AutoCAD 2010 :: Quick Select Attributes
Mar 12, 2012
I have a drawing containing over 100 blocks with 8-10 attributes each. I want to align all the attribute text without rotating the associated blocks. I can select individual attributes by holding down the Ctrl key while I select each attribute. Then I can change the text angle in a pop-up dialog. Is there a quicker way to select all the attributes without having to click on each one? Remember that I do not want to rotate the whole block, just the attribute text.
View 9 Replies
ADVERTISEMENT
Mar 2, 2012
On Autocad 2012, can we select blocks with the attributes name?
View 9 Replies
View Related
Aug 2, 2013
My Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD 2012.
View 9 Replies
View Related
Sep 17, 2013
I just tried to use the quick select feature by right clicking in my drawing but it is not selectable as the words "quick select" are greyed out. I tried restaring my PC but this hasn't fixed it.
If I type QSELECT the quick select box pops up but I don't want to have to type this every time I want to use this feature
View 3 Replies
View Related
Mar 27, 2013
I have some blocks that are associated with regions in my drawings. I want to select regions based on attributes in the associated blocks. Is that possible?
Is it possible to link my blocks to an external database and select the regions based on a field in the linked database?
View 1 Replies
View Related
Oct 26, 2011
In Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies
View Related
Jul 15, 2013
I remember being able to select anything on the canvas with my Quick Select tool in CS5.5 Photoshop Extended. Recently, making the switch to CC, the Quick Select tool will show my slection as I drag along the canvas, but once I release the mouse, the selection seems to be reduced to the visible pixels. I was intentionally trying to fill the transparent sections with my effects as well.
Mind you, the magic wand will select transparent pixels just fine, but it also adds unintentional sections which is irritating. I should probably also pint out that I already looked into the "lock transparence" option in the layers, but I did not activate anything of the sort.
View 3 Replies
View Related
Aug 6, 2013
My Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD Civil 3D as AutoCAD 2012.
Below you can see that Attributes are not any option.
I'm trying to make my changes in the local CUI file.
View 2 Replies
View Related
Aug 12, 2013
My Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD Civil 3D as AutoCAD 2012.
Below you can see that Attributes are not any option.
I'm trying to make my changes in the local CUI file.
View 1 Replies
View Related
Jul 6, 2012
I am having problems with quick select not working properly in 2013 when I am cleaning up X-Refs selecting hatcing or anything else it does not just delete what I am tring to select it just deletes everything. If I go back to any prevous version of AutoCAD it works fine the only solution i can think of is to reinstall.
View 9 Replies
View Related
Jun 12, 2013
Civil 3D 2013
Windows 7 x64
I've found several people that had this problem through searching, but none of the fixes worked for me. I'm unable to use the quick select feature as it does not list anything other than "multiple". I've tried different files, different selections, repaired the installation, complete reinstall, updated with SP1 and hotfix 3 to no avail. I also have Autocad 2007 with SP 1 installed, as well as Autocad Architecture 2014, if that makes a difference.
View 9 Replies
View Related
Sep 23, 2012
How Can I Select All Blocks Attributes Using VBA Coding
all blocks with any name with any layer with any property
View 7 Replies
View Related
Mar 1, 2012
how to quick select all the blocks from a specific layer (for instance XPTO) and export them along with their attributes, exactly as we do by quick selecting them and then, through AutoCAD Express -> Attribute Export Info, but in a script...
View 9 Replies
View Related
Jun 11, 2013
I finally got some Lisp scripts working. They generate a block library from a CSV file. The script reads the file, and generates a simple rectangular block based on dimensions on the line. I have another script that can read a csv of block names and values, and add these as attributes to the block.
The attributes added are simple, like "weight" and "max stack qty". I would like to be able to see these values in the properties tab or in quick properties. In my CUI I have "Display Custom Attributes" checked under "block reference".
However, when I select a block, no attributes show up. I can get it to show me things like "name" and all of the scaling values, just no attributes.
View 0 Replies
View Related
Jun 18, 2011
Is there a way to select attributes from a block if I pick a point inside the block?
View 6 Replies
View Related
Dec 15, 2013
What order of operations do you use to include multiple attributes in a WBlock definition? I can't figure out to include all of attributes and have them in a specific order.
View 2 Replies
View Related
Dec 24, 2008
I'm running Photoshop CS4 on Vista with 4G RAM. Even when working on a relatively small picture (34M/69M), I get an error when trying to use Quick Select. The message says "could not complete your request because there is not enough memory". I am not running any other applications and I am allowing Photoshop to use 80% of my RAM. I have a 700G scratch disk. What gives?
View 3 Replies
View Related
Mar 19, 2013
The Quick Select Tool is great at selecting irregularly shaped objects with well-defined boundaries, and the Refine Edge dialogue box is good at making small, important adjustments to complex "soft" borders like a person's hair. But what I most often need to do is isolate a figure that has good contrast against part, but not all of its background. Imagine a person in a tan shirt standing partly in front of a dark green bush and partly in front of a tan house. The QST will be great for the bush, but it always explodes the selection to the house or cuts the guy's arm off.
Is there a way of getting more or less the selection I want, and then using the plain old lasso tool to add or subtract finer manual selection?
View 4 Replies
View Related
Feb 18, 2013
the picture flashes when using quick select in PS6 with Windows 8, AMD video card with latest drivers.
View 4 Replies
View Related
Nov 21, 2012
I'm trying to cut out a selection using Quick Select (all refine edge settings off) and then paste into a new layer. However, I can't get a 100% pixel perfect alignment once I paste. Cut/Paste using the rectangle select does match 100%. The quick select tool should allow for 100% pixel perfect alignment, correct?
This is before cutting (note middle circle)
This is after cut/paste and aligning
View 2 Replies
View Related
Jul 1, 2013
Is there some way to select by attributes? For example, select all lines that are grey and under 4cm long? Or select all text under 8pts in Tahoma?
View 9 Replies
View Related
Aug 14, 2013
I've got 1800 attributes that need to be numbered from 1 to 1800 from left to right.
I got a Lisp that can do that but the only thing is when I select it with selection window, he wil sort all atributes on their unique handle code. So I have the first 40 attributes going from left to right with groups of numbers at the wrong place like 1-10, 31-40, 21-30, 11-20 instead of 1-40.
This is because when you copy an attribute he wil place a new unique handle coded attribute and the copy contains the previous handle code.
But if I select them one by one from left to right and run my lisp it just works fine cause it seems it doesnt look at the handle code to place the numbers in that order.
So is there a way that I can select multiple attributes, like I'm selecting them one by one from left to right, so I can bypass this attribute handle code?
View 6 Replies
View Related
Jun 26, 2013
Every time I use Quick selection tool it selects the area which I don't want to use. I have a website called JoGuru Social Travel Network for which I need to edit it's logo. Now since the logo has many green and blue variation I can't select the area I need.
I thought of changing the color of logo so that it looks refined but green color signifies travel and i can't think of using any other color. It would have been easy to pick other color. For me Green is God. I must use that only. I also need to encorporate small road in it that defines journey to infinity. This tool use to work well before. It's giving me problem for the first time.
View 6 Replies
View Related
Mar 12, 2013
On one computer when I select my selection tool I have a circle with a + inside or - whichever I choose to select or deselect an object. BUT, on my other computer I have a large cross hair type thing and I can't tell whether I am selecting or deselecting... what the heck is going on!!
View 2 Replies
View Related
Mar 7, 2012
Im trying to get used to using Quick Select and Refine edges to mask out objects in my photos.
It works pretty well but Im still having trouble in some spots getting the edge to be a smooth curve.
How do you get the refine edge function to allow you to modify its edge so you can have a perfectly smooth edge?
Ive tried using the Refine Radius Tool and it just doesnt smooth it out completely.
View 8 Replies
View Related
Nov 23, 2012
I use Quick Properties in static mode mostly for counting objects and quickly seeing the length of lines and polylines. These lengths are listed in feet and inches. Would it be possible to add an additional length item to the quick properties menu which shows the inches/decimal length? Would be awesome as I wouldn't then have to do the math to convert to inches.
View 3 Replies
View Related
Aug 29, 2011
My quick properties pick box came on for no reason. i have turned them off everywhere i can think of but it will not go away. i do not want the hovering QP to ever come on, how can i make sure this doesn't happen.
View 9 Replies
View Related
Feb 13, 2013
I added the Layer group (On / Off Freeze Lock / Unlock and Layer name) to the Quick Access Toolbar. I only see the first part name of the layer. Is there a way to stretch this part of the group in the QAT tool bar so I can see the more of the layer name? The partial name and layer color may be a sufficient clue as to the whole layer name over time. Would be nice to see the whole name until then.
View 1 Replies
View Related
Jul 22, 2012
How to change the color of the quick access toolbar? Mine is SO hard to see! This is on a Windows 7 64-bit OS.
View 5 Replies
View Related
Oct 12, 2012
Is there a quick and easy way to number items in a drawing? I have attached a pdf and would like to number the seats 1-100.
View 1 Replies
View Related
Sep 11, 2012
Instance 1. I have lost the Quick Access Toolbar located above the ribbon to the of the right of the application menu button. I can no longer save a drawing and no longer undo or redo any commands that I need to edit while creating a drawing.
Instance 2. I created a drawing saved it and then later came back to it. Went to Veiw tab then clicked the Tile Vertically button. My drawing on one half of the screen and a blank one on the other half. I X out of the screen and started the drawing once again and the drawing area is now labled Drawing1.dwg with a blue square border around the drawing area. With no split screen. I would like to get back to the original drawing area without the blue border going around it titled Drawing1.dwg. I was trying to use the move command to get my drawing into the empty space next to it.
View 1 Replies
View Related
