AutoCAD 2010 :: Error When Trying To Plot Or Preview
Mar 6, 2012Every time I try to print or preview the following error appears and no error code or log comes after.
I already instaled SP1, changed acad.ctb e use other templates.
ADVERTISEMENT
AutoCAD 2010 :: Crashes With Plot Preview
Feb 21, 2013When plotting and doing a 'plot preview' Acad crashes. This happens with ALL dwgs no matter which of our 2 printers is chosen. This is only happening to one computer in the office. All computers are running Windows 7 Professional with AutoCAD Civil 3d 2011. If the plot is sent without a preview everything if fine with no crash.
View 4 Replies View RelatedAutoCAD 2010 :: Stuck In Plot Preview Loop
Oct 26, 2009AutoCAD 2010 SP2:
Upon setting up a drawing for plotting (the problem is not printer specific) the "Print Preview" gets stuck in a loop where I am unable to exit if I choose to cancel or alter the settings. I am forced to go ahead and send the plot. If iI immediately go back and run the PLOT command again nothing happens... no dialog box, no error nothing. I must then go to any other open dwg, do a save, and then go back to the original dwg. Then the PLOT command will again work, however, still getting stuck in the preview loop.
AutoCAD 2010 :: Blank Page When Plot Preview And Export To Pdf
Oct 3, 2013Excuse my awkwardness but I'm self taught on AutoCAD & have managed fine for last few months but have encountered an issue this evening I can't resolve. I've produced drawings, basic they may be, but when preview them the actual drawing area is barely noticable & when export to pdf it practically prints a blank page. I have very simple items in drawing, stockpiles, excavations test locations, and have been producing pdf's fine, even as recently as this morning using the same cadfile. But what ever I've managed to do since then has changed something and I can't resolve the issue.
View 6 Replies View RelatedAutoCAD 2010 :: Disabling Plot Style Table Preview In Viewports?
Jul 9, 2013For some reason, my plot style is applied to my viewports. So for example, when I choose a monochrome plot style for the layout, the view ports in that layout display in black and white. I want to disable this. Is there a system command to turn this off?
View 2 Replies View RelatedAutoCAD 2010 :: DXF Files Open Fine But Plot Preview Has Extraneous Lines
Mar 12, 2013I have a collection of dxf files that open fine, but the plot preview (and the plot) has extraneous lines in it. Any way to clean up the plot image?
View 1 Replies View RelatedAutoCAD 2010 :: Getting Error When Plot DWG
Apr 17, 2012Having a problem with AutoCAD 2012. When trying to plot the dwg, suddenly this message come up. Even after install Service Pack 1, it still doesn't solve the problem. Attach is the image for your reference.
I've tried to search for the solution but cannot find any with StackHash_f960.
AutoCAD 2010 :: Plot Style Wizard Error
Jun 2, 2011OK, since installing autocad 2012, and installing the office profile, which directs to a folder on our server to our plot style folder. Fairly typical medium office setup where settings come from an AutoCAD Settings folder, from support, fonts CUI etc etc.
There is the plot style wizard shortcut in this folder. In past releases this has been ignored, however now every time you open a new drawing we receive the error prompt, "The following shortcuts in the search were invalid and ignored" and then indicates the file path location. What's the deal?!
Now while i shouldn't have to, yes i have simply attempted to delete the shortcut in question but it showed up again.
AutoCAD 2010 :: 3D Drawing - Print Preview Fatal Error
Jan 31, 2012I have a medium size 3d drawing that displays the following error every time i click "Print Preview"
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
with both "0x000a" and "2653281h" not always displaying the same values. Other 3d and 2d drawings preview with no problems, and i can navigate and make changes in the problem file without any errors.
AutoCAD 2010 :: Ribbon Error In 2012 With Windows 8 Consumer Preview
Mar 31, 2012Ihave windows 8 consumer preview and i installed autocad 2012 but when i open autocad 2012, ribbon dont appear, when i write the command ribbon but appear a message like this " Unhandled exception has ocurred in a component in your application. If you click continue, the application will ignore this error anda attempt to continue.
Common Languaje Runtime detected an invalid program"
In Attachment , i put the image of the problem....
AutoCAD Civil 3D :: Station Ticks Display In Plot Preview But Do Not Plot
Nov 29, 2012I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
AutoCAD Print / Plot :: KIP 3100 With 2011 Heidi Driver Crashes Upon Plot Preview
Sep 1, 2011AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
AutoCAD Print / Plot :: How To Plot (or Do A Preview) With HP LaserJet 1525
Aug 29, 2011When I trying to plott (or do a preview) with HP LaserJet 1525 nw configurated, autocad crashes. I have the latest drivers and updates installed Autocad 2011 64bits (sp2) on windows 7 64 sp1
View 1 Replies View RelatedAutoCAD Print / Plot :: Plot Preview Causes Crash
Aug 17, 2011I have a coworker who is having trouble printing from AutoCAD 2011 (sp2) on his Dell Latitude, Win 7 64 box. Whenever we try to print or even do a print preview, it will crash the program
He has tried several printers and uninstalled and reinstall the drivers for them. Tried uninstalling and reinstalling the program as well.the Windows Application event viewer shows this when AutoCAD crashes.
Faulting application name: acad.exe, version: 24.1.208.0, time stamp: 0x4dbf9c16
Faulting module name: ntdll.dll, version: 6.1.7600.16695, time stamp: 0x4cc7b325
Exception 0xc0000374
Fault offset: 0x00000000000c6ab2
Faulting process id: 0x28c
Faulting application start time: 0x01cc5c6016a04e15
Faulting application path: C:Program FilesAutoCAD 2011acad.exe
Faulting module path: C:WindowsSYSTEM32
tdll.dll
Report Id: dcb31b1a-c853-11e0-a254-463500000031
Also, I have trouble remoting into his laptop because it will not display correctly with our Landesk software. So I'm wondering if this is a display problem rather than a printing problem.
AutoCAD Print / Plot :: Corrupt Preview And Plot
Oct 1, 2009When attempting to print drawings that have been printed before...much of my drawing will print but many lines and blocks will not show up in preview, or print. i wonder whatt he problem is, as there are some lines which have exactly the same properties (ie on the same layer with no overides etc). where some will print but others wont (ie on the same layer etc). A similar problem persists where some xrefs show in preview and others don't.
Also the stuff in layout space is part there and part not, where this layout title block etc is standard for all drawings and has always printed fine.
It seems the only way to solve it is to copy everything into new drawings (including xrefs) and start again....? I have checked layers, no print etc...
AutoCAD Print / Plot :: Print / Plot Preview Shows Section Of Drawing
Jan 20, 2012I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies View RelatedAutoCAD 2010 :: Plot Thin Lines And Dots When Plot Transparency Option Is On
Feb 6, 2012I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
AutoCAD 2010 :: Why Does Normal Plot Style Plot In Color
Oct 9, 2013AutoCAD - Why does the Normal plot style plot in color? Black seems to make a lot more sense. Almost everyone in Architecture uses black prints most frequently so that should be the default. And you can't adjust Normal to all black. So what was AutoDesk's reasoning?
View 9 Replies View RelatedAutoCAD Map 3D :: Output Plot Not Showing Up In Preview
Apr 12, 2012I'm having a plotting issue with one of my drawings. It's not showing up on plot preview, or even when I print it.
Any other drawing I create under the same Page Setup print fine. The paper and viewport have been have been set up for a standard 8x11, and drawing appears in as normal in the viewport. The layers are ok with no attributes (i.e transparency) set as to affect the print output. The printer drivers are up to date, and really doesnt make sense as any drawings I create under the exact settings show up normally and print out with no problem. Really don't want to recreate the drawing from scratch.
AutoCad :: Rotated Text In Plot Preview
Nov 19, 2012in ps my text looks fine,. but when i go to preview for plotting its rotated 90 deg.
View 1 Replies View RelatedAutoCAD 2013 :: Plot Preview Mode
Dec 11, 2012I have a site drawing which has a decently high resolution satellite image underneath. When I try to plot to a pdf, the underlying satellite image doesn't show up. In the plot-preview mode it does show up, but not in the actual pdf created.
View 5 Replies View RelatedAutoCAD Map 3D :: Print Preview And Plot Doesn't Work
Sep 27, 2011I'm using AutoCAD Map 3D 2009.
I've created a simple drawing in CAD that contains a cropped JPEG, a two toned hatched polygon in behind it two MTexts overlaying all.
I cannot view them in either normal plotting, pdf format, jpeg format and even dwf.
I've increased the ram used in the "Raster Extension Options" (2000 MB), I've set the plotting in the "Process Document" to "...In computer", I've saved it in older formats (2000/2004/2007), I've placed the drawing on both our public drives as well as the local, I've adjusted the "Raster and Shaded/Rendered Viewports" & "OLE" settings in the "Device and Document Settings" (None to Best). Not to mention the other variations in the plot menu.
I've tried everything I can think of and have read through several threads here and nothing works.
What drives me nuts about this, is that I'm able to print from a layout with no problems a 3D drawing, with 2D hatching, an extensive title block with hatching and a secondary overall viewport (minimal detail) in the main viewport area.
AutoCAD Architecture :: PDFs Don't Show Up In Plot Preview
Apr 24, 2013I'm running Autocad Architecture 2013. My .dwg has about 15 pdf's in it (from a consultant that does hand drawings that I scan in, and use the image manager to insert into my drawing). The PDF's range from under 1mb, to 10mb. The PDFs are in model space and within my various drawing sheets, I show them in my drawing sheets via multiple viewports. I noticed that when I go to plot a sheet that has pdfs shown in viewports, and click on PLOT PREVIEW, the PDF's don't show up - everything else shows up, linework, jpegs, etc, but not the PDF's! I fiddled with the viewports and noticed that if some part of the PDF's image frame was visible in the Viewport, the PDF would appear in Print Preview. But if the viewport sat directly over the PDF's image frame, the PDF would not show up in the Plot Preview!!!
Could it be I've exceeded the maximum number of Viewports in my entire .dwg? (I have about 16 sheets), Or, could it be some mysterious autocad system variable that I'm running up against.
AutoCad :: Drawing In Viewport Not Visible In Plot Preview?
Apr 19, 2012I'm creating a new project drawing and have x-ref'd my base drawing onto the sheet to be plotted. I can see the base drawing thru the viewport while in layout, but once I try and preview my plot the drawing inside the viewport is not visible. that is, I can see the preview of my sheet border & title block, but nothing within the viewport shows on the preview screen.
View 3 Replies View RelatedAutoCAD Civil 3D :: Odd Radial Lines Showing Up In Plot Preview
Aug 23, 2012why I get these unusual radial lines showing up in my plot preview. The drawing looks fine on the screen but when I go to plot I get hundreds of lines that converge to a point in my preview.
View 5 Replies View RelatedAutoCad :: Print Preview / Plot Blank Pages With Viewport
Apr 8, 2013Using ACAD 2008, I am having an odd problem where when I print preview/plot this drawing with a viewport the result is a blank page but when I remove the viewport it plots fine.
View 0 Replies View RelatedAutoCad :: How To Plot Drawing Only Takes Up 2 / 3 Of The Page On Print Preview
Oct 18, 2012When I try to plot my drawing, my drawing only takes up 2/3 of the page on print preview. The top half of the page is blank. How can I make my drawing take up the whole available page?
View 9 Replies View RelatedAutoCAD LT :: PDF Print From Paper Space - Slow Preview Then Will Not Complete The PDF Plot
Sep 20, 2013Have a dwg with two layouts sheets that print to pdf in paper space - one layout works just fine the other NOT.
Both include one view port and a few small details as pdf underlays(@ 150 kb each) in the PAPER space layout.
The problem sheet - ran a very slow plot preview but it did complete a full view of the layout, then when selected to do the plot it never completes the pdf.
I tried a pdf plot of the same area in MODEL space and it previews just fine and plots to a pdf just fine.
AutoCad :: Grey Or Coloured Lines On Screen Plot In Black Even In PDF Preview
Jun 18, 2011the grey or coloured lines on screen are plot in black, even in the pdf preview. How can I obtain the chosen colours?
View 3 Replies View RelatedAutoCAD 2013 :: Fonts Shows And Print Different In Windows And Plot Preview
Nov 28, 2012I am facing this problem that when i give plot command and preview the window it show fonts different other than my main window. Also it prints as per the preview window and not as per the fonts present in my AutoCAD model space and layout.
View 1 Replies View RelatedLightroom :: Error Message On Opening - Error In Reading Preview Cache?
Mar 26, 2013 have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.