ACAD MEP 2012..Yes all the typical settings are correct.I have a 2-d drawing with 4 viewports, 2 of which will not print Black & White? Thought it might have to do with visual styles but changing them had no effects.
View 3 RepliesI am trying to print only in black and white from Autocad, so that only line weights can make a difference, but it does not work. Everything turns out in colour, using the colours I used for working in Autocad.
View 8 Replies View Relatedhow to select Monochrome so I get my drawings printing in black in only? I can't seem to be able to select this function?
View 9 Replies View RelatedI just moved from ACAD 2008 to 2010. I for the life of me cannot figure out how to plot my drawings to a monochrome (black and white) drawing/PDF. Every plot comes out as by layer colored plots.
I have tried using Page Setup Manager and created a (or what I thought was a) monochrome .stb file. However, even with the mono.stb file selected the plots still plot in color.Is it possible to configure a .stb file to plot in only black?
my DWG is set to monochrome.ctb. Everything prints ok except my 2 isometric 3D viewports which prints in its real color (visual styles are conceptual). Why don't they print also in monochrome? I saw a couple of discussions on that problem but the "hidden" and "hidden 3D" options in shade option isn't working...I want them to stay the same, just print in monochrome with screening! I read about some option called "hidden legacy" but can't find that anywhere.
View 2 Replies View RelatedWe have experienced what we think is a bug in AutoCAD 2010's printing. We are running A2010 with Update 1 & 2 installed. Same issue on both x32 & x64 hardware.
Each project is setup with a title block xref'ed into the sheet (quite common method).
The Title Block xref generally has images loaded & therefore the image is a child to the sheet file when the TB is referenced in.
We have used this method for about 15 years across most versions of AutoCAD with no issues before now.
Now on AutoCAD 2010, when we print the sheet, the xref'ed TB images print black & white, rather than color. However if we use AutoCAD 2008 with same pagesetup/ctb/pc3 etc, we get the same print, but image is colour (as we would expect & want).
This leads us to think that there is some issue in AutoCAD 2010 with xref'ed images & how they are treated when plotting.
To complicate matters further, if we bind the title block, thus making the image embeded within the sheet, the images now print fine in full colour.
So, if a image is loaded via a xref'ed dwg, it plots in Black & White. If image is referenced into live sheet (not via xref), then it plots in color. All other xref'ed linework prints as expected (defined by ctb).
Is there any new variable which manages the colour printing of the image in A2010 which we are not aware of (that didnt exist in A2008)?
I am printing a Layout that has 3 Viewports. The View ports are of an aerial photograph that is a 600DPI TIFF file about 1GB in size. When I print the single sheet 24x36 the PDF file is 75mb
I am new to Acrobat X, I had been using version 7. I remember there being a reduce file size option in the old version but I cant find it in X.
Any tips on getting the printed PDF file smaller? Is it something I can do in AutoCAD or Acrobat?
Details:
AutoCAD 2010
Win 7 Machine
8GB RAM
2.8 ghz i7
Adobe Acrobat Pro X
My problem is after spending hours doing designs I then need to go back to paper to draw the design with my measurements and interior detail like a wireframe view. I've tried to print a wireframe view but it always prints in a rendered version which is useless for me. I tried exporting the design in various formats but to no avail.
View 2 Replies View RelatedI have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
I have a layer VPORTS. I create viewports in this layer
On a 10 sheet drawing. viewports are visible and selectable on 9 sheets. Only one sheet they have dissapeared
I cannot select or edit vports on this one sheet
I have rebooted.. turned on and thawed all layers.. can see the viewports on sheets 1 thru 9 and edit them but not on sheet 10
I have two viewports in a drawing file. One is for existing and new conditions and one is for existing and demolition conditions. So, I want one viewport to freeze some layers and the other viewport to freeze other layers. After picking and freezing certain layers in each viewport, I created New Layer States - One called New Floor Plan and the other called Demo Floor Plan.
When I click inside one of the viewports and select the appropriate layer state it changes both viewports to the same layer state. That is not what I want. Is it possible to have one layer state in one viewport and another layer state in another viewport?
I am trying to organize my drawing in model into different viewports for printing purposes. However, in Layout # 1, once I delete an item it also deletes the item in model space. In Layout # 2, can't edit, select, highlight or anything ( I am in Layer 0). How can I fix that ? Basically, I want to create several layouts, each layout will contain a certain section of my drawing in model space then. I am not "layout savvy", trying to get hang of it.
View 2 Replies View RelatedIs there a command to lock all vieports within the drawing?
View 9 Replies View RelatedHow can I tell when a viewport (any viewport) in paper space is currently active.
This is actually related to a .NET programming error, whereby even when the drawing is in Paper space, if a viewport is active, I am unable to programmatically access the Layout. I need to be able to, at a minimum, detect this condition, then switch back to full paper space (i.e. de-activate the viewport) if possible.
He's got a series of roadway plans where the North arrow shows up fine on some sheets, but the fill (solid hatch) in the arrows doesn't display on others. The arrows are blocks, all the elements in the block are on layer "0" (zero).and the blocks reside in model space.
Just for grins. I had him expand a viewport (where the arrow looks fine) to capture a problematic arrow and... it looks fine. So, it's not an arrow/block/layer issue. It's a viewport issue.
I am working on a sheet which curently has the MAXACTVP setting set at 30 which is adequate for the number of VP's currently on the sheet but the contens are still not visible unless i move them.
View 4 Replies View RelatedI want to create a hot key that will lock viewports on/off. The command is MVIEW / L / ON OR OFF. What I would like to do is have VPL lock viewports and VPLL unlock viewports. How can I do this?
View 1 Replies View RelatedI am having a problem plotting any viewports that are not set to 2D wireframe. All viewports set to 2D wireframe plot correctly but anything set to hidden of conceptual plots as a black square.
View 1 Replies View RelatedLet's say you create a floor plan, and you use the Layer State manager to separate the framing plan, finish plan, reflected ceiling plan, etc. Now, when you go to create a sheet, you xref this plan into model space with all of the layers thawed/on, go to your titleblock in paper space and make a viewport.
Currently, if I click into a viewport and use the Layer State manager to show just the information of the RCP, it will freeze all of the layers I don't need, but it will freeze those layers in model space, instead of just within the viewport. It gets very time consuming doing it the way I always understood to do it; making sure all layers are thawed/on in model space, and then going into each viewport and manually VP-freezing each layer I don't need.
So can Layer States be set up to work within viewports, to only have those layers VP-frozen?
In some drawings the viewports automatically display viewport objects when I copy them and some they do not. There must be a systems variable and I searched through the systems variable tool in the Express tools and couldn't find it. How to get consistent results when copying viewports.
View 6 Replies View RelatedWe (several people at my company including myself) are having a problem where we set up sheets for plotting in paperspace that include multiple viewports. Often, the projects require us to use irregularly shaped viewports (i.e. not square/rectangular). When we print the sheets to our plotter, to PDF, or to any other printer, the page looks fine. However, if we print them to DWF using the DWF6 ePlot.pc3, the viewports will square off, allowing items that were not supposed to be shown outside of the viewport to come through. This has caused extra information to show up across our sheets, making portions of them unreadable.
We are at a loss on how to work around this, beyond only using square/rectangular viewports. Is there a way to get the DWFs to match what we can get out of other plotters?
I have a sheet set with several sheets, each sheet with a viewport that ultimately xrefs to the same base file. In that base file, I have changed some layer properties (color), but I can't get those properties to show up in the viewports on each sheet unless I go into the layer properties of each viewport on each sheet and change them individually. On other layers, I have set them to be no plot layers in the base file, but they still plot on the sheets. I have tried just simply freezing them as well, but they still show up in the viewports. I have tried viewport overrides, but maybe don't do it properly? How can I get these properties to translate over to the viewports on each sheet without going through each sheet one by one?
View 3 Replies View RelatedI have a drawing file with lots of layouts, some of which have multiple viewports. I want to create a new layer and use it in just a few viewports. Is there a way to set the default vpfreeze setting to frozen for new layers? That way I can just thaw it in a few viewports instead of trying to vpfreeze it in a lot.
LT, C3D 2005 - 2014
XP, Vista, 7
I have an existing drawing with numerous viewports. I would like to know if there is a way to link those existing viewports to the set as "sheet views" without having to delete them and re-create them using the normal sheet set process.
I've noticed that each viewport has a variable in its properties display called "link to sheet view" with a yes or no entry, but it doesn't seem changable.
Is this possible, or must I re-create them from scratch?
After drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
In ACAD 2012 if there is two viewport in a layout hatch shows up as solid. I tried the same in ACAD 2011 and everything works ok.
View 4 Replies View RelatedI have a delay when switching back and forth between model space viewports,
View 7 Replies View RelatedI have wall section sheets that are best viewed in portrait mode, but use the same landscape page setup as the other sheets in the set. So the viewports for the sections are rotated 90 degrees and difficult to read on the screen. Is it possible to rotate the paper space UCS and rotate the paper space "view" to match the UCS, like you can in model space?
I don't want to rotate the viewports and title blocks themselves & set up a portrait page setup. This is because I'm using Acrobat's PDF maker for batch plotting and not using the same page setup for each sheet makes one click, fire-and-forget publishing impossible. And I don't want to use DWG-to-PDF because it doesn't have any configurable image compression settings that I know of.
If it's not possible, then it's not the end of the world. We have AutoCAD Architecture and AutoCAD LT 2012 & 2013.
we lose our Cross Hairs coming out of view ports, they do retrun a few minutes later.
View 2 Replies View RelatedI have 2 quick questions:
1- How do I turn OFF the display of Layers in Layout viewports, but they remain ON in the Model?
2- How do I rotate a group of objects to match my orthogonal UCS?
For some reason, my plot style is applied to my viewports. So for example, when I choose a monochrome plot style for the layout, the view ports in that layout display in black and white. I want to disable this. Is there a system command to turn this off?
View 2 Replies View Related