AutoCAD 2010 :: Terminal Attributes In Electrical?
Nov 7, 2012
I have a terminal from Phoenix Contact(their p/n 3031429) it's a 2 level terminal - sttb4. When I associate two terminals (one on the top points, and one for the bottom points), it ends up putting the wrong terminal number on the top line. It does not matter what order i click as "master terminal" or not. And When I am dealing with a PLC, I use multiple 2-highs and it is a pain to constantly go in and manually force it to switch. I will always have one terminal with the wire number(based on rung number) and one based off from a PLC address. Is there a way when associating these terminals it will alway look at the PLC address as the top point?
View 1 Replies
ADVERTISEMENT
Mar 1, 2013
I need to get all Electrical Terminal symbols which is placed in Schematic - Icon Menu - terminal Connector symbols those symbol are in
C:UsersusernameAppDataRoamingAutodeskAutoCAD Electrical 2013R19.0enuSupport
this path and the those symbols are in this ACE_JIC_MENU.DAT is it possible to get those symbol images
View 1 Replies
View Related
Sep 20, 2012
How can I change the layer of a terminal of a components to that component layer without going through each terminal. That is , a block XX has terminals a and b. The XX is currently on layer A and the terminals a and b on layer B. How can I move the layer of a and b to layer A?
Also, I have a 10 page drawing in which I want to tie some components to a particular layer. How can I do this without going through each drawing and doing the changes?
View 9 Replies
View Related
May 5, 2012
Any method other than 'font mapping' to convert drawing file to PDF with text searchable feature. Because we are having huge repository of drawing files its difficult go back and do font mapping. Even its works for only at MTEXT.
So, any converter which converts the drawing file to PDF with text searchable PDF.
View 4 Replies
View Related
Jul 10, 2012
Is it better to implement the title block of an electrical drawing in the model space or paper space? I have a co worker who implements it in the model space as shown below. On the other hand, I was taught to implement it in the paper space and then bring in the drawing via viewport.
View 1 Replies
View Related
Mar 20, 2012
I'm working on creating some blocks for our office. Basically it is a simple block with a few lines that remain and then a couple attributes you can click on and change. I have added the attribute and all is working well.
My only issue is I would like to make the text in the attributes to be bold. For some reason I can't see to do this. Is it not possible.
Basically I want to try and get some of the attributes to stand out more than others. I tried changing the color and the lineweight of the attibute (which worked the color is different) but when it prints it doesn't change at all.
View 2 Replies
View Related
Jan 31, 2012
I have a client border that is attributed, however, when I open the attribute editor, some lines appear in red, while others are black. Turns out the font "FRACTION.SHX" is not on my system. So, I reset one of the problem attributes to a ROMANS. Saved, closed and reopened the drawing and still, the attribute editor displays them in red lettering, as if there is still something not right.
I've attached it. Note that drawing title texts seem fine, but "DRAWN DATE" and a few others are the ones showing up in red..
View 3 Replies
View Related
Nov 1, 2012
Would like to generate a pdf of an acad drawing and have the attributes in the pdf clickable/readable. Am I making any sense?
View 8 Replies
View Related
May 4, 2012
We need to modify the 2D drawings of our terminal..The drawings are in DWG format and and 2D plot plans and isometrics,...which version of autocad would be suitable for the mentioned working above?I was considering Auto Cad LT.
View 5 Replies
View Related
Mar 12, 2012
I have a drawing containing over 100 blocks with 8-10 attributes each. I want to align all the attribute text without rotating the associated blocks. I can select individual attributes by holding down the Ctrl key while I select each attribute. Then I can change the text angle in a pop-up dialog. Is there a quicker way to select all the attributes without having to click on each one? Remember that I do not want to rotate the whole block, just the attribute text.
View 9 Replies
View Related
Jun 21, 2012
After working several hours on a drawing with many attribute blocks, all the text in all the attributes disappeared. Block outline remains as defined but text is gone. Have been using this version (Autocad 2012) about five months and this is the first episode. how can I get the blocks to appear as originally drawn?
View 6 Replies
View Related
Jul 25, 2012
Is it possible to publish alot of files to DWF/PDF and have a field or attribute in the filename.
E.G. A revision within a titleblock in a drawing?
View 1 Replies
View Related
Apr 12, 2012
I have a large amount of P&ID drawings that have blocks with attributes. One of the blocks is missing an attribute field that I need so I recreated the block using the same name and added the missing attribute. When I reinsert the block and say "yes" to updating the block's definition within one of my P&ID drawings everything seems fine except when I try to edit the block to fill in that field.
The newly added attribute doesn't show up but when I right click one of these blocks and select Block Editor the new attribute field does shows up so the redefine did work I just can't use that attribute. Is this a bug in AutoCAD? How I can use this attribute?
View 2 Replies
View Related
Apr 11, 2012
I have a ton of blocks with attributes. Sometimes when I insert them, AutoCAD (2011) prompts me in the command line (perfect). Other times, a prompt box appears to insert attribute definitions (annoying).
What setting do I have wrong, or am I setting the blocks up incorrectly?
View 5 Replies
View Related
May 21, 2013
I am drawing water pumping stations for my company, and they are wanting to do a "Bill of Material" for each job. But they are wanting to do it through the block attribute system in autocad. This actually seems more time consuming than just counting the parts and inserting the new quantities in a table.
I am drawing these with 2 and sometimes 3 views.....the problem with that, I would draw 3 views of a valve (3 blocks), and It counts it as 3 different valves.
View 1 Replies
View Related
Feb 21, 2013
i have been trying for an option called auto numbering of attributes. i have a drawing of floor plan in every room there are 5 to 6 switch boards.I have to give a code and numbers to switchboard like SB1, SB2.......SB42 etc. there are like some 150 switchboards, so i have made an attribute with code and number. problem is when ever i have to add or delete some switch boards some where in the middle. again i have to start renumbering my switch board attribute blocks again from starting. It is very time consuming. is there any command renumbering all attribute blocks in one command.
View 3 Replies
View Related
Jun 28, 2013
I have just added all my attributes to the main template, but the default for the attributes is four dashed lines ----
so if the attribute has data it puts it in, but if it does not it just uses these dashed lines and I cannot seem to remove them. I don't want to make them invisible and don't particularly want to have to use code, but I have never come across this before .
I have attached a screenshot.
View 9 Replies
View Related
Jun 14, 2012
The boss wants to lock down the title block so no one can change the appearance of the "T"block but still wants the attributes to work.
Currently the tile block is a stand alone drawing which is used to start new drawings and is also in template format.
View 6 Replies
View Related
Mar 21, 2013
My company is building a template library, and I want to fill in the .DWG document properties by extracting the information from a the block attributes
For example we need the following document properties (TITLE, SUBJECT, and KEYWORD) to be filled in from the same block attributes (TITLE, SUBJECT, and KEYWORD). The template we have now has this information manually input, but we would like to "automate" it on the .DWG document properties.
How do we do this, use a macro or is there some other way to do this automatically?
View 2 Replies
View Related
Oct 1, 2013
I have a multileader with attributed labels in a block, see included png file. The attributes are indicated by the rectangled text. As you can see the block looks fine, but the leader attaches itself to the insertion point of the block. I want the leader to justify automatically left or right, depending on the drag position of the block. One thing I noticed is that if the block contains an odd number of text lines the leader will automatically self justify. An even number of text line produces what I have here.
View 3 Replies
View Related
Jan 24, 2013
Is there a way by which I can link a paper space block attribute to model space block attribute
In other words
Paper space as a block Title and attribute "QTY"
Model space has a block X and attribute "qty"
Is it possible to edit "QTY" and as a result get automatic update on "qty"
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
View 4 Replies
View Related
Feb 22, 2012
In my title block I have a attribute with the name project_Number. Now what I want to do is the following. When I edit my block with the project number. The project number should automatically be added to a text box without me typing in the project number twice.
E.g.. This Drawing is part of the consulting services provided for Project[Project_Number] and may not be used or applied for any other purpose without prior consultation.
in other word the project number should be reference in the text box from the attribute.
View 6 Replies
View Related
Mar 2, 2012
On Autocad 2012, can we select blocks with the attributes name?
View 9 Replies
View Related
Apr 20, 2011
Is there any way to edit multiple attribute properties, NOT using battman? While battman will chnage every att-block within the drawing, I'm looking for a way to change the text size of one specific line of text within an attribute, and ONLY change it in a certain few within the drawing. It'd be nice if I can select those specific blocks and change the properties in the properties manager, but it's not an option.
View 7 Replies
View Related
Aug 2, 2013
My Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD 2012.
View 9 Replies
View Related
Mar 19, 2013
I was curious if there is a way to lock a specific attributes contents in autocad 2012. I have an attribute with a field inserted that I don't want people to be able to change. If this is possible
View 2 Replies
View Related
Apr 19, 2013
I am trying to create a dynamic block that represents a cable with an attribute attached. The block is essentially a line that runs along the Y axis. I have created a distance parameter with a stretch action attached. The line is to remain anchored at the top and the bottom end is permitted to stretch.
Problem: I have an attribute inserted to the left side of the line (offset at -2mm TC insertion) at a rotation angle of 270. When I select the stretch grip (in the drawing environment) I would like the attribute to remain centered with the line maintain the offset and maintaining the rotation angle. I have exhausted all of my options (limited experience).
View 5 Replies
View Related
Oct 10, 2012
I know how to create a new Palette but I need to populate it with some terminal blocks i use every day, I currently open drawings and copy and paste, How do I add the terminal blocks I created to my custom palette. I have AutoCAD LT 2013
View 2 Replies
View Related
Jul 19, 2012
way I can link my AutoCAD title block attributes to excel and make changes in either excel or AutoCAD and then be able to run an update? The attributes would be “REV” “DWG_NO” “TITLE” “LOCATION” “DRAWING_SIZE” and “FILE NAME”.
View 4 Replies
View Related
Mar 27, 2012
I have a strange problem with one of our library blocks.
For panel schedules and light fixture schedules, we have DWG block files, and we insert them into our drawings and explode them for editing.
The light fixture schedule loses all of its font attributes when we do this. It looks fine when you insert the block, but once you explode the block all the font information is lost. Interestingly, if you insert the block and go into the block editor, the block editor doesn't show the fonts correctly even though the un-exploded block does show the fonts correctly.
An important detail in all of this is that the panel schedules are just drawings (lines, text, hatches, etc.). The light fixture schedule is a table.
I'll attach some pictures showing what I'm talking about and the DWG block file.
View 3 Replies
View Related
Oct 9, 2012
how to export attribute data from a block to a MS Word document template. I am looking to create a check sheet for a drawing, i.e. open a drawing, click a button and a check sheet will be printed out that the operator can complete and sign. However all the drawing info from the title block would already be complete (extracted from the titleblock block attributes).
View 4 Replies
View Related
