So I have all my layouts in paperspace that are exactly how I want printed. The print preview shows everything properly but when printed the top and bottom of the title block does not print- it gets cut off for some reason.
View 6 RepliesI would like to know how I can edit my Title Block at the bottom of my page. I used to be able to select it in the past when opening the new template file. However after I performed drawings in the model window and back to the layout, I cannot click or edit the field anymore. I tried highlighting using my mouse, shifting layers and exploring right click commands but nothing good came up.
Refer to the attachment what I mean. I am running AutoCAD 2013 and I am on the "AutoCAD Classic" theme.
I tried doing a search online and on the forum with keywords such as "edit title", "edit name" but nothing relevant came up.
Capture.jpg
I am trying to create a "title block" I think it's called. I'm not even sure if i'm doing it right. Pretty sure most of the measurements are off (center lines and coordinate system lines and distances...)
View 9 Replies View RelatedWe have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
After creating a pdf.... when printing that pdf at non scale, the edge of the title block gets cut off. how can I fix that in adobe still using non scale format.
View 2 Replies View RelatedI know how to insert title block in a layout tab. i want the title block to be the same block in all the tabs i am using. if i have 10 tabs i would like each layout tab to have the same title block. i will also need properties to where i change the date on the cover sheet, all layout tabs will be changed at the same time.
this also needs to be 1 file and not a base file and xref.
i know this works because i am working in autocad where it is implemented. this was done by an individual before i started at this job.
Ok I was able to build a title of my needs but what I'm not able to do is when I insert it to a new drawing i can't put in new text to the title block like (title, scale, job no., date, approved, check, job and so on) but i'm able to put in add text to the templates on auto desk so how do i get my title block like that.
View 9 Replies View RelatedI already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies View RelatedAC 2012, Win 7 64 Bit..I sent up this template a while ago, and for the life of me, I can't remember how I setup the text in the title block.I had it set so some text would only have to be changed on the first sheet, and the remainder would automatically populate on a regen.
When I tried to duplicate it, in the field dialog box I can't seem to find out how I got the block reference. Field category=Objects, Field names=Object, Object Type=Block reference.
way I can link my AutoCAD title block attributes to excel and make changes in either excel or AutoCAD and then be able to run an update? The attributes would be “REV” “DWG_NO” “TITLE” “LOCATION” “DRAWING_SIZE” and “FILE NAME”.
View 4 Replies View RelatedIs it better to implement the title block of an electrical drawing in the model space or paper space? I have a co worker who implements it in the model space as shown below. On the other hand, I was taught to implement it in the paper space and then bring in the drawing via viewport.
View 1 Replies View RelatedWorking in Autocad 2010, needed to insert my title block into my design, I know how to insert, but I can't get design to work in the middle of title block.
View 3 Replies View RelatedIs it possible to create a 'drawing scale' defined attribute inside my title block when brought into paper space? I tried setting it up using 'plotscale' fieldname with various formats and it keeps coming in as 1" = 1' or 1:1 rather than 1" = 20' because that's what my plot scale is inside paper space but my drawing scale is 20 scale. If I bring the title block in model space, it adjusts, but I don't plot from model space. Surely there's a way to make this automated inside paper space.
Also, I just setup a 'Date' attribute inside my title block today. What's the difference between Date, Saved Date and Plot Date? Will 'Date' update if its in a drawing and opened up a month from now and saved or do i need to take 'Date' out and replace with 'Saved Date' or Plot Date'?.
Right now i am using model space only i didn't use the layout but i want create the A3 layout. And I need to attach our customized title block into the layout, how to make it the A3 lay out size and how to attach the title block into layout ?
View 2 Replies View RelatedI am attempting to attach a title block into a layout. This is my process:
1. Go to Building1 drawing, and go to layout. Without any viewports created, I attach a dwg file named titleblock1.
2. When I specifiy the location and scale, I cannot find the attached drawing.
why can't I attach files larger than 1.5 KB? I can't attach anything useful!
(again): how to create one title block that fits all paper sizes?
In the ArcGIS, the same layout can fit all paper sizes and there is no need to customize the layout for each paper size manually. For example, if the map is set up based on A4 paper size and then needed to be printed in A0 size, then all the lay out elements will be automatically proportionally changed to fit the new paper size.
I’m not sure if there is an equivalent features in the AutoCAD that handle this issue
I have just finished my design and I wanted to insert a title block and annotations with pictures using the paperspace option. I want to print the design out onto A1 Paper (80000mm x 56000mm) to a 1:100 scale.
What I want to know is what is the dashed line, how do I make the paperspace A1 size and a 1:100 scale, as well as wanting to know how to make the title block and add annotations to the design.
One problem I am facing is that any line I do create comes out bold as well as when I zoom into the drawing itself every line is bold. Why is this?
I am trying to create a single layout with title blockandviewport to save as a template for future. Right clicking on the layout tab does not produce the menu.
I create a new layout by selecting page set up manager in the file menu, create a new layout, but the tab does not show up at the bottom.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedHow to convert existing 2d autocad title block into Revit title block template?
View 7 Replies View RelatedAutocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
How do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedIs it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedIs there a way to animate the title so it moves from the bottom of the screen to the top (similar to the opening credits of Star Wars)?
View 1 Replies View RelatedI'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
I am a PC user of Autocad LT making the transfer to Mac.Just purchased AutoCad LT for Mac 2012.While printing a file from layout in landscape, the bottom edge is missing.
If I print a file in Portrait It will center and fit to page perfectly.(Within The Dashed Lines)The layout page shows the print inside the dashed lines of the printing area as it should.
I have tried moving the layout above the dashed line, then the top that shows outside the lines won't print.I have tried every hing I can think of, without success.
I have a weird problem when printing from Illustrator CS4, i get a symmetric linie at the bottom of the page in the same color as the star i am printing, and the color of the line changes when i change the color of the star ?
View 9 Replies View RelatedI have a problem in which when i set up my title block templates, when i set them up and keep my template inside the dashed area the printed dwg is either cropped or too far inside so it has to be well outside at the top to print within 10 mm of the actual paper, attached is an image of how i have to do it to make it print within 10 mm of the edge of the paper print.
View 3 Replies View RelatedI'm trying to take my title blocks that I have setup in Civil 3D and would like to use them in ArcGIS in my layouts. A company I used to work with did have it setup but I was not part of the setup.
View 2 Replies View Related