Is there a way by which I can link a paper space block attribute to model space block attribute
In other words
Paper space as a block Title and attribute "QTY"
Model space has a block X and attribute "qty"
Is it possible to edit "QTY" and as a result get automatic update on "qty"
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
Is there a way by which I can link a paper space block attribute to model space block attribute
In other words
Paper space as a block Title and attribute "QTY"
Model space has a block X and attribute "QTY_MODEL"
Is it possible to edit "QTY" and as a result get automatic update on "QTY_MODEL"
I am not familiar with diesel/macros yet in Acad.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
way I can link my AutoCAD title block attributes to excel and make changes in either excel or AutoCAD and then be able to run an update? The attributes would be “REV” “DWG_NO” “TITLE” “LOCATION” “DRAWING_SIZE” and “FILE NAME”.
View 4 Replies View Relatedin general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
I received a drawing form a vendor that is in 3d (27 meg)...this drawing contains the model and 4 paper space sheets.
These sheets contain different pieces of the 3d model. I need to create four 2d drawings (one for each sheet). I have tried "export layout to model" with no luck as most of the drawing does not export. I have tried to copy to clipboard but, drawing is too large for the clipboard. I have looked in the "help" and there seems to be nothing on converting a 3d drawing to a 2d drawing or extracting indivigual sheets to a 2d format model. I have tried exploding the information on the sheets in order to get everything to export but that doesn"t work.
I've picked up someon elses drawings and for some reason in paperspace the ltscale is set to 10. i've tried changing the global scale factor to 1 in the linetype manager but it keeps changing back to 10 when i tab through the different sheets.
i normally have both my ltscale and psltscale set to 1 in paper space (and celtscale=1) and have a custom macro asigned to a button for my modelspace views ie 1.100,20,10 etc and a macro/button setting the ltscale back to 1 when returning to paperspace and this worked nicely.
why the global scale factor keeps reverting back to 10?
I just changed jobs to a company that uses MEP2012. It seems as though it is not possible to revert to Acad classic with this version. So, I am trying to mimic classic as much as possible.
One of the challenges I have found is finding the paper space tabs and model tab? it used to be directly above the command line, is there a command to turn it on?
I want to create finished paperspace-tabs, with a specific layer-configuration.
How can I manage that?Each tab has to be exported to PDF as a finished configuration, without changing layers in the end.
Im working with Autocad 2012, havent done much with 3-d modeling. I have a model drawn and I simply want to print it with the top, front, right and an iso view on one piece of paper.
View 2 Replies View RelatedIs there any way to copy a viewport that includes model space and paper space at the same time to another drawing?
View 5 Replies View RelatedIn 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
So I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.
What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.
I would like to read a table that would be linked with block attributes. Like a table (either AutoCAD or Excel) of fluids with pressure, temperature, flowrate... that I would link to attributes. I tried to insert a field in the attribute, but what I've found in fields are properties like Color/Layer/Column/Rows ..
View 4 Replies View RelatedI would like to know if there is a way to make a link between attributes so that text will only need to be entered once to update 2 areas with the same text.
View 9 Replies View RelatedCan I get text in a symbol to change based on file / tab name or other attribute?
View 2 Replies View RelatedIs there a way to have a part, which is a part of a larger assembly, get the title, subject, etc. from its parent assembly? I have my template set to use the "Title" property in my title block but I'd like each individual part drawing to pull that "title" from the assembly, not from the part itself.
View 6 Replies View RelatedI have alot of text oriented in various Layout Viewports. Unfortunately the consultant I am working with failed to mention that his software uses only model space. All of my measurements are orieneted on a Single Layer titled "Noise" in various layouts I was wondering if there was a quick way to take this layer and orient all of this data to model space??
View 5 Replies View RelatedI offen't have head the discussion about where to put the dimensions model or paper space?
I always say the best place to put the dimension is the model space especially when you now have the annotation scale to control it.
The text height in my model space is 1', then I open the model space and try to text in a new viewport, the text height changes to 48'.
I try to go back to model space to do the texting, but the text height is still 48'.
I am having a problem with all of my lines showing up on my prints when printing a 3D model. When I do a print preview, all of my lines show up but when I print to an actual sheet of paper or to PDF, the lines do not show up.
See attachments.
When I draw say a dashed line in the model space it sometimes looks broken exactly how I would expect it to look. Yet when I then set the drawing up in a viewport within the paper space it looks like a continuous line. It also plots as a continuous line.
The only way I have found of working around this is to change the linetype scale of the line in question (usually to around 0.012) this then usually gets the line to display dashed as expected on the paper space. It is very trial and error though with different lines requiring different scales?
I wondered if there is a setting so that they display in the model space exactly as they would display in the paper space or vice versa?
I am getting this problem with my AutoCAD, whenever i am working in paper space and i move around the drawing my AutoCAD will freeze and become non-responsive while "regenerating model". Same thing happens when i switch between paper and model space and vice-versa.
I have gone and updated my AutoCAD with service pack 1 and the "ribbon" hotfix for this problem and it is still there.
Spec:
AutoCAD LT 2012
Windows 7 Home Premium SP1 64-bit
Intel Core i3 3.20 GHz
8GIG Ram
Intel HD Graphics (integrated im pretty sure)
Win 7 / 64b, 4GB, 3.2GHz, Quadro 600. Autocad 2008.
Anyway, I can't seem to be able to type anything in text or mtext windows. I either have my keyboard input ignored completely, or I get blank spaces, depending on what font I choose. Disabling the Aero themes don't work. All runs fine in a XP virtual machine, but more slowly.
I have to get the printed paper model, and to assembly it within Inventor.
At the moment, I have the chassis, and next step should be a surface modelling.
But I`m not sure, which tool should I use. Chassis consist of some bulkheads, and there should be one patch between two neighbors. Patches are already printed:
So I have to bend them, according to bulkheads profiles.
Question is: how can I perform this step? I can`t realize, how to bend these patches, to stich two neighbor profiles. Is it possible for Inventor? Or should I use the authomatic surface fill, and texturing later?
Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies View RelatedBlockTableRecord.Position gets the position of the block in its owner. So if it is a nested block, it gets the position inside the parent block.
I want to get the position of a nested block in the space (model or paper). One way of doing this is getting the location of that parent, and if the parent is also nested, get that position and so on...and then calculate the position of the nested block.
I'm using 2004lt- I have current .dwg in modelspace and set up to plot in PS@ 3/23"-1'-0". I'd like to create a second set of PS tabs to plot portions at 1/4"-1'-0" on the same border when needed.
In its a single viewport in MS and PS the current scale is 1:1 but if i change it to 1/4"-1',etc the plot preview appears wrong
How to set-up the drawing so I don't have to change the ltscale between model space and paper space in order to get dashed lines to read? What is the ideal global scale factor for an architectural drawing in model space?
View 9 Replies View Related I need to gather objects on a specivied layername within model_space in C#.
How do I add a fileter to my filtervalues to only grab model_space objects.
TypedValue
[] filterValues = new[] { newTypedValue((int)DxfCode.LayerName, LayerName.ToUpper()) };
[Code]....