AutoCAD Inventor :: Adding Electrical Cord Between 2 Connectors
Jul 30, 2013
what is the method used to create a electrical cord between these 2 connectors.I want the cord to have realistic look such as bends in the cord.I am afraid i do not know how to perform this procedure. How to make cord between 2 connectors.
View 6 Replies
ADVERTISEMENT
Oct 2, 2013
I have 2 pipes with connectors on each end...How do i make a realistic shape wire to go from each connector....there will be a wire between a connector on 1 end of the pipe and it goes to a connector on the end of the other pipe....would this be constructed in the assembly and saved as a part to a folder....also can the wire be made as a part and then placed in the assembly...no pipe and run as would prefer to either make as a part or create in the assembly and save as a part
View 3 Replies
View Related
Dec 5, 2012
I am trying to make a model of coil cord cable (looks like phone cable) in the autodesk inventor10. I know to make a model of the coil cord when it is straight, but how can i make the coil cord model when it is folder.
View 2 Replies
View Related
Dec 3, 2013
What way do i add tube to the connectors.Should it be added in assembly or as a separate part?
Inventor 2013/2014
View 5 Replies
View Related
Oct 10, 2013
What is the best way to draw pipe frame using "KEE KLAMP" connectors?
Pipe and tube or frame generator?
View 9 Replies
View Related
Oct 24, 2013
I want to build a connector library in Inventor. So I choose to start with the 8STA motorsport connectors.
I build the connector based on parameters and created an iPart. So far so good.
View 4 Replies
View Related
Nov 18, 2011
I am trying to create a ribbon cable between two connectors, but for some reason the ribbon cable starts away from the connector and I am not sure why?
View 4 Replies
View Related
Feb 21, 2013
I've been creating documentation for cable assembly for many years now and I am trying to determine a way to use the Inventor Cable and Harness feature to accomplish the same detailed drawings as I previously made by hand. The first thing I notice is that the connectors do not exist at the cable level, even though this is how they will be manufactured. Is there any way to generate a cable with wiring and connectors all existing together in an assembly that can then be documented in a drawing?
View 6 Replies
View Related
Oct 2, 2013
Now if only I could make my electrical schematic drawings in Inventor and not have to use Autocad Electrical. When will this be possible?
View 1 Replies
View Related
Oct 7, 2013
why some of the wires are not showing up in my idw? The segments are there but the wires are a "no show"..
View 1 Replies
View Related
Oct 10, 2013
I want to build a pipe or tube frame and use tube or pipe connectors to join the pipes.
What is the best way? "Tube and pipe" or "Frame generator"?
View 1 Replies
View Related
Dec 18, 2011
I'm trying to animate a phone handle cord that moves with the phone handle, i tried with the massFX but still didn't get it right.
Is there any other way to do that or should i keep experimenting a little bit more until i get what i want?
View 2 Replies
View Related
Sep 8, 2009
I'm trying to make some curtain walls with spider connectors
(see attachment)...
I've downloaded some families from internet, buy I don't understand how to attach them to the curtain wall.. they appear as cw panels.
View 2 Replies
View Related
Feb 5, 2013
Any site with a comprehensive selection of electrical construction symbol libraries?
View 1 Replies
View Related
Nov 7, 2012
I have a terminal from Phoenix Contact(their p/n 3031429) it's a 2 level terminal - sttb4. When I associate two terminals (one on the top points, and one for the bottom points), it ends up putting the wrong terminal number on the top line. It does not matter what order i click as "master terminal" or not. And When I am dealing with a PLC, I use multiple 2-highs and it is a pain to constantly go in and manually force it to switch. I will always have one terminal with the wire number(based on rung number) and one based off from a PLC address. Is there a way when associating these terminals it will alway look at the PLC address as the top point?
View 1 Replies
View Related
Jun 9, 2012
I want to lay electrical conduits in my model but have problem when the conduit changes plane. how can i quickly lay conduits may be by using bends etc as blocks.. if possible... and then just extend conduits using extend command or just giving the distance....
bend.JPG
I have heard that Autocad MEP is great for laying electrical conduits etc. I tried using it but could not get desired results because of probably wrong settings. the biggest problem is the bend radius. also i would like to know how to use custom switch boxes and junction boxes as per my country standards.
View 9 Replies
View Related
Aug 21, 2011
how to use auto cad for electrical designs for new architectural drawing for a new building project that will cover.
View 2 Replies
View Related
Feb 27, 2012
If ever you have samples of structural housing such roofing and walls panels in pdf or anything just to build a Structural house.
View 9 Replies
View Related
Feb 3, 2012
I have an electrical drawing of a system, but the drawings are all on one page, and in order to print i have to go to print and then highlight want i want to print individually, is it possible to print all in one shot . (please see the attached file)
View 9 Replies
View Related
Mar 1, 2013
I need to get all Electrical Terminal symbols which is placed in Schematic - Icon Menu - terminal Connector symbols those symbol are in
C:UsersusernameAppDataRoamingAutodeskAutoCAD Electrical 2013R19.0enuSupport
this path and the those symbols are in this ACE_JIC_MENU.DAT is it possible to get those symbol images
View 1 Replies
View Related
Sep 25, 2011
What type of line are you using to show electrical wiring in a house, I've used the arc line and I really don't like the flexibility of that, it want bend like I want it to. The next thing I'm trying now is to use a leader line without arrows, that works better, you can bend that little rascal all over the place.
View 6 Replies
View Related
May 5, 2012
Any method other than 'font mapping' to convert drawing file to PDF with text searchable feature. Because we are having huge repository of drawing files its difficult go back and do font mapping. Even its works for only at MTEXT.
So, any converter which converts the drawing file to PDF with text searchable PDF.
View 4 Replies
View Related
Aug 27, 2013
We have an engineer who uses AutoCAD LT 2014. He needs to use an electrical symbols library in AutoCAD so he can properly create the prints & drawings for machines, schematic edits, etc.
Looking for such a library/add-on for AutoCAD has been unsuccessfully. How to obtain electrical symbols for AutoCAD LT 2014?
View 3 Replies
View Related
Jul 10, 2012
Is it better to implement the title block of an electrical drawing in the model space or paper space? I have a co worker who implements it in the model space as shown below. On the other hand, I was taught to implement it in the paper space and then bring in the drawing via viewport.
View 1 Replies
View Related
Jan 16, 2013
Objective: to show in an electrical plan view a 2 and 5 gang light switch box.
Problem; I have both a 2 and 5 gang light switch plates in separate locations. I need to show in an electrical plan that there are both a 2 and 5 gang switches in these particular location without crowding the wall with switch symbols.
View 2 Replies
View Related
Feb 16, 2011
If there is a British standards for drawing symbols for electrical, fire, security, lighting etc. Seen so many different ones to use and is there a web site i can go on that would show me the correct symbols i should use.
View 9 Replies
View Related
Oct 6, 2013
I need to make an Electrical Wiring Diagram of an Induction Furnace.
[URL]
View 6 Replies
View Related
Jan 13, 2012
Till now i was working with the various mechanical design software but now my project requires to design electrical distribution boards.I am not quite sure about reading the electrical schematics and how it works,so is there any literature available for the same or else
View 1 Replies
View Related
Nov 16, 2011
how to programatically in AutoLisp GET and SET the drawing descriptions from Drawing Properties (Description 1, 2 and 3) in AutoCAD Electrical 2012 ?
I need change this values through a script in LISP.
View 2 Replies
View Related
Mar 5, 2013
I opened electrical by accident and now all my files default to Electrical rather than Mechanical. How can I change this?
I was certain this was easy, right click a file OPEN WITH, etc browse to proper program...
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
View 7 Replies
View Related
Sep 19, 2012
I setup my ceiling plan so that I see all of the light fixtures on my sloped ceilings. But I can't see my electrical switches, why?
I check my VV and the electrical components is checked for visibility. What do I have to do to make them show up?
View 1 Replies
View Related