when I go to edit a text in my drawing using dd edit. The text I want to edit is Italic T, but when I start typing it automatically changes to Txt. font. So every time when I'm done typing I have to highlight everything I typed and change the font manually. On an older computer I had I never had to do this.
View 0 Replies
I need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies View RelatedI need to convert single-line text into multi-line text (AutoCAD LT 2009). Will this version allow you to do so?
View 2 Replies View RelatedI know that there was a command that would convert single line text to multi-line text but I can not find it. It use to be tt2mt or something like that.
I can not find this command in the help either. Did they get rid of this command like zoom center?
how to take multiple single line text and add them together into one multi-line text?
We have an employee in our office that is kind of old school in some ways. That person has a habit of exploding everything possible in a drawing. Most of us create notations using mtext so it's easy to edit and manipulate. Is there a way to convert the single line text back to multiline after it's exploded?
View 9 Replies View RelatedI have multi line text i want to break in one text suppose i have 3 word in multi line text
so i want to break separate like i-love-you as well
I use a lot of Multiline text, copy and paste that text to other areas of the floor plans that I draw, then edit the text. My problem is when I select the text for editing my cursors always appears in a different location other than Align left.
View 4 Replies View RelatedI am using AutoCad 2009 and I have a problem with the panel titles staying where I can access them. Example: the Format panel will appear at certain times, but I cannot find out how to access the function where they stay put all the time.
View 1 Replies View Relatedwe have several columns of multiline text and draw a line to the left of each column. problem is when the text increases or decreases the number of rows the line does not change. is there a way to have this line dynamically change as the number of rows change? or is there a way to snap a line on the imaginary box around the text?
View 4 Replies View RelatedI have a couple of different files that I'm working on that I want a particular text box left-justified. I will get it left-justified and save the file, but the next time the file is opened the text is centered.
View 2 Replies View RelatedI've been running AutoCAD 2006 since it came out and have been running it on Windows 7 since it came out. I've never had any problem runnning my LT version. Today, all of a sudden I cannot type text in the multi-tex box. The cursor moves in the box but nothing is shown. I click okay but cannot select anything. It's like the cursor is moving but not laying down text. I've changed the different fonts, colors and even changed my background from Black to While and still cannot see any text.
My single line text tool continues to work just not the multi-line text box.
I also tried restarting my computer and tried opening existing files. The multi-line box problem occurs on other files to.
We are using inventor 2011 and I would like to make the text wrap where I want it to not where the cell length determines. Can I do this in the ipropeties of the part? When I edit the parts list to move wrap the text manually the text turns blue of course, but this also negates the updating of parts automatically. In the part I use an expression to ensure that the description reverts back to the iproperties of the part ie =<G_L> X <G_W> - <MATERIAL>. I would like it to insert a text wrap then proceed to the next line with <STOCKNUMBER> - <PARTNUMBER> so I would look like:
12" X 6" - G40.21-44W
PL. 1/2 - PL-100
I required a lisp for sorting Multiline text in alphabetic order. (Ascending and Descending)
For example in my drawing it contains lot of Mtexts having multi rows. I need to sort texts inside Mtext. Like PDC-012, DAG-012, AAG-096. I need that Mtext should be AAG-096,DAG-012,PDC-012.
I need a command line based text editor for scripts. Textedit wants to use an in place editor. Switching DTEXTED does not make a difference.
LT, C3D 2005 - 2014
XP, Vista, 7
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
Design 2012 and 2013 has been giving me problems in the material editor.
System Specs:
Win 7 Pro 64
AMD FX-8320 Black Edition
16GB Ram
GTX 660 GPU
Sabertooth 990FX
Max Design 2013 R6
Nitrous
Basically, when i add a sub-object to a slot in the material editor (Using Mental Ray)nothing happens right away, so I have to do it again to get it to show up in the material editor. When i do get it to show up the slot looks all wrong and distorted, everything is unresponsive. I can save the scene and restart Max and everything will be ok, but as soon as i try to add another Multi material to another object it happens again. This was happening also prior to updating to R6 which i did last night. I've read a post about the same thing for 2012 but there was no solution.
I just tried it with Direct3D rather than Nitrous and did not run into this issue (using default Scanline).Just switching to Mental Ray and changing the standard material to MR A&D made the program unresponsive again. I'm starting to think it's MR that is giving me issues. Upon closing Max i get an error message saying that an error occurred and the program will close.Just switched to OpenGL and tried it with MR, still getting the same results.
I have a drawing file in AutoCADMap 3D 2011 consists of some administrative boundaries and city boundaries. Now I have roads of multi line style in the same drawing. When I completed the drawing I noticed there were missing intersections and I wanted all the roads to look something like the drawing shown below.
Please look into the word file thats how I wanted to do intersection in my drawing. Is it possible to do this action in one command or tool.
This is how my drawing looks like. This is how I want the drawing to be.
My question is about the criation of the mulilines using UTM and VBA.
Let's go! I have the next script:
Public Sub LinhaDuplaContinua()
Dim multiLineObj As AcadMLine
Dim Vertices(1 To 36) As Double
Vertices(1) = 547990.632012883
Vertices(2) = 9500776.33954744
[Code]..
This script add a new multi-line in the AUTOCAD.
How I configure that line in the VBA? I need create parallel lines with determinate offset and width.
I need create this type lines in determinate time:
Continuous Double Line:
______________________________
______________________________
Double Right Dashed Line
_______________________________
_ _ _ _ _ _ _ _ _ _ _ _ _
Double Left Dashed Line
_ _ _ _ _ _ _ _ _ _ _ _ _
_______________________________
Double Dashed Line
_ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _
How i configure that in the VBA?
When I manually enter the attribute, it comes up with 3 different data entry options but when I look at the attribute in .NET it shows IsMTextAttribute = FALSE.
What is the best way to set the multiline block attribute?
How to get columns working in a multi line attribute.
I changed system variable ATTIPE (attribute in place editor) to 1 which added the extra formatting options but the columns button is greyed out. As a work around I just use tab stops but columns would be better if possible.
Is it possible to draw an angle (eg 50x50) using the multi line command with the internal & external corners of the multi line angle radius?
View 5 Replies View RelatedHaving issues with multi line attributes in dynamic blocks. On the odd occasion I get the attribute moved for example i use multi line attribute for title block information and sometimes it moves where i don't want it .
View 0 Replies View RelatedI have some my own Icons on my Toolbar in Autocad that prepared by myself,
I can define tooltip for those icons by "Description" property of icons in CUI.
but the limitation is: I will have just single-line and simple tooltips!
so, how can I define multi-line tooltips for my own icons? or even graphical tooltip?!
should I use "Zammel" language?
I want to entmake a block with a multiline attribute. Entmaking the block definition works fine, but what do I code for the Multiline Attribute? Should it be coded (0 . "MTEXT") instead of (0 . "ATTRIB")? I know (101 . "Embedded Object") does not work. What other codes need to be included?
View 2 Replies View RelatedHow to make Multi Leader end line landing or turn 90 degree vertical? I just want to use the leader point to the part and no text at the end of the leader. I guess the only way i know how to do right now is to exploded the M-leader and draw a line vertical down which is not recall proper way . Some people like to use just Leader not Multi leader but i like to use M-leader so i can enter the text in difference line. (See Pic below)
1e.jpg
For labels, is the font decided in the general tab under text style or in the text component editor under the format tab? Are there overrides? There seems to be multiple locations for fonts choices when creating a label and I can't find a nice black and white answer.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I want to load file with database.ReadDwgFile
i dont want use editor (i don't want use CommandFlags.Session)
after the load in the database (see my code for xdb), i want to select all bloc within a closed line entity (within the xdb)
but how to do that whitout editor (editor..SelectWindowPolygon )
here my code for load each file , and mémorize all block for each file
Dim CollDocOuvert As New Collection For Each NomFichier In Fenetre.CollFichier 'recherche et extraction des blocs Dim Fichier As New IO.FileInfo(NomFichier) If Fichier.Exists = True Then GestionAUTOCAD.TxtOnLigneCOmmande("Gestion du
[Code]....
StatusLabelBar is a component of my form for write msg. is use me.refresh and a timer (1s) for refresh my form. (a trick i have found for do this [if you have better trick i take it.])
I work on old radios, and jukeboxes. Remember Vacuum Tubes (Valves)? The schematics when I can get them are not very clear. I try and clean up areas of the schematic I am working on by redrawing the lines, and redoing the text. I try and do the lines in the colors of the wires.For example, If I wanted to draw a wire that was blue with a red stripe, it would look something like the attached image. It would have black outline, and the inside filled with 1 or 2 color (the diagonal strips would be nice, but I could live with straight lines).
If I wanted to draw a white line, it would have black outline, and the inside would be a solid color.Is there a way to accomplish this for the two types of lines that I need to draw?If not, looking for some plugin source code that I could adapt?
The way I used to adjust feature lines was to highlight the node I wanted to adjust and then raise or lower that elevation incrementally until I got to a grade that worked.
Now I've noticed that when I highlight a node and hit the button to raise or lower, it forgets which node I had highlighted after the first press. This is a problem because now I either have to click on the node every time, because if I don't it will raise or lower the elevation of the entire feature line.
How do you start the numbering on multi text from a No. higer than 1?
View 3 Replies View Relatedi want to match properties from one multi text to many others , but i dont want to change the rotation to suite the source ...
View 9 Replies View Related
