search criteria to match the folder path is proving difficult at best, impossible at worst.
Ultimately this smart collection criteria is bound for a plugin, but it's the same problem regardless of how ya do it...
I've created a motion path animation. In preview everything works well, I then go to create a AVI/WMV file and it builds the video without any problem. When you view the video it always stops in the same place (about 6 seconds in) but the video keeps running for the full duration of 30seconds.
I've tried this several times with different settings but always the same outcome.
I've got a Locator attached to a Curve with a Motion Path - the Motion Path is animated so the Locator moves nicely along the Curve. I now want to swap the original Curve with a new one and have the Locator follow it instead.
Is there a way to simply switch curves and tell the Motion Path to use a new Curve while keeping the animated keys in the Motion Path node?
I've tried playing around with the connection editor but cant manage to connect the new Curve to the Motion Path nodes "geometryPath"
I'm currently working on a advertisement for a client and I need to creat a kind of ribbon to wrap around like a present. I thought what would be best would be making the ribbon and then using a motion path add it on but also I would add a gravity field to the ribbon so to moved more like a ribbon.
Also with the motion path I have made them and connected my ribbon and for some reason it doesn't move until the last frame and just snaps to that position?
To create an animation similar to the one shown in the page 225, in the tutorial, I created a curve but I am not too sure that was the correct way to create it.
1. Selected the Surfaces Menu.
2. In the font view, using the CV Curve Tool, created the first half.
3. Using Duplicate in the Edit Menu, I created the other half.
4. In the Edit Curves Menu, selected Attach Curves and connected two curves.
5. I, then selected the Animation Menu and created an object to be used as an aircraft and followed the same steps shown in the tutorial and it worked nicely.
I am trying to attach an object to a motion path but when i do the object goes to the beginning of the path but when i move the time slider nothing happens and when i move the object it isn't attached to the path.
View 8 Replies View RelatedI'm trying to model a cable. I do it with cylinder and EP Curve. I want to set an object motion and Object Flow Path.
I fallow also tutorial but still getting weird result.
My cylinder doesnt fallow the curve along. See attached img.
I set my motion object to normal...also the axis are set so the cylinder moves along curve on time slider good. But when I set Flow Path (latice) the object fallows the curve just with other end.
I was wondering if you could draw a motion path for objects to follow. I have multiple objects(12) that all need to follow on the same path. Do I have to animate all of them individually, or can I draw a path? These objects are NOT masks. They are text imported from Illustrator(CS6).
If Microsoft Powerpoint can do it, then surely Adobe can...
I need to apply the very same motion path to multiple objects. Is there a way to copy the motion path from a symbol to another? I can't find a way to do this.
View 1 Replies View Relateda few things involving cameras. My assignment was to use our plane that we modeled with poly's and animate it on a motion path(used cv curve tool) and have a camera above it follow it. Now I got that down perfect.
But what I don't have a clue on, is how do I attach a camera on the same motion path as the plane and have a camera angle right behind the spinning propeller? Like a cockpit view.
My after effects is not showing the full bezier curve. The star is supposed to bounce from upper left to upper right.The curve is cropped. How to adjust this?
View 1 Replies View RelatedI have an animate file that contains many animations and one motion path animation. All animation elements of the animate file are responsive with the exception of the motion path animation which is not for some reason. Why does the motion path animation not repsonsive even though it is L, T, W, H coordinates are set as percentages?
View 4 Replies View RelatedI'm trying to assign a motion path to the light rays effect on one of my layers but i can't seem to find a way to do it and google has turned up nothing. the problem is the effect needs to be on a certain layer in order to make the effect look right but i don't want the layer to move i only want to affect the centre point of the effect. i can assign key frames and animate it to move in straight lines but i need it to move in a curve and there seems to be no way to alter the motion path or assign it to one on a null layer.
View 3 Replies View RelatedHow do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
Is there a way to keep the clone stamp's initial position and then add the path onto it?I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.
Any way to evenly distribute Locators on a motion path along a nurbs circle? Its for a mouth/lips rig. and I need it to be symmetrical with out manually inputting values.
View 2 Replies View Relatedi have been using the drivenTime node to create walkcycles that follow motion path curves where the out time is connected to some attribute via a unitToTimeCOnversion node.in previous version of Maya.
When i try to connect anything to the Out Time of new drivenTime node the connection never works, not even keyframes?
is there a fix or workaround for this?
I want to make a vector shape from a path. Is there a way to bypass having to define a new custom shape? I just want to quickly add the vector shape to a new layer, but I don't need it defined as it'll just be used once.
View 5 Replies View RelatedYou can define a MiniToolBarTextEditor...
Private WithEvents m_text As MiniToolbarTextEditor
but later, when you create the MiniToolBar, on the controls there is no AddTextEditor...????
Dim miniControls As MiniToolbarControls = m_MiniToolbar.Controls
m_text = minicontrol.add HERE SHOULD BE THE TEXT EDITOR... I can add anything else! where is the text editor.
I tried the value editor, but it cannot take text!
I have an assembly which serves as a configurator. This Assy, needs to be copied many times. The assy contains 2 parts, which also must be copied. but when copied, the parts must have a new filename, and then the Rule cannot find them anymore. Therefore my plan is to define the filename with the configurator rule..
Example.:
Assy = Module.iam
Part1 = Module-1.ipt
Part2 = Module-2.ipt
I have this so far, but is doesn't work.. what do i put before the .ipt??
Filename = ThisDoc.FileName(False) 'without extension[Filname-1 inserted here].ipt.Diameter = "30"