I just moved from ACAD 2008 to 2010. I for the life of me cannot figure out how to plot my drawings to a monochrome (black and white) drawing/PDF. Every plot comes out as by layer colored plots.
I have tried using Page Setup Manager and created a (or what I thought was a) monochrome .stb file. However, even with the mono.stb file selected the plots still plot in color.Is it possible to configure a .stb file to plot in only black?
my DWG is set to monochrome.ctb. Everything prints ok except my 2 isometric 3D viewports which prints in its real color (visual styles are conceptual). Why don't they print also in monochrome? I saw a couple of discussions on that problem but the "hidden" and "hidden 3D" options in shade option isn't working...I want them to stay the same, just print in monochrome with screening! I read about some option called "hidden legacy" but can't find that anywhere.
View 2 Replies View RelatedI am using the monochrome plot style and plotting to PDF. My text looks great in the Plot Preview, but once actually hit 'Plot' the line weight of my text and dimensions appears super thick and heavy. They are also assigned to the lightest line weight in the layer property manager.
View 9 Replies View RelatedI've the same problem: in autocad Architecture 2011, in "plot style table", there is no "monochrome.ctb". Just mentioned "none" and "new"; How I can put in monochrome into the plot style table?
View 6 Replies View RelatedI have produced a 3D model drawing in Autocad 2006, then opened three layouts. When I plot the first layout in monochrome it actually previews in monochrome. However, when I plot the other two layouts with the same settings, from the same model, with the same layer assignments, they preview and plot in colour.
View 9 Replies View RelatedWe frequently publish drawings to PDF files. However, we recently noticed that when we publish to the PDF file in monochrome, all hatching publishes in color.
We need the entire PDF in black and white, but I can't figure out what settings I'm missing.
Using autocad 2013 and if I choose plot and do dwg to pdf and choose the page setup I want which is landscape,Plot area limits,center plot and fit to page with monochrome pen. then my drawing turns into a pdf just fine.
I am tring to print a drawing set of electrical drawings using the batch plot and I am getting them to plot to pdf as a all drawings in a single file and all drawings as individual files but I don't see a way to set it to monochrome when using the batch plot and all my draings are plotting with the layer colors.
How can I change the batch plot to use monochrome?
exported all my user files and plot files and profile into new version of autocad 2013
now when i print a document instead of getting a monochrome plot setting it gives a greyscale affect even though using the monochrome plot file
obviously checked the plot file to see if its set correctley
this has occured on more computers around the office which is making me think it might not be the autocad
Having problem with the monochrome .ctb plot style table not showing up in the plot dialogue for AutoCAD Architecture 2010? Typically it seems to be standard upon install of the software.
View 6 Replies View RelatedI've noticed with other people's drawings, that when i print them in Monochrome, the logo of the company stays in colour, i don't know how to do it.
View 9 Replies View RelatedMy problem is that all of my dimensions and text have changed colour to white, with my by layer colour as an outline of the text, the arrows and lines still look correct however. I put the dimensions on a seperate layer and this seemed to happen after hiding this layer then later unhiding it. I have looked through the properties to change the colour unsuccessfully.
On another note, the monochrome print option does not work when creating a plot - it will still create it in colour. What can I do to sort these issues? It is fustrating as all I really need to do with this drawing is to export the it for a report and it looks messy!
ACAD MEP 2012..Yes all the typical settings are correct.I have a 2-d drawing with 4 viewports, 2 of which will not print Black & White? Thought it might have to do with visual styles but changing them had no effects.
View 3 Replies View RelatedWe have experienced what we think is a bug in AutoCAD 2010's printing. We are running A2010 with Update 1 & 2 installed. Same issue on both x32 & x64 hardware.
Each project is setup with a title block xref'ed into the sheet (quite common method).
The Title Block xref generally has images loaded & therefore the image is a child to the sheet file when the TB is referenced in.
We have used this method for about 15 years across most versions of AutoCAD with no issues before now.
Now on AutoCAD 2010, when we print the sheet, the xref'ed TB images print black & white, rather than color. However if we use AutoCAD 2008 with same pagesetup/ctb/pc3 etc, we get the same print, but image is colour (as we would expect & want).
This leads us to think that there is some issue in AutoCAD 2010 with xref'ed images & how they are treated when plotting.
To complicate matters further, if we bind the title block, thus making the image embeded within the sheet, the images now print fine in full colour.
So, if a image is loaded via a xref'ed dwg, it plots in Black & White. If image is referenced into live sheet (not via xref), then it plots in color. All other xref'ed linework prints as expected (defined by ctb).
Is there any new variable which manages the colour printing of the image in A2010 which we are not aware of (that didnt exist in A2008)?
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
AutoCAD - Why does the Normal plot style plot in color? Black seems to make a lot more sense. Almost everyone in Architecture uses black prints most frequently so that should be the default. And you can't adjust Normal to all black. So what was AutoDesk's reasoning?
View 9 Replies View RelatedI have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
Having a problem with AutoCAD 2012. When trying to plot the dwg, suddenly this message come up. Even after install Service Pack 1, it still doesn't solve the problem. Attach is the image for your reference.
I've tried to search for the solution but cannot find any with StackHash_f960.
Is it possible to plot using a few different .ctb files? For example can I assign one .ctb file to the landscape xref drawing and another .ctb file to the architectural xref drawing and a third .ctb file to the civil xref drawings? It has been very time consuming to coordinate all the separate drawings to use one .ctb file.
View 2 Replies View RelatedI can not plot in color! Using Civil3d 2012 64 bit. Plotting to a HP DesignJet 5500 which I think is set to use the new driver for 64 bit. I have tried everything I know. Been doing this many years and I have never ran into this one. Used CTB ACAD, None and tweaked a few of my own. The funny thing is if I have an image that will plot in color and the other funny thing is I can send the same plot to a HP Color LaserJet 5550 PS (standard office size) and the dwg plots just fine in color so I'm thinking it has something to do with the 64 bit side of things.
OS=WIN7
I am trying to plot over 100 drawings to PDF. They are mechanical drawings and the details need to be clear. I tried a batch plot, but when printed in 11x17, everything is a bit fuzzy on the PDF. I tried a PDF convertor, and it was very clear, but it put a large, "Free Trail" logo in the center, ha.
View 7 Replies View RelatedI have an file where the linetype of a line will modify on print. The linetype will only 'move' when the endpoint of the line is outside the viewport.
I have attached a pdf to show what is happening along with the drawing file.
Another interesting thing is that when I change thickness of the linetype, it also moves.
I have tried recreating the polyline, reversing the polyline direction, auditing the drawing, but nothing.
I'm tring to plot 26 or so sheets into a single pdf or multiple pdfs and I get this error every time with no file being created.
Job: - Canceled
Job ID: 1
Sheet set name:
Date and time started: 5/3/2011 11:48:29 AM
Date and time completed: 5/3/2011 11:48:33 AM
UserID: RGDC99
Profile ID: AutoCAD MEP (US Imperial)
Total sheets: 2
Sheets plotted: 1
Number of errors: 1
Number of warnings: 0
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ALERT.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Plotted with Error(s)
File: Z:\_xxxxx\_xxxxx2011 ProjectsxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
ERROR: Internal Error: Null Pointer
[IMG]res://C:Program FilesAutoCAD MEP 2010AcPltRes.dll/ERROR.GIF[/IMG]Sheet: P-AIR-# FAB-AIR-1 - Error(s) Did Not Plot
File: Z:\_xxxxx\_xxxx2011 ProjectsxxxxxxxCADP-AIR-# FAB.dwg
Category name:
Page setup: pdf
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: Z:\_xxxxxx\_xxxxx2011 ProjectsxxxxxxPDF'sOUTBOUNDxxxxP-AIR-# FAB.pdf
Paper size: ANSI full bleed A (11.00 x 8.50 Inches)
I have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?
View 9 Replies View RelatedIs there a limit to how many drawing files one can send when using the publish command? Using ACAD 2010.
View 1 Replies View RelatedI have been trying to plot as a PDF an isometric view from CAD. I am using CAP Studio for these 3D symbols and for some reason even though I have monchrome.ctb selected under Plot Style Table my PDF is printing in color, not all black.
View 9 Replies View RelatedAm configuring many page setups and when printing/plotting there is a checkbox to scale lineweights. Was wondering what the consensus is on this. Should the check scale line weights box be checked, or not?
View 5 Replies View Relatedi want to know how to enable those options for shaded plot.
View 1 Replies View RelatedEvery time I try to print or preview the following error appears and no error code or log comes after.
I already instaled SP1, changed acad.ctb e use other templates.
new at autocad 2012 (previous CAD07 user)im having trouble setting up my page, never had a problem with this before..... i need an A4 scaled drawing in paper space.
my current setup....
paper size: A4
plot area: extents, ticked centre the plot
scale: 1:1
the result: titleblock cut off on left and right sides
its only when i need A4 size (red margins!) A3, A2 etc are fine....i dont know what else is needed? I installed CAD12 only a few days ago and im the first and only AutoCAD user at my work. Im not sure if there's some intial setup settings that are required.
Last week we started having an issue with one of the AutoCAD 2010 installs, When she would go to plot (to any plotter or PDF) the plot process would just hang up and continue to show (in the lower right corner) that it was working, sometimes it would actually print the page but it wouldn't format it right, This morning a second install started doing it too. I chacked and ran though the proceedure for ACAD.VLX virus and it still is doing this. After autocad sits there for a minute showing the plot process the addons reload. I have tried plotting with no addons loaded and I am still getting the same problem.
Machine software config:
Windows 7 64 bit
Autocad 2010 32bit loaded
Microvellum 6.7 addon
I have drawings with annotation and when I send to the plotter the processing is very slow, and take some time to plot.
View 1 Replies View Related
