AutoCAD 2010 :: Printing With HP DJ Z6200
Sep 3, 2012
We are having a print server in which HP DJ Z6200 printer is attached and shared. Nearly 200 users (with Win 7 64bit) are using this plotter. There are few other HP plotters also attached on this print server.
While trying to print any drawing from this HP DJ Z6200 printer, AutoCAD is showing below mentioned error -
None:This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the evice can not be found or the device has a problem. The none plot device has been substituted.
After several googling & digging into the AutoCAD forums I have found that we need to create .PC3 file for this plotter. But while trying to do so, getting the same error message as mentioned. But from the same system, with any other application (MS Word, Excel, Acrobat), we are able to print on the same plotter. After several tryout, we have managed to create a .PC3 file from an Windows XP system. By copying that .PC3 file to affected system, printing is working fine. But its a work around for us as its very difficult to copy-paste .PC3 file for all the users (around 200 or more from different locations).
View 3 Replies
ADVERTISEMENT
Oct 19, 2012
I am using 2D-AutoCAD, and trying to plot a drawing on a printer, the drawing is different colors and I want to print it black on white paper, I am unable to select the proper .ctb file from the Plot Style Table pulldown, it does not show up? I have plotted other drawing sets using this method but for some reason cant do it on this particular set.
View 3 Replies
View Related
Apr 3, 2012
So my pluming layer is on and "no plot" is NOT selected, yet when I plot, it does not show up? It was working fine last week and i don't think has been saved since then. Also, the xref prints on other sheets, except this one so i'm thinking there is a difference in the page setup but I dont see any discrepancies.
View 2 Replies
View Related
Jan 20, 2012
I am having an issue printing to scale. When I print my drawings, the scale is about 4" over 100' out of scale (short) All of the settings are correct for plotting. This happens whether we print directly or to a pdf first. I know it is not just the plotter as I have tried three different printers with the same result. Also, I know it is not AutoCad as we are having the same issue printing from Microstation. I
View 9 Replies
View Related
Jun 19, 2012
I have lots of DWG files which I would like to convert to PDF. I guess this is not difficult at all with Scriptpro. However, I would like to know how to: Include in the script file (.SCR) a .CTB file so that the print is made in that way.
Create a Job so that Scriptpro runs once a day over all the .DWG files located in 1 directory. Is all these possible? I can use either Windows XP 32 bit, Windows 7 32bit and Windows 7 64 bit. My version o Autocad Mechanical is 2011.
View 9 Replies
View Related
Nov 7, 2012
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting.
View 6 Replies
View Related
Feb 8, 2012
Actually on one of my draughtsman's computer, when he hits Ctrl + P, he is unable to see DWG to PDF option in the drop down menu, have I fortgot to install some feature because for rest of my draughtsman they all are getting that option.
View 3 Replies
View Related
Jan 29, 2012
I'm trying to print / plot a drawing which has a mixture of 2D plans and 2 3D views. I have the drawing set-up with viewports in paperspace. The objects in one of the 3D views prints perfectly, yet some of the linework from the second 3D view won't print.
View 6 Replies
View Related
Aug 8, 2013
ACAD MEP 2012..Yes all the typical settings are correct.I have a 2-d drawing with 4 viewports, 2 of which will not print Black & White? Thought it might have to do with visual styles but changing them had no effects.
View 3 Replies
View Related
Nov 28, 2012
We are using autocad map 3d 2012. and autocad 2000. when printing an old drawing made in autocad 2000 with version 2012 the bmp files that we inserted are printing pixelated almost like a digital camo would look. if we go back to 2000 they print fine. we are using a canon ipf710 printer/plotter.
View 7 Replies
View Related
May 1, 2012
I reloaded my CAD and now I have a black background in paperspace. This is what I want but I want it to print white while haveing a black backgroud for drawing. How do I do this?
View 3 Replies
View Related
Feb 5, 2013
I am currently using a laser printer that is reliant on the thickness of lines and objects in my AutoCAD file. I made a plotter tool file, laser.ctb, that is meant to control the default thickness of drawn lines. How do I know whether the .ctb file is being used by the printing interface?
View 1 Replies
View Related
Mar 6, 2013
When printing in AutoCAD 2011 when using the "DWG to PDF.pc3" printer, many lines in the resulting PDF are faded while others appear fine. I can zoom in and all the lines appear with the same weight. There are multiple layers on the drawing but all contain the same line weight and lines on the same layer appear with different weights.
This occurs on all AutoCAD files and all users. I have tried changing pin assignments with no success. Printing directly to Adobe PDF does not result in this issue but with each sheet of drawing being a different file this process uses a lot of time.
View 2 Replies
View Related
Feb 8, 2012
Whenever I try to do a print with a Visual Style of "REALISTIC" I get the following message, the numbers may change but it's always has the same outcome the program crashes and I have to restart the program.
So far, through trial and error it only appears to happen when using "REALISITIC" the other styles do not crash the program, at least not yet.
[Side note: may not of tried everyone yet.]
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
Running AutoCad 2012, with CadPipe 12.5. Printing is being sent to network printers and plotters, doesn't matter which one I send to, it will crash everytime.
View 5 Replies
View Related
Jan 27, 2012
Using AutoCAD 2010, and I'm having problems printing with one dwg, that I've had to copy an Excel Spreadsheet into. The spreadsheet was created with Excel 2007, and has quite a bit of text in it, and I'm trying to print it on an E size sheet, to an HP Designjet 4000. AutoCAD hangs up each time I try to print this, and my computer gets a message indicating that I'm low on disk space, even tho I do have plenty of space. It's like Autocad is taking more resources than it normally should. How I can insert this spreadsheet into AutoCAD and be able to print it? I've inserted the spreadsheet in model space, and the titleblock/border is in paperspace. I've tried printing to pdf and exporting to other formats to see if that will work, but AutoCAD keeps hanging up. Any other AutoCAD dwg works fine to print to the printer. It's just this one file with a spreadsheet inserted into it.
View 5 Replies
View Related
Feb 28, 2013
We are running Autocad 2012 on Windows 7 and printing to an HP5200 via server mapping in three different labs.
Had a similar problem before and changed the printer drivers from Universal back to PCL5. Since Christmas however this problem seems to have come back. We haven't changed anything. Wondering if maybe there were patches or something that affected this?? When we preview or send a print job Autocad just greys out and crashes. I do know that if we configure the computer to print via TCPIP it also works fine but this is not ideal with the number of computers and students we have.
Another thing we seemed to have noticed is that we don't have this problem with all printers but more oddly we noticed that when we change the default template some templates work and some don't.
By default we are set up to use the acadiso template as we are using the metric system - we can't get anything to plot using this. If we start with the standard acad template we do not have this problem. We have tried plotting a simple circle or a more complex drawing with the same result. The sample files plot fine but I'm guessing they were likely not done in metric...
View 4 Replies
View Related
Nov 5, 2012
Using either Universal Document Converter for JPEG, or Adobe Acrobat 9 for PDF, AutoCAD 2011 (suddenly and without warning) started truncating 15~20 character filenames to 3 character filenames when printing.
It used to plot to the complete filename, swapping the JPG or PDF extension for the DWG extension, until last Friday.
View 1 Replies
View Related
Jan 25, 2012
I have underlayed a DWF drawing in AutoCAD and I'm looking for a way to manage the the lineweight while printing.
I have try many settings but the lines from the DWF come out very thin, probably the thiner that AutoCAD is able to provide.
View 6 Replies
View Related
Dec 4, 2012
I've been playing around with the print options for a while here, and can't seem to figure this out. I want to print multiple view ports on one page.
View 7 Replies
View Related
Mar 23, 2012
I'm trying to print out a Layout in Autocad 2012 but the edges of cylinders either go faint or disappear completely.
This happens when using both PDF and normal printers. If I look at the layout in Print Preview all the lines are there in full. Attached is the result of a PDF print.
View 3 Replies
View Related
Apr 25, 2012
So I have all my layouts in paperspace that are exactly how I want printed. The print preview shows everything properly but when printed the top and bottom of the title block does not print- it gets cut off for some reason.
View 6 Replies
View Related
Sep 11, 2013
why the mtext in the blue viewport prints bold (attached) when the rest of the text in an other viewport or paperscape prints fine? You can see this in the plot preview when zoomed far enough out.
This is plaguing many drawings thoughout the company I work for and no one can figure it out. The only work around I have been able to come up with print everything to PDF first and then to the plotter which is a real pain.
View 5 Replies
View Related
Jun 14, 2012
I import PDFs in Drawings and it takes forever to print. PDFs are only 400KB, so not big files.
View 6 Replies
View Related
May 11, 2012
I am printing some drawings with points over an aerial photo. I want the points to print bold but when I increase the lineweight of the layer, they don't print any heavier. They are just AutoCad points and I have pdmode set to 3. What can I do to make these points print bold?
View 8 Replies
View Related
Sep 1, 2011
When a drawing is printed using PLOT the drawing is printed fine. If I batch plot (or publish) it prints all the frozen layers of the xref and also prints the layers as assigned by the XREF drawing and not the new colours I have specified for this drawing.
View 1 Replies
View Related
Nov 14, 2013
So I've drawn a 3d model in Autocad 2011 and when I come to print it in either layout or model view I get lines that appear. These lines do not show up in the print preview no do they look like they relate to the model itself, so I can't understand where they are coming from. I have the grid lines turned off and have exhausted everything else I can think of.
See the attached pdf for what I'm talking about.
View 2 Replies
View Related
Nov 18, 2012
If you review the attached screen shot of a PDF you will see that my Excel spreadsheet object prints very light. This is added to a Paper Space layer that is same layer as the Title Block, which is printing fine. The colorful solid objects are each in their own viewports.
I have set the OLE property "Plot Quality" to "Monochrome", also I have set the "Plot Style Table" to "monochrome.ctb".
To place the spreadsheet table I have Excel open, I select the columns/rows that I want and then Ctrl-C, I flip over to ACAD and Ctrl-V to place the object, I then resize it by dragging its handles. On screen, in ACAD, it looks fine.
I am creating the PDF using "Cute PDF Writer", which does an excellent job creating PDFs from many applications. I don't think it's related to my problem. I have tried ACAD's "DWG To PDF.pc3", but had a similar problem, but worse in other aspects.
View 2 Replies
View Related
Jul 17, 2012
1. Does Autodesk not have their own support through e-mail or telephone?
2. Below is the crash log. Why the program is crashing when printing on a 11x17 paper size?
Problem signature:
Problem Event Name: APPCRASH
Application Name: acadlt.exe
[code]....
If the online privacy statement is not available, please read our privacy statement offline:C:Windowssystem32en-USerofflps.txt.
View 1 Replies
View Related
Feb 16, 2012
I have an issue when using the DWG to PDF plotter built into AutoCAD 2011. It started when I would generate PDFs from AutoCAD and then try printing them to our office printer for a hard copy. I kept getting the "flattening" bar popping up which caused a set of 20 drawings to take 30 mins to print. Where other PDF generators the drawings shoot out of the printer ASAP. And in a busy office likes mine, tying up a printer for that long is kind of frowned upon. But they didn't solve my flattening issue. I tweaked the "Merge Control" as most of the posts mention along with turning off "layers in PDF" as well. My PDFs are still flattening. All my drawings are 2D...no 3D information.
And now I've noticed after changing the "Merge Control" and "Layer Display" in my pc3 file, it is putting black boxes on text that have a background mask...not a wipeout. I know there have been issues in the past with PDFs and wipeouts...but in my case it's the background mask function. I've even tried using a 255,255,255 colour for my background mask colour (instead of my default "background colour") and that didn't work. And the other weird thing is that it's not blacking out all text with background masks. On one drawing it'll be blacked out and in the next, the exact same piece of text will be fine. It's even only blacking out portions of lines of text. Completely random!
View 9 Replies
View Related
May 16, 2012
Is there a way of printing transparent hatches maintaining transparency?
It appears not to work in 2012. How about 2013 which I haven't yet installed?
View 1 Replies
View Related
Feb 3, 2012
How can I print in black and white while using true colors? I've tried the monochrome ctb, monochrome stb, looking for solutions in these forums, etc. The std 255 colors are not a problem. It is only when I use a true color. When I tried the monochrome stb setting, the fill color on my multileaders did not change.
Also, in paperspace, with viewports that had solid objects in them, I used to be able to print and have hidden lines removed without them showing up that way in the viewport. (used 2008 at the time and have jumped from that to 2012)
I seem to remember that the was a variable command that controlled this but I can't remember it.
View 2 Replies
View Related
