After Effects :: How To Show Full Bezier Curve In Motion Path
Dec 3, 2013My after effects is not showing the full bezier curve. The star is supposed to bounce from upper left to upper right.The curve is cropped. How to adjust this?
View 1 Replies
ADVERTISEMENT
Maya Animation :: How To Curve With Motion Path
Jan 9, 2013I've got a Locator attached to a Curve with a Motion Path - the Motion Path is animated so the Locator moves nicely along the Curve. I now want to swap the original Curve with a new one and have the Locator follow it instead.
Is there a way to simply switch curves and tell the Motion Path to use a new Curve while keeping the animated keys in the Motion Path node?
I've tried playing around with the connection editor but cant manage to connect the new Curve to the Motion Path nodes "geometryPath"
After Effects :: How To Draw A Motion Path For Objects To Follow
Feb 5, 2014I was wondering if you could draw a motion path for objects to follow. I have multiple objects(12) that all need to follow on the same path. Do I have to animate all of them individually, or can I draw a path? These objects are NOT masks. They are text imported from Illustrator(CS6).
If Microsoft Powerpoint can do it, then surely Adobe can...
After Effects :: How To Assign A Motion Path To The Light Rays Effect
Jul 3, 2013I'm trying to assign a motion path to the light rays effect on one of my layers but i can't seem to find a way to do it and google has turned up nothing. the problem is the effect needs to be on a certain layer in order to make the effect look right but i don't want the layer to move i only want to affect the centre point of the effect. i can assign key frames and animate it to move in straight lines but i need it to move in a curve and there seems to be no way to alter the motion path or assign it to one on a null layer.
View 3 Replies View RelatedAfter Effects :: Add Motion Path Of A Tracking Point To Separate Clone Stamp?
Sep 23, 2013How do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
Is there a way to keep the clone stamp's initial position and then add the path onto it?I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.
AutoCAD 2010 :: Xref / Show Full Name (path And All) At The Top Of DWG?
Mar 14, 2013how do I show the full name (path and all) at the top of the Acad dwg?
View 3 Replies View RelatedPaint.NET :: How To Make A Bezier Curve
Aug 2, 2011I've read on the internet that to make a Bézier curve, you are supposed to right click, i believe? It says to press the right mouse button. When I right click, however, it just makes another cubic spline line of secondary color.
View 1 Replies View RelatedMaya :: Import Bezier Curve From PSD
Feb 15, 2014I have created a test bezier curve in Adobe Photoshop, saved it as a .ai file for import into Maya, and imported the curve successfully. However when I try to revolve it to create a sculpture, it revolves around a pivot point which is in the middle of the scene. Is this error because of the .ai file format? I don't have Illustrator as such, just using a .ai export from PSD so I can use PSD which I know better - to get the curve in the first place. Is there a way to look at the curve in an editor of some sort and precicesly locate the pivor point, reset it etc? The file is also not yet in a default project, as I'm just testing first. I am a rank beginner, having used Maya for 4 months, 8 years ago, and now need to learn the program for work.
Additional notes: I did get the revolve to work by manually moving the pivot point but it wasn't very precise, and I'd like to know how to do this ahead of time as I have to make quite a lot of these...
Paint.NET :: Bezier Curve - Keep Several Lines Selected In Separate Layers Apart From Each Other
May 10, 2013I've been wondering, is there some trick to starting 2 Bezier lines at the same start- and end-points? Or do I have to eyeball it? Can I reactivate an old, previously selected line after something else has been selected? Is it possible to keep several lines selected in separate layers apart from each other?
View 1 Replies View RelatedPhotoshop :: Closing Path Now Loses Bezier Handle?
Oct 15, 2013Using Photoshop CC 14.1.2 I notice that I no longer see the vector control handle when I close a path. I hope this is a bug, and not an intended UI change. Visualizing the control wing is an important feature for accuracy etc.
While on the subject of lost functionality, in earlier PS versions when a fill layer was created, the alpha mask was active by default. This allowed for immediate alteration of the mask. Now the default is to have the fill active, which makes less sense as the fill is mostly intended to not be edited directly. Sounds like a quible, but in a fast production setting, this adds an unnecessary step, which did not exist in an earlier iteration.
Also, many generations ago, (in a distant century) there was a "turn off path" button -which could be given a keyboard shortcut via actions. Could never understand why this disappeared. Now, turning off a pth requires that the pen tool be selected & hit ESC or to click into a blank area in the path pallette -which may not exist when many paths have been created. I see there is now a keyboard shortcut for this, but it is buried in the key commands list. So much easier to have that little button (and custom key option) Again, is a busy prodcution workflow, this is a speedbump.
AutoCAD 2010 :: Change Xref From Full Path To Relative Path?
Jul 11, 2012I have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedAutoCad :: Change Xref From Saved (full Path) To Relative Path?
Aug 31, 2012Is there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedAutoCAD 2010 :: Converting Xrefs With Relative Path To Full Path?
Nov 12, 2012I have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedMaya :: Create Editable Motion Trail (smooth Curve)?
Oct 8, 2011Can I somehow smooth create editable motion trail curve? And why it is often that undo not working correctly, it is not updating in viewport and also if I left click and check show in and out tangent's they are not showing.
Maya 2012 SP1 WIN 7
After Effects :: Can't See Motion Paths
May 21, 2011Motion Paths won't display. I'm using the latest updates for AE CS5 and nVidia. Motion Paths have never been visible in AE CS5 all the way back to nVidia driver version 178.x, in fact.
View 11 Replies View RelatedMaya Animation :: Motion Path - Best Way To Animate?
Sep 9, 2013I'm currently working on a advertisement for a client and I need to creat a kind of ribbon to wrap around like a present. I thought what would be best would be making the ribbon and then using a motion path add it on but also I would add a gravity field to the ribbon so to moved more like a ribbon.
Also with the motion path I have made them and connected my ribbon and for some reason it doesn't move until the last frame and just snaps to that position?
AutoCad :: Create Motion Path Animations?
Sep 21, 2011how to record a clip while I'm moving any of my 3d solid draw.
View 0 Replies View RelatedAfter Effects :: Where Is Pixel Motion Blur In CS6
Sep 25, 2013Where is the Pixel Motion Blur in AE CS6? When I type Pixel Motion Blur in the Effects Search, nothing comes up.
View 1 Replies View RelatedMaya Animation :: How To Create Motion Path Correctly
Jan 29, 2011To create an animation similar to the one shown in the page 225, in the tutorial, I created a curve but I am not too sure that was the correct way to create it.
1. Selected the Surfaces Menu.
2. In the font view, using the CV Curve Tool, created the first half.
3. Using Duplicate in the Edit Menu, I created the other half.
4. In the Edit Curves Menu, selected Attach Curves and connected two curves.
5. I, then selected the Animation Menu and created an object to be used as an aircraft and followed the same steps shown in the tutorial and it worked nicely.
Maya Animation :: How To Attach Object To Motion Path
May 13, 2009I am trying to attach an object to a motion path but when i do the object goes to the beginning of the path but when i move the time slider nothing happens and when i move the object it isn't attached to the path.
View 8 Replies View RelatedMaya Modeling :: Set Object Motion And Flow Path?
Oct 6, 2011I'm trying to model a cable. I do it with cylinder and EP Curve. I want to set an object motion and Object Flow Path.
I fallow also tutorial but still getting weird result.
My cylinder doesnt fallow the curve along. See attached img.
I set my motion object to normal...also the axis are set so the cylinder moves along curve on time slider good. But when I set Flow Path (latice) the object fallows the curve just with other end.
Edge Animate CC :: Copy Motion Path From Other Symbols?
Oct 4, 2013I need to apply the very same motion path to multiple objects. Is there a way to copy the motion path from a symbol to another? I can't find a way to do this.
View 1 Replies View RelatedVideoStudio :: X6 - Adding Effects To Motion Tracks?
Apr 23, 2013I have a clip where I have tracked the motion of two eyes (not the eyemovement, but the location). The tracking is awesome by the way. The placeholders are following the movement very good. My goal is to have some kind of effect on the eyes (scary, sci-fi etc), like lens flare coming out of them. But I can't figure out how to add this effect to the motion I have tracked. I have tried adding the effect to the place holders, but it looks very ugly and they are still just a couple of squares.
how I can add an effect to a motion track like this..?
After Effects :: Exporting Motion Tracking (Becomes Out Of Position)
Mar 19, 2014I am motion tracking a logo out of my clip by using simple motion tracking. The shot is a bit shakey but the tracker does a pretty good job, then afterwards to be certian I am going through frame by frame to ensure the entire logo is blurred out. (Its fairly big). And doing minor adjustments if need be.
After rendering the clip in my composition window and watching it, its plays through nicely, exacly how I want it.
The I hit (Command M) to "Make Movie" and render my clip out. I use "Best Settings" and render it out, the issue here is that when it is rendering, my blur becomes out of place and does NOT follow the logo like it should be. It jumps around, it dosent completely leave the logo, and jump all over the screen, but it makes the logo clealy visible. But it somewhat follows the logo across the screen in a horizintal matter, but does not stay in place like how the motion tracker/I set it to be.
This is weird to me because I have blurred out several things in the film using the same method already, and for some reason this one is just not working.
I am on MAC OSX 10.9.2
Running Creative Suite CS5
After Effects :: Tracking Motion Picture Disappear?
Sep 5, 2013Everytime I´m near finishing my project the image that should be tracking motion disappear.
I have a clip, and then I want to paste a picture into it that have a moving mouth. I think I'm on the right track
AutoCAD Inventor :: Nut And Bolt Constrained To Allow / Show Motion?
Oct 16, 2013I'm trying to constrain a length of ACME threaded rod to a nut so that when the rod is spun or threaded it shows it traveling into the nut as it will be grounded. I would like it to work as a driven assembly or if I was to turn or spin the rod by the mouse. I've reseached this for the last 2 days and can not spend any more time on it so time to ask the experts.
View 4 Replies View RelatedAutoCAD Inventor :: Animate Slides To Show Motion
Aug 18, 2009I am trying to animate a couple slides in to show their motion. I setup each different position in a positional rep in my iam. They work correctly. Next I went to Studio and created an animation that went from one PR to the next. I am using the sequence like PR "A" to "B", then PR "B" to "C", then PR "C" to "D".
The trouble is in studio it does not work like it does in the assembly. Watch both videos to see what I mean. It is difficult to explain without being lengthy.
The video shown here is what I am trying to show in Studio. See the reply to this message to see my clip taken from Studio.
AutoCAD Inventor :: Define Path For Motion In Assembly 2012
Apr 18, 2012way to define a path for a part to move in an assembly?
Find attaced models for valve, pig and assembly.
the final goal is to deturnime the maximum size pig that will travel thru with out interfering.
I believe the path for the leading end will be different than the trailing end.
AutoCAD Express Tools :: Created A Motion Path Animation
Apr 29, 2013I've created a motion path animation. In preview everything works well, I then go to create a AVI/WMV file and it builds the video without any problem. When you view the video it always stops in the same place (about 6 seconds in) but the video keeps running for the full duration of 30seconds.
I've tried this several times with different settings but always the same outcome.
Maya Animation :: How To Attach Camera On Same Motion Path As Plane
Oct 10, 2011a few things involving cameras. My assignment was to use our plane that we modeled with poly's and animate it on a motion path(used cv curve tool) and have a camera above it follow it. Now I got that down perfect.
But what I don't have a clue on, is how do I attach a camera on the same motion path as the plane and have a camera angle right behind the spinning propeller? Like a cockpit view.
Edge Animate CC :: How To Create Responsive Motion Path Animation
Dec 13, 2013I have an animate file that contains many animations and one motion path animation. All animation elements of the animate file are responsive with the exception of the motion path animation which is not for some reason. Why does the motion path animation not repsonsive even though it is L, T, W, H coordinates are set as percentages?
View 4 Replies View Related