Having issues with multi line attributes in dynamic blocks. On the odd occasion I get the attribute moved for example i use multi line attribute for title block information and sometimes it moves where i don't want it .
View 0 RepliesI have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
View 9 Replies View RelatedWe are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
I made a dynamic block with attributes. The block was to be moved using Linear parameter + move action, and then a lookup parameter and action.
The block moves as it is suppose to but the attributes are left behind. How can I get the attributes to move with the dynamic block?
The attribute properties are:
Verify = Yes.
Lock position: Yes or No don't seem to make a difference.
Is this a bug in AutoCAD or is there a solution to this?
I have a multileader with attributed labels in a block, see included png file. The attributes are indicated by the rectangled text. As you can see the block looks fine, but the leader attaches itself to the insertion point of the block. I want the leader to justify automatically left or right, depending on the drag position of the block. One thing I noticed is that if the block contains an odd number of text lines the leader will automatically self justify. An even number of text line produces what I have here.
View 3 Replies View RelatedI would like to change sub block from a visibility after setting it. Here an example of code to get the right visibility, I don't really know how to update a sub block by name or by handle(seems to change inside dynamic block).
Dim Block As AcadBlock
Dim BlockRef As AcadBlockReference
Dim DynEntBlock As AcadEntity
Dim DynObjRefH As IAcadBlockReference
[Code]........
I have dynamic block with visibility states and Lookups. I tried to add attribute (field with block reference property) which suppose to be updated according to Lookup. But it didn't happen Attribute still the same as first lookup props, but if I insert the block(pic1) and select another properties from the list (pic2-3), when open and close the block editor(4) - everything is ok. Is it possible to solve this problem?
View 9 Replies View RelatedI want to entmake a block with a multiline attribute. Entmaking the block definition works fine, but what do I code for the Multiline Attribute? Should it be coded (0 . "MTEXT") instead of (0 . "ATTRIB")? I know (101 . "Embedded Object") does not work. What other codes need to be included?
View 2 Replies View RelatedI have 3 attribute in one block , i made 3 options for visibilty1
so i need in visibilty (1) i can show only the text 11
and i need in visibilty (2) i can show only the text 22
and i need in visibilty (3) i can show only the text 33
I am trying to make a dynamic block with the rotate function and I am having no luck. I have the attributes locked.
When moving the rotate grip the angle changes but the text does not rotate.
I want to rotate my block so that the attribute rotates with it but stays the correct way around so it is still readable and no upside down text. So far I can only rotate the block but the attribute won't rotate with it at all.
Is there a step I have missed out?
I am trying to make a block with text inside in it. I need the text to rotate at 0 no matter what degree I insert the block into my drawing. For example the type of blocks I use are for fire alarm in which need to go onto different sides of the walls so I need a base point in which I can insert the block at but the text to always rotate back at 0.
View 2 Replies View RelatedDynamic block. The visibility states are not working properly and always show the attributes.
View 1 Replies View RelatedI have a Block (elevation of a typ. door) that has attributes on it, Door Number and Room Name. The door needs to be hatched so I put an associative hatch in, which works fine in block editor. When I type different names and numbers the hatch boundaries resize accordingly.
My problem is when I close block editor and reinsert the block (or ATTSYNC) and edit the names and numbers, the hatch does not resize the boundaries of the new text.
I'm trying to get a dynamic block to rotate the attached attributes from a left justification in the vertical position to a center justification in the horizontal position. I managed to do this with 2 Visibility States, but anyway to do this with only the one set of attributes. I'm using AutoCAD 2012.
View 2 Replies View RelatedI am trying to create a dynamic block that represents a cable with an attribute attached. The block is essentially a line that runs along the Y axis. I have created a distance parameter with a stretch action attached. The line is to remain anchored at the top and the bottom end is permitted to stretch.
Problem: I have an attribute inserted to the left side of the line (offset at -2mm TC insertion) at a rotation angle of 270. When I select the stretch grip (in the drawing environment) I would like the attribute to remain centered with the line maintain the offset and maintaining the rotation angle. I have exhausted all of my options (limited experience).
In the past I have not managed to get attributes to constantly behave themselves if I applied a visibility state to them. Following posts by steven-g where he has a method to get them working together I thought I would give it another try. His method was used to link the attributes to a further reference attribute to reveal a field but mine is far simpler, just requiring one of two numbers to appear depending on the project state.
I had two attributes which toggled their visibility but only the primary attribute would display UNTIL AFTER I locked and prest the attributes, wherein it all looks to be working as wanted.
So my question is, why does it now work (and will it continue to do so)?
I don't know if I could get away with only one of those actions but since I had something working I didn't want to break it. I will test it once these drawings have cleared my desk.
I have a couple of attributes suing fields within a block. But they don't update on opening. I need to do a manual field update to get them updated to the latest values.Tried various combinations of "fieldeval", but this was no good.
View 5 Replies View RelatedI "work in both worlds" It's somewhat important. (Windows at my "day job", Mac Student Ed for my University teaching.
I have an Annotative Associative block with attributes (TTFs). The Title attribute is multi-line. When the block used in a file that is opened in Windows, obvkously everything is fine. If that same drawing is opened in ACAD Mac, the position of the top attribute shifts and can't be corrected until the block is edited in Windows. (It has to be Windows because ACADmac can't edit associative blocks in this release.)
Process I used (MacBookPro 7,1):
Start ACAD12win (Parallels 7 w/WinXP), used default ACAD.DWT.inserted block "Tag Drawing Title", accepted all attribute value defaults, accepted default annotation scale of 1:1save fileopened file in ACAD12mac (multi-line attribute in wrong position)save fileOpened again in ACAD12win, and multi-line attribute is still in wrong position. Save fileOpened again in ACAD12mac, and multi-line attribute is in a greater incorrect position.
I have an interior elevation callout block with four arrows, noting the N, S, E, W interior wall elevations. I trick I use to rotate Text while keeping the Text oriented in the upright position is to place a Point Parameter at the center of the text then set the "Chain Actions" to Yes. Then I use the Move Action to tie the text to the Point Parameter. Next step is to use a Rotation Action to select only the Point Parameter, which rotates the Point Parameter and brings the text along with it, keeping the text oriented in the upright reading position always. As an example, think about a viewport tag with a North arrow, and the letter "N" at the arrow tip. When you rotate the arrow, the "N" position rotates with the arrow's point but always is oriented upright.
View 3 Replies View RelatedI have a group of blocks, when I click the blocks I get the editable attribute pop-up box. I can now enter a text of my liking.
I have now made a dynamic block of these blocks, with a visibility states dropdown. So that only one block is shown at a time and when I need to change it I copy the block and use the dropdown button to select the one I need.
The problem I have is that the when I click the blocks from the dropdown only one of them allows me to use the editable attribute pop up window. The others say 'The selected block has no editable attributes'.
If I can't have multiple blocks with editable attributes in one dynamic block or if I can and have done something wrong.
I've attached the block so you can see what I mean. Single Socket allows editable attributes others wont.
I suppose it's a bug, and I wonder how can it be fixed:
If you edit attribute settings in a dynamic block, and put:
Constant: yes
Lock position: no
You can't neither change the position in the Model, nor edit text. I suppose that with this two settings selected the way showed above, one should be able to move the attribute in Model space.
I sent the following message to autodesk:
Issue: Dynamic Block causes crash
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
I want to convert existing lighting blocks with attributes to a new dynamic block. I created a few visibility states but when i insert the block I can't move the attribute text around. I don't have to redefine the attributes within the block editor to make this work. What is the best way to deal with existing blocks with attributes?
View 4 Replies View RelatedI have searched high and low and still could not find a tutorial to really explain how to create a drawing title with attributes (Detail Number, Sheet Number, Detail Title, Detail Scale). All I find are on creating dynamic block, which I could achieve, but I need one for a block that has (or will have) attributes.
I was able to find a tutorial on attributed door numbers, but it does not work for drawing titles that has attributes. GOAL: I would like to have all my seven drawing titles in one file and to be able to stretch the leg of any selected title to a desired length.
I have this Dynamic Block which has a few distance parameters on it and an attribute at beginning of each parameter which are attached to a stretch action. If manually bring the block in. And set a value to attribute and then stretch the it , attribute move along with action. But when I do it pragmatically it doesn't . Basically attribute stays at original location of original block before stretch. What is wrong with my code. Or Shall I do something to Attributes when I change the distance parameters in Program? I don't know .
I have a function which bring the block in and set attribute first and then another call which change the distance . So I don't show the first function which to me works fine . The problem is this part.
For Each myBRP As DynamicBlockReferenceProperty In myBRC
For I = 1 To NumbderOfDistanceParamsinDynBlk
If myBRP.PropertyName = "Distance" & Trim(i.ToString) Then
myBRP.Value = DynDistancevalue(i)
End If
Next
Next
What do I need: In the example I will mark attributes with underlined text, and simple text with bold text
(Position)numberDiamdiam
Diam= diameter symbol
In the model space, I enter values:
Position = 3
number = 15
diam = 12
I need to get:
(3)15Diam12
instead of
(3 )15 Diam12
Is it possible to make an Attribute, take as a "Position X" value, the "Text alignment X" from a text ?
If it is possible to assign multiple attributes to a single line text within a block, and be prompted for them upon insertion.
View 3 Replies View Relatedwe have a rectangle 0,0 - 200,100 with a triangle inside 0,0 - 100,100 - 200,0
[/] <- for example
A dynamic stretch action is applied to the x of the rectangle, how do you scale/stretch the triangle with the rectangle and only on the x axis, so the triangle remains symmetrical from the middle of the rectangle on the y axis even when the rectangle is stretched?
Looking for a solution that doesn't involve inserting the block and scaling?
I have created a library of dynamic blocks in AutoCad10. When I craeted them I could click on the Grip for a Linear Parameter that was associated with a Stretch Action and the current value would be displayed (Example: The width of a block). I could type in a new value and the block would stretch to that value. Something changed this week when I attempted to use my blocks. When I click on the Grip no dimension is displayed. The command line shows "Specify point location or [Base point/Undo/Exit]". I can drag the grip to change my block but I cannot simply type in a new dimension as before.
View 2 Replies View RelatedMy office is trying to create dynamic blocks with dynamic attributes. We have the dynamic blocks created. how to create the attributes
View 3 Replies View Related