AutoCAD 2010 :: Faded Lines - Printing To PDF
Mar 6, 2013
When printing in AutoCAD 2011 when using the "DWG to PDF.pc3" printer, many lines in the resulting PDF are faded while others appear fine. I can zoom in and all the lines appear with the same weight. There are multiple layers on the drawing but all contain the same line weight and lines on the same layer appear with different weights.
This occurs on all AutoCAD files and all users. I have tried changing pin assignments with no success. Printing directly to Adobe PDF does not result in this issue but with each sheet of drawing being a different file this process uses a lot of time.
View 2 Replies
ADVERTISEMENT
Jan 31, 2013
I dont know whats going on, but all of a sudden all the prints i do to PDF have a washed out faded look about them.Now all those lines are on the same layer, set to print with the same pen thickness, so why does one appear bold and one hardly visible at all?
View 9 Replies
View Related
Nov 14, 2013
So I've drawn a 3d model in Autocad 2011 and when I come to print it in either layout or model view I get lines that appear. These lines do not show up in the print preview no do they look like they relate to the model itself, so I can't understand where they are coming from. I have the grid lines turned off and have exhausted everything else I can think of.
See the attached pdf for what I'm talking about.
View 2 Replies
View Related
Apr 9, 2013
Im trying to plot a drawing and the grey lines are printing on top of black. how do I get black to print on top of grey? I am using MEP2013
View 4 Replies
View Related
May 8, 2012
I installed X6 the other day and now and again I notice it prints a faded blue box around a bitmap. I have seen this happen in older versions of acrobat, but not sure why this would happen in X6. I went back to X4 and it prints just fine.
I'm printing to a Xerox Docucolour 252.
View 7 Replies
View Related
Sep 13, 2012
Is there any options for Xref files and/or attributes to screen down or fade down other than changing its color to gray?
View 4 Replies
View Related
Nov 1, 2012
How do you get an xref to appear faded when plotted onto paper?
I tried putting the xref's on their own layer and adjusted the transparency level.
View 1 Replies
View Related
Apr 25, 2012
i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
View 1 Replies
View Related
Apr 23, 2012
I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
View 2 Replies
View Related
Nov 16, 2013
I remember being able to select 'Print Grid' back when I used AutoCAD 2000, but never needed to print the grid lines until about a year ago. AutoCAD and AutoCAD LT cannot do this. It seems only AutoCAD Civil 3D users have this option. Basically I need to print the drawing with a grid on paper and/or a mobile device so a field technician can draw conditions to scale easily and accurately. I realize this must not be in high demand, but there are a number of users who have asked about this. They are told that it is only a 'drawing aid' and they should array their construction lines to print their own grid. This is not a good solution for repetition of printing scaled field drawings, and certainly not 'state of the art' technology. Is this feature removed so we will have to search out the higher priced product? It seems like 'Print Grid' could be easily returned to all AutoCAD. Probably just a system variable that was removed when we weren't looking.
View 3 Replies
View Related
Jan 17, 2013
I have a drawing with a screen and behind it is an xref drawing. When I print it to our KIP plotter the lines and other items behind the screen do not plot.
Here is how it is setup and what I have tried
The Xref itself is on its own layer and all the layers of the xref are set to a color that has thickness of .0138 and a 35% screen.
The hatch resides in the active drawing and is set to a color that is also .0138 thick but at a 20% screen.
The hatch is a DOT hatch at scale 1, but I have also tried it as a solid hatch
Lines merge is on and needs to be on.
I have made sure that the hatch is sent to the back and that there is no overlapping of data from other sources liek a second hatch or the same data in another xref etc.
I also tried setting the xref layers to another color that is .0256 thick with a 35% screen, but the results where the same. If i change the xref layers to a .0138 thick color with 100% screen, they do print over the hatch then.
View 5 Replies
View Related
Feb 23, 2011
I have a drawing that has a xref drawing inserted in it, that has lines still printing when they turned off off in the xref drawing, now I have got around this by selecting not to print in the xref drawing layer manager, but I do not understand why they are still printing if they are turned off ?
View 2 Replies
View Related
Apr 19, 2011
I have been send a dwg of a elevation of a kitchen plans that I want to include into my drawing, everything looks ok in autocad but when I go to print this drawing, non of the lines show up just a few random text boxes but no text, no layers are set to not print so why this is so.
I can not upload the file as its 3.32mb.
View 9 Replies
View Related
Apr 15, 2013
I have PDF files created in AutoCad Arch 2010. When I print them some of the grayscale comes out as random zig-zag line pattern. When I veiw the PDF it looks fine. Images that do this are usually backgrounds of logos or shaded driveways / sidewalks. Some sheets out of a given set will print fine while others do this zig-zag thing?
View 2 Replies
View Related
May 28, 2012
Using Autocad 2000LT with Windows XP and would like to make some lines in the drawing wider and or bolder. how to make certain lines wider so they would stand out from the rest of the drawing.
View 6 Replies
View Related
Dec 16, 2010
When I use the built-in dwg to PDF for publishing multiable layout tabs I somtimes get extra and/or missing lines and objects on the PDF. When in model space no extra lines a present or missing. Everything is where it need to be. Same goes when a review the drawing in layout before I publish to PDF.
When I publish to paper its fine, no problems.
View 9 Replies
View Related
Oct 23, 2012
Have a slight problem with our new HP Designjet 500 printer which has just replaced our previous HP Designjet 500 printer that went bang a few days ago!
Problem is, all the lines or blocks etc within the drawing that are on colour 253 (a grey i use for certain elements of the drawing) are coming out purple when i print the drawing out!?
View 9 Replies
View Related
Apr 25, 2012
I copied some lines with global widths into another drawing and the line is displayed and printed with an outline around the global width of the line in the new drawing.. almost like it is a (3D offset for the global width, and not solid fill)
I have checked my fillmode. "fillmode = 1" and I also checked my UCS "UCS is set to current"
Why is this happening and if it has to do with some inherent properties of that new dwg?
View 3 Replies
View Related
Jan 10, 2013
when printing in view ports, wipeouts don't show. wipeouts are transparent.
ive tried copying the same wipeout lineweights and pasting it in new documents but have no problems there. i've tried re saving under a brand new document but still no luck. apparently it's only happening in the same 2 documents.
View 9 Replies
View Related
Oct 15, 2013
HP Designjet T520 36 inch ePrinter (CQ893A)
Latest HP-Driver: 61.125.1522.100
Latest Firmware: AXP2CN1325AR
Windows 7 64-Bit with AutoCAD MEP 2013 + 2014
we get rasterized diagonal lines when printing from AutoCAD on that Printer in A0 format, straight lines are ok.
Printing FIRST to an PDF printer an THEN to the T520 ist also ok (this is what the customer currently does and the quality is good). Got some suggestions from a local ACAD dealer (max. details in the printer driver) but no success ...
View 7 Replies
View Related
Sep 3, 2012
We are having a print server in which HP DJ Z6200 printer is attached and shared. Nearly 200 users (with Win 7 64bit) are using this plotter. There are few other HP plotters also attached on this print server.
While trying to print any drawing from this HP DJ Z6200 printer, AutoCAD is showing below mentioned error -
None:This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the evice can not be found or the device has a problem. The none plot device has been substituted.
After several googling & digging into the AutoCAD forums I have found that we need to create .PC3 file for this plotter. But while trying to do so, getting the same error message as mentioned. But from the same system, with any other application (MS Word, Excel, Acrobat), we are able to print on the same plotter. After several tryout, we have managed to create a .PC3 file from an Windows XP system. By copying that .PC3 file to affected system, printing is working fine. But its a work around for us as its very difficult to copy-paste .PC3 file for all the users (around 200 or more from different locations).
View 3 Replies
View Related
Oct 19, 2012
I am using 2D-AutoCAD, and trying to plot a drawing on a printer, the drawing is different colors and I want to print it black on white paper, I am unable to select the proper .ctb file from the Plot Style Table pulldown, it does not show up? I have plotted other drawing sets using this method but for some reason cant do it on this particular set.
View 3 Replies
View Related
Apr 3, 2012
So my pluming layer is on and "no plot" is NOT selected, yet when I plot, it does not show up? It was working fine last week and i don't think has been saved since then. Also, the xref prints on other sheets, except this one so i'm thinking there is a difference in the page setup but I dont see any discrepancies.
View 2 Replies
View Related
Jan 20, 2012
I am having an issue printing to scale. When I print my drawings, the scale is about 4" over 100' out of scale (short) All of the settings are correct for plotting. This happens whether we print directly or to a pdf first. I know it is not just the plotter as I have tried three different printers with the same result. Also, I know it is not AutoCad as we are having the same issue printing from Microstation. I
View 9 Replies
View Related
Jun 19, 2012
I have lots of DWG files which I would like to convert to PDF. I guess this is not difficult at all with Scriptpro. However, I would like to know how to: Include in the script file (.SCR) a .CTB file so that the print is made in that way.
Create a Job so that Scriptpro runs once a day over all the .DWG files located in 1 directory. Is all these possible? I can use either Windows XP 32 bit, Windows 7 32bit and Windows 7 64 bit. My version o Autocad Mechanical is 2011.
View 9 Replies
View Related
Nov 7, 2012
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting.
View 6 Replies
View Related
Feb 8, 2012
Actually on one of my draughtsman's computer, when he hits Ctrl + P, he is unable to see DWG to PDF option in the drop down menu, have I fortgot to install some feature because for rest of my draughtsman they all are getting that option.
View 3 Replies
View Related
Jan 29, 2012
I'm trying to print / plot a drawing which has a mixture of 2D plans and 2 3D views. I have the drawing set-up with viewports in paperspace. The objects in one of the 3D views prints perfectly, yet some of the linework from the second 3D view won't print.
View 6 Replies
View Related
Aug 8, 2013
ACAD MEP 2012..Yes all the typical settings are correct.I have a 2-d drawing with 4 viewports, 2 of which will not print Black & White? Thought it might have to do with visual styles but changing them had no effects.
View 3 Replies
View Related
Nov 28, 2012
We are using autocad map 3d 2012. and autocad 2000. when printing an old drawing made in autocad 2000 with version 2012 the bmp files that we inserted are printing pixelated almost like a digital camo would look. if we go back to 2000 they print fine. we are using a canon ipf710 printer/plotter.
View 7 Replies
View Related
May 1, 2012
I reloaded my CAD and now I have a black background in paperspace. This is what I want but I want it to print white while haveing a black backgroud for drawing. How do I do this?
View 3 Replies
View Related
