Is it better to implement the title block of an electrical drawing in the model space or paper space? I have a co worker who implements it in the model space as shown below. On the other hand, I was taught to implement it in the paper space and then bring in the drawing via viewport.
View 1 Replies
We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
I created a number of 3D blocks to be inserted into a 3D model of a building. I created the blocks in a separate drawing first; i defined them locally, then, when i had them the way i wanted them, I used "wblock" to save all of these blocks to a folder.
I then opened the 3D building model and tried to insert one of my new blocks. I repeatedly get the following:
"AutoCAD Application has stopped working"
with the following info from microsoft:
"Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf9c16
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17651
Fault Module Timestamp: 4e21213c
Exception e053534f
Exception Offset: 000000000000cacd
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033"
I have tried repairing my installation of autocad with no improvement.
i tried opening the drawing of the block itself, copying it, and pasting it via the "copybase" command into the other drawing with the same result.
Occasionally, autocad will ask me if i'd like to debug the program (and visual studio opens) -- it mentions a "StackOverflowException" within acad.exe, and also mentioned "windowsbase.dll".
I am using windows 7 pro x64 and autocad 2011.
CPU: intel i7
Graphics: NVidia GeForce GTS 250
8GB DDR3 ram
The autocad error-reporting dialog never gets launched as it is forced to close before this point.
I know how to insert title block in a layout tab. i want the title block to be the same block in all the tabs i am using. if i have 10 tabs i would like each layout tab to have the same title block. i will also need properties to where i change the date on the cover sheet, all layout tabs will be changed at the same time.
this also needs to be 1 file and not a base file and xref.
i know this works because i am working in autocad where it is implemented. this was done by an individual before i started at this job.
Ok I was able to build a title of my needs but what I'm not able to do is when I insert it to a new drawing i can't put in new text to the title block like (title, scale, job no., date, approved, check, job and so on) but i'm able to put in add text to the templates on auto desk so how do i get my title block like that.
View 9 Replies View RelatedUntill recently I have been able to edit my blocks or xref files in place. Now when I try do that CAD tells me to select nested item. Is this a setting a changed by mistake? If so what is it?
View 2 Replies View RelatedI suppose it's a bug, and I wonder how can it be fixed:
If you edit attribute settings in a dynamic block, and put:
Constant: yes
Lock position: no
You can't neither change the position in the Model, nor edit text. I suppose that with this two settings selected the way showed above, one should be able to move the attribute in Model space.
I already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies View RelatedAC 2012, Win 7 64 Bit..I sent up this template a while ago, and for the life of me, I can't remember how I setup the text in the title block.I had it set so some text would only have to be changed on the first sheet, and the remainder would automatically populate on a regen.
When I tried to duplicate it, in the field dialog box I can't seem to find out how I got the block reference. Field category=Objects, Field names=Object, Object Type=Block reference.
So I have all my layouts in paperspace that are exactly how I want printed. The print preview shows everything properly but when printed the top and bottom of the title block does not print- it gets cut off for some reason.
View 6 Replies View Relatedway I can link my AutoCAD title block attributes to excel and make changes in either excel or AutoCAD and then be able to run an update? The attributes would be “REV” “DWG_NO” “TITLE” “LOCATION” “DRAWING_SIZE” and “FILE NAME”.
View 4 Replies View RelatedWorking in Autocad 2010, needed to insert my title block into my design, I know how to insert, but I can't get design to work in the middle of title block.
View 3 Replies View RelatedIs it possible to create a 'drawing scale' defined attribute inside my title block when brought into paper space? I tried setting it up using 'plotscale' fieldname with various formats and it keeps coming in as 1" = 1' or 1:1 rather than 1" = 20' because that's what my plot scale is inside paper space but my drawing scale is 20 scale. If I bring the title block in model space, it adjusts, but I don't plot from model space. Surely there's a way to make this automated inside paper space.
Also, I just setup a 'Date' attribute inside my title block today. What's the difference between Date, Saved Date and Plot Date? Will 'Date' update if its in a drawing and opened up a month from now and saved or do i need to take 'Date' out and replace with 'Saved Date' or Plot Date'?.
Right now i am using model space only i didn't use the layout but i want create the A3 layout. And I need to attach our customized title block into the layout, how to make it the A3 lay out size and how to attach the title block into layout ?
View 2 Replies View RelatedI am attempting to attach a title block into a layout. This is my process:
1. Go to Building1 drawing, and go to layout. Without any viewports created, I attach a dwg file named titleblock1.
2. When I specifiy the location and scale, I cannot find the attached drawing.
why can't I attach files larger than 1.5 KB? I can't attach anything useful!
(again): how to create one title block that fits all paper sizes?
In the ArcGIS, the same layout can fit all paper sizes and there is no need to customize the layout for each paper size manually. For example, if the map is set up based on A4 paper size and then needed to be printed in A0 size, then all the lay out elements will be automatically proportionally changed to fit the new paper size.
I’m not sure if there is an equivalent features in the AutoCAD that handle this issue
I have just finished my design and I wanted to insert a title block and annotations with pictures using the paperspace option. I want to print the design out onto A1 Paper (80000mm x 56000mm) to a 1:100 scale.
What I want to know is what is the dashed line, how do I make the paperspace A1 size and a 1:100 scale, as well as wanting to know how to make the title block and add annotations to the design.
One problem I am facing is that any line I do create comes out bold as well as when I zoom into the drawing itself every line is bold. Why is this?
I am trying to create a single layout with title blockandviewport to save as a template for future. Right clicking on the layout tab does not produce the menu.
I create a new layout by selecting page set up manager in the file menu, create a new layout, but the tab does not show up at the bottom.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedI have a terminal from Phoenix Contact(their p/n 3031429) it's a 2 level terminal - sttb4. When I associate two terminals (one on the top points, and one for the bottom points), it ends up putting the wrong terminal number on the top line. It does not matter what order i click as "master terminal" or not. And When I am dealing with a PLC, I use multiple 2-highs and it is a pain to constantly go in and manually force it to switch. I will always have one terminal with the wire number(based on rung number) and one based off from a PLC address. Is there a way when associating these terminals it will alway look at the PLC address as the top point?
View 1 Replies View RelatedAny method other than 'font mapping' to convert drawing file to PDF with text searchable feature. Because we are having huge repository of drawing files its difficult go back and do font mapping. Even its works for only at MTEXT.
So, any converter which converts the drawing file to PDF with text searchable PDF.
How to convert existing 2d autocad title block into Revit title block template?
View 7 Replies View RelatedAutocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
How do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedIs it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedI'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
Our company just upgraded to AutoCad 2011. We get files from our clients that exports their files from revit. It seems that Autocad 2011 slows down when reading this files (cursor will have a second or two delay).
View 2 Replies View RelatedI need a way to count blocks (specifically employees on a production line), and I used to use a "count" lisp command that worked great. I'm thinking that lisp doesn't work in LT. I don't use Acad every day anymore, and I am quickly forgetting many commands and tricks.
View 9 Replies View RelatedI have ACA 2011 on 64 bit Windows 7. I can't seem to find the block authoring palette anywhere..
View 2 Replies View Related
