I need to get all Electrical Terminal symbols which is placed in Schematic - Icon Menu - terminal Connector symbols those symbol are in
C:UsersusernameAppDataRoamingAutodeskAutoCAD Electrical 2013R19.0enuSupport
this path and the those symbols are in this ACE_JIC_MENU.DAT is it possible to get those symbol images
I have a terminal from Phoenix Contact(their p/n 3031429) it's a 2 level terminal - sttb4. When I associate two terminals (one on the top points, and one for the bottom points), it ends up putting the wrong terminal number on the top line. It does not matter what order i click as "master terminal" or not. And When I am dealing with a PLC, I use multiple 2-highs and it is a pain to constantly go in and manually force it to switch. I will always have one terminal with the wire number(based on rung number) and one based off from a PLC address. Is there a way when associating these terminals it will alway look at the PLC address as the top point?
View 1 Replies View RelatedNow if only I could make my electrical schematic drawings in Inventor and not have to use Autocad Electrical. When will this be possible?
View 1 Replies View RelatedWe have an engineer who uses AutoCAD LT 2014. He needs to use an electrical symbols library in AutoCAD so he can properly create the prints & drawings for machines, schematic edits, etc.
Looking for such a library/add-on for AutoCAD has been unsuccessfully. How to obtain electrical symbols for AutoCAD LT 2014?
If there is a British standards for drawing symbols for electrical, fire, security, lighting etc. Seen so many different ones to use and is there a web site i can go on that would show me the correct symbols i should use.
View 9 Replies View RelatedIEC schematic symbol in icon menu is absent. There is just JIC symbol library. Even there is no IEC folder in "Autodesk/Acade/Libs" folder. It contains folder named: Hyd_Iso125, JIC1, JIC125, Panel, Panel_mm, pid, pneu_iso125.
View 1 Replies View RelatedI opened electrical by accident and now all my files default to Electrical rather than Mechanical. How can I change this?
I was certain this was easy, right click a file OPEN WITH, etc browse to proper program...
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
In Ken LaRue's demo (see attachment B), theres a lot more option for you to tinker with in CFX.mine (see attachment A) only stops at 'timing' option. what do i need to do to view the rest of it?
and because i cant view the rest of the option, i can't change CFX schematic view to Action schematic view.
With reference to the standard hydraulic symbols which are contained within the library in Autocad 2013,
To which standard they conform i.e. : ISO 1219-1 ?
After converting and .dgn file to autocad, the diameter symbols have turned to question marks, and some of the fractional inches turned to f. The text styles are listed as dgn003.shx which is missing? What is the best approach to fix this problem?
View 4 Replies View RelatedWhen working in a drawing, I don't see a selection for weld symbols in Annotate - Symbols. Are they not available in LT? Is there something I need to do to activate them?
View 1 Replies View RelatedWe need to modify the 2D drawings of our terminal..The drawings are in DWG format and and 2D plot plans and isometrics,...which version of autocad would be suitable for the mentioned working above?I was considering Auto Cad LT.
View 5 Replies View RelatedI know how to create a new Palette but I need to populate it with some terminal blocks i use every day, I currently open drawings and copy and paste, How do I add the terminal blocks I created to my custom palette. I have AutoCAD LT 2013
View 2 Replies View RelatedHow can I change the layer of a terminal of a components to that component layer without going through each terminal. That is , a block XX has terminals a and b. The XX is currently on layer A and the terminals a and b on layer B. How can I move the layer of a and b to layer A?
Also, I have a 10 page drawing in which I want to tie some components to a particular layer. How can I do this without going through each drawing and doing the changes?
We are installing photoshop on Win 2003 server running terminal services. We have about 15 students per server. I was wondering when setting the system performance on memory usage is the setting on a global scale or on per-user.
Sample: 4gigs ram adobe default setting is is about 50 to 55% of total ram leaving about 2 gigs left. Now how will photoshop handle the memory if 21 users were using the system at the same time. Would that 2 gig be divvied out to each user who ever is needing more at that time get more memory?
I am asking this because there is talk about setting the memory of PS lower to around 300 megs under each student profile. So that the student will not use more than allowed. Does photoshop recognize unique performance settings per user in terminal services? OR does PS see system performance settings as a global change, remember we have only one instance installed of PS and that is a server.
I need to create a block for all our schematic work. Right now were are doing the schematic part in Visio, but like to move that part to auto cad if it is possible.
I wonder if this is possible to create though. A dynamic block that you can drag out to expose more terminals To be able to label the terminals individually. For each wire terminal to provide a snap function so lines can easily snap to them. Be able to label each wire that gets connected individually.
Be able to add a heading to each block for make and model number. Not sure if acad can actually do all this with dynamic blocks. I attached an image from Visio as well.
When I try to create new baluster in the family but it belongs to air terminal category. Is there any clashes? Any family category description. Such as what is the difference between Lighting fixture and Lighting device. In Autodesk library has few families which has same things with different category.
View 2 Replies View RelatedI've set up GIMP 2.8.4 and it works great on my mac with Mountain lion.
However I need to run a batch script on a group of images and all tutorials for that take for granded that running gimp on a terminal window launches gimp. Well in my case it doesn't! And tbh I haven't found where I should point (the path to) the gimp command so that it would run.
So basicaly running Gimp on a terminal returns error no such command. And I need to know what path to add to my mac's PATH variable so that Gimp doesn't return an error. After that I would like to run the batch script from the terminal for the group of images I have.
WOuld it be possible to create a terminal emulation plugin?
View 5 Replies View RelatedAny site with a comprehensive selection of electrical construction symbol libraries?
View 1 Replies View RelatedIs there a way to auto label every line length of a schematic so that it displays on the cad drawing? Sort of like using the linear dimension tool but for all available lines of a layer or line within a drawing.
View 3 Replies View RelatedI want to execute a .JSX file by using Mac Terminal Command like i am doing in MS Windows by using following cmmand: C:/ start illustrator.exe Script.jsx
its working fine but i want to do the same thing in MAC, i am working on an Application in that I am using CS6 SDK to add some functionality in my Adobe Illustrator, but didnt find any method to execute JSX files directoly from VC++/CS6 SDK.
I want to lay electrical conduits in my model but have problem when the conduit changes plane. how can i quickly lay conduits may be by using bends etc as blocks.. if possible... and then just extend conduits using extend command or just giving the distance....
bend.JPG
I have heard that Autocad MEP is great for laying electrical conduits etc. I tried using it but could not get desired results because of probably wrong settings. the biggest problem is the bend radius. also i would like to know how to use custom switch boxes and junction boxes as per my country standards.
how to use auto cad for electrical designs for new architectural drawing for a new building project that will cover.
View 2 Replies View RelatedIf ever you have samples of structural housing such roofing and walls panels in pdf or anything just to build a Structural house.
View 9 Replies View RelatedI have an electrical drawing of a system, but the drawings are all on one page, and in order to print i have to go to print and then highlight want i want to print individually, is it possible to print all in one shot . (please see the attached file)
View 9 Replies View Relatedcan you confirm if the CS4 version of illustrator will work on a 64bit version of Windows 2012 TS?
View 1 Replies View RelatedI have 2 pipes with connectors on each end...How do i make a realistic shape wire to go from each connector....there will be a wire between a connector on 1 end of the pipe and it goes to a connector on the end of the other pipe....would this be constructed in the assembly and saved as a part to a folder....also can the wire be made as a part and then placed in the assembly...no pipe and run as would prefer to either make as a part or create in the assembly and save as a part
View 3 Replies View Relatedwhat is the method used to create a electrical cord between these 2 connectors.I want the cord to have realistic look such as bends in the cord.I am afraid i do not know how to perform this procedure. How to make cord between 2 connectors.
View 6 Replies View RelatedWhat type of line are you using to show electrical wiring in a house, I've used the arc line and I really don't like the flexibility of that, it want bend like I want it to. The next thing I'm trying now is to use a leader line without arrows, that works better, you can bend that little rascal all over the place.
View 6 Replies View RelatedAny method other than 'font mapping' to convert drawing file to PDF with text searchable feature. Because we are having huge repository of drawing files its difficult go back and do font mapping. Even its works for only at MTEXT.
So, any converter which converts the drawing file to PDF with text searchable PDF.