I use a lot of Multiline text, copy and paste that text to other areas of the floor plans that I draw, then edit the text. My problem is when I select the text for editing my cursors always appears in a different location other than Align left.
View 4 RepliesI need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies View RelatedI need to convert single-line text into multi-line text (AutoCAD LT 2009). Will this version allow you to do so?
View 2 Replies View RelatedI know that there was a command that would convert single line text to multi-line text but I can not find it. It use to be tt2mt or something like that.
I can not find this command in the help either. Did they get rid of this command like zoom center?
how to take multiple single line text and add them together into one multi-line text?
We have an employee in our office that is kind of old school in some ways. That person has a habit of exploding everything possible in a drawing. Most of us create notations using mtext so it's easy to edit and manipulate. Is there a way to convert the single line text back to multiline after it's exploded?
View 9 Replies View RelatedI have multi line text i want to break in one text suppose i have 3 word in multi line text
so i want to break separate like i-love-you as well
Is there a way to modify the text insertion point of multileaders using lisp? We have a problem with some of our multileaders getting a landing distance set to a negative value. My lisp routine will correct these to a default value, but then the text jumps a bit. If I could get the insertion point prior to changing the landing distance then I could restore that point after changing the landing distance.
;;-------------------------------------------------------------------------------------------------(defun c:zld (/ e th dogleg doglegllength sf ss c mlss mlcount) (setqss (ssget (ssget "X" (list (cons 0 "MULTILEADER"))))DWATxtHgt (getvar "userr1")sf 1dogleg (/ 3 32.0)th (if dwatxthgt dwatxthgt dogleg)c 0mlcount 0mlss (ssadd)) (IF ss (while (< c (sslength ss)) (setq e (vlax-ename->vla-object (ssname ss c)) c (1+ c) ) (= (vla-get-ObjectName e) "AcDbMLeader") (progn;;change the dogleglength if
[code].......
when I go to edit a text in my drawing using dd edit. The text I want to edit is Italic T, but when I start typing it automatically changes to Txt. font. So every time when I'm done typing I have to highlight everything I typed and change the font manually. On an older computer I had I never had to do this.
View 0 Replies View RelatedI am using AutoCad 2009 and I have a problem with the panel titles staying where I can access them. Example: the Format panel will appear at certain times, but I cannot find out how to access the function where they stay put all the time.
View 1 Replies View Relatedwe have several columns of multiline text and draw a line to the left of each column. problem is when the text increases or decreases the number of rows the line does not change. is there a way to have this line dynamically change as the number of rows change? or is there a way to snap a line on the imaginary box around the text?
View 4 Replies View RelatedI have a couple of different files that I'm working on that I want a particular text box left-justified. I will get it left-justified and save the file, but the next time the file is opened the text is centered.
View 2 Replies View RelatedI've been running AutoCAD 2006 since it came out and have been running it on Windows 7 since it came out. I've never had any problem runnning my LT version. Today, all of a sudden I cannot type text in the multi-tex box. The cursor moves in the box but nothing is shown. I click okay but cannot select anything. It's like the cursor is moving but not laying down text. I've changed the different fonts, colors and even changed my background from Black to While and still cannot see any text.
My single line text tool continues to work just not the multi-line text box.
I also tried restarting my computer and tried opening existing files. The multi-line box problem occurs on other files to.
We are using inventor 2011 and I would like to make the text wrap where I want it to not where the cell length determines. Can I do this in the ipropeties of the part? When I edit the parts list to move wrap the text manually the text turns blue of course, but this also negates the updating of parts automatically. In the part I use an expression to ensure that the description reverts back to the iproperties of the part ie =<G_L> X <G_W> - <MATERIAL>. I would like it to insert a text wrap then proceed to the next line with <STOCKNUMBER> - <PARTNUMBER> so I would look like:
12" X 6" - G40.21-44W
PL. 1/2 - PL-100
I required a lisp for sorting Multiline text in alphabetic order. (Ascending and Descending)
For example in my drawing it contains lot of Mtexts having multi rows. I need to sort texts inside Mtext. Like PDC-012, DAG-012, AAG-096. I need that Mtext should be AAG-096,DAG-012,PDC-012.
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
I am creating a brochure in X3 and when I try to edit text in the text box, I can't get to the last line.
The window for editing won't go all the way down. I have tried expanding the window and when I am
expanding it, I can see the bottom line of text but when I let go of the corner it reverts back to showing everything but the bottom line.
I'm having a problem in PS 7 ... every time i start creating/editing text, and i hit the 'enter' button, the text editing mode automatically stops instead of producing a line break and starting a new line.
View 6 Replies View RelatedIn X5, I was able to edit the position of the line for underline text : Thickness and position, up or down in %
The last command for Characters Effect | Underline was « Modified... »
Cannot find it in X6 ! It's not available in the same menu !
I have a multi body part with an extruded cut through all solids. Each solid is derived out to its own part. I edited the extrude feature in the multi body part and removed one solid from the selection set. The cut was correctly deleted from the solid, but when I open the part its still there. The only way to make it update correctly is to manually edit the derive feature in the part. Caught it just before it went off for cutting. 2012 SP2, all hotfixes, win7 64 bit.
View 5 Replies View RelatedDoes VSPx4 support multi cam editing ?
I did visit the product website but could not find any reference to multi cam support.
Is there a way to edit using a multi camera "technique" ? ( having several videos synchronized with an audio track and just switching between the video tracks) or is there some way to do that ?
View 10 Replies View RelatedI have a drawing file in AutoCADMap 3D 2011 consists of some administrative boundaries and city boundaries. Now I have roads of multi line style in the same drawing. When I completed the drawing I noticed there were missing intersections and I wanted all the roads to look something like the drawing shown below.
Please look into the word file thats how I wanted to do intersection in my drawing. Is it possible to do this action in one command or tool.
This is how my drawing looks like. This is how I want the drawing to be.
My question is about the criation of the mulilines using UTM and VBA.
Let's go! I have the next script:
Public Sub LinhaDuplaContinua()
Dim multiLineObj As AcadMLine
Dim Vertices(1 To 36) As Double
Vertices(1) = 547990.632012883
Vertices(2) = 9500776.33954744
[Code]..
This script add a new multi-line in the AUTOCAD.
How I configure that line in the VBA? I need create parallel lines with determinate offset and width.
I need create this type lines in determinate time:
Continuous Double Line:
______________________________
______________________________
Double Right Dashed Line
_______________________________
_ _ _ _ _ _ _ _ _ _ _ _ _
Double Left Dashed Line
_ _ _ _ _ _ _ _ _ _ _ _ _
_______________________________
Double Dashed Line
_ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _
How i configure that in the VBA?
I'm trying to enable multi-sound track editing in Max 2011. I assigned ProSound from the Animation tab of the Preferences dialog, but do not see any changes made to the track view in my window. The help documentation specifies that new tracks would appear under the "World" object in the Track View, but alas, I do not see them there. How to enable that feature?
3DSMax 2011 | Windows 7 Ultimate x64
Apple iMac 27" Bootcamp
Intel Core i7 3.4GHz
16GB RAM
ATI (AMD) Radeon HD 6970M
Coming from a FCP background, and I see this in FCP and in AVID, but I can't seem to do it in premiere, though I really want to. I want a multi monitor set up where the first monitor has my timeline, source window, and project window, then my second monitor has my bins & effects & metadata, then the third will be a full screen of the project window that is still on my first monitor, and then finally a fourth, 65" 4k tv also displaying the project window (mirroring the third monitor). Dragging the project window around and toggling in and out of fullscreen is a waist of time since there was no need to do that with FCP for so many years. I need 3 project windows in premiere (and I dont mean using the reference) , how do I do this with premiere?
View 1 Replies View RelatedWhen I manually enter the attribute, it comes up with 3 different data entry options but when I look at the attribute in .NET it shows IsMTextAttribute = FALSE.
What is the best way to set the multiline block attribute?
I am ready to do some multicamera editing but cannot find my mutilcamera monitor in my window menu?
View 1 Replies View RelatedHow to get columns working in a multi line attribute.
I changed system variable ATTIPE (attribute in place editor) to 1 which added the extra formatting options but the columns button is greyed out. As a work around I just use tab stops but columns would be better if possible.
Is it possible to draw an angle (eg 50x50) using the multi line command with the internal & external corners of the multi line angle radius?
View 5 Replies View RelatedHaving issues with multi line attributes in dynamic blocks. On the odd occasion I get the attribute moved for example i use multi line attribute for title block information and sometimes it moves where i don't want it .
View 0 Replies View RelatedI have some my own Icons on my Toolbar in Autocad that prepared by myself,
I can define tooltip for those icons by "Description" property of icons in CUI.
but the limitation is: I will have just single-line and simple tooltips!
so, how can I define multi-line tooltips for my own icons? or even graphical tooltip?!
should I use "Zammel" language?