I have underlayed a DWF drawing in AutoCAD and I'm looking for a way to manage the the lineweight while printing.
I have try many settings but the lines from the DWF come out very thin, probably the thiner that AutoCAD is able to provide.
How to add and delete a “lineweight” from the lineweight list?
I’m wondering if there is a way to add and delete lineweight from the lineweight list?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Im trying to print a logo for my detachment using Autocad to PDF but for one the line dont show up in the PDF file and second the original color of the drawing is faded. Black goes to a smoke grey color, lines dont show up, and the red is blurry. I need this to be fixed but I just dont have the skill to do it. And stupid autocad doesnt have a contact number for step by step instructions with an actual human! Im trying to use the logo for a T-shirt but it seems like I cannot for the life of me print a suitable digital image for it. I am using AutoCad ARCH 12...
View 4 Replies View RelatedUsing AutoCAD 2011 we always use 0.00 as our default line weight but the default will change to 0.010 with no real pattern. It can be any drawing at any time. We have reset this dozens of times without being able to stop it from reoccurring.
We are also not able to get line weight to display (yes we check the Lineweight Settings, Display lineweight box) again on random drawings at random times.
I only do photo quality prints to Epson matte a few times a year so I run test prints with various settings to get what I want. My granddaughters wanted some prints from a web site framed and my wife wanted prints of an emailed photo of their old mountain cabin. I had to do some color manipulation of the cabin, but the web site images had been expertly processed and all I had to do was print properly.
I experimented with the cabin image print settings. Epson changed the names of all their papers, so the Epson print profiles in the print dialog didn't match the name on the matte paper box. I deciphered that, but I wasn't happy with the result so I tried two of the other Epson profiles and hated it. There's quite a long list of profiles available, some specific, and some just conventional color spaces like sRGB, aRGB. For the heck of it I tried Pro Photo RGB as a printer to paper profile. The print of the cabinimage with an embedded aRGB profile was everything I could want. I did the web site sRGB images the samwe way and they were really nice.
The puzzle is this: What does using Pro Photo RGB as an instruction to the printer cocerning what it is printing to thru Photoshop even mean? The printer has never heard of the colors possible in Pro Photo, and the source image is in sRGB ( verified by Photoshop). I can conceive that an RAW image should be rendered as aRGB for inkjet and that the inkjet has some blues that are outside the aRGB, but I can't understand telling an inkjet to use Pro Photo to print sRGB.
Setting a lineweight for the dimension objects,As the dimension object contains: text, dimension line and extension line and behaves as a block, then why the arrowhead (oblique) of the “dimension line” doesn’t follow the lineweight chosen for all the dimension objects?why the "arrowhead" (oblique) is thicker than other dimension elements?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there a way to set the “lineweight” to be Color-based automatically?
I’m wondering if there is a way to set the lineweight to be color-based such that all the objects have the same color will take the same lineweight automatically.
Sure, we can control such behavior through the “bylayer” feature but I’m not sure if this very particular behavior might exist in the AutoCAD; color-based lineweigth!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Every time I reload the xref, regenerating the drawing or plot my details, I need to wait a long while. I have a plan (dwg) and the details (dwg) where I xrefed the plan 6 times. Everything is purged and audited. i thought this is a good way to work. Some tips how to manage with xrefs.
View 3 Replies View RelatedRight now I am working on a Win 7 64 computer and have a Canon MP810 printer. I read the materials on color management and set my color management in "Print" in Lightroom 4 to "managed by printer". My printer color management in advanced settings is set all to defaults. When I print a photo from Lightroom 4, there is a distinct magenta cast to the entire photo, but it's most observable in midtone neutrals. A burnt out section of a lightbulb goes white, for instance, but greys seem to go pinkish, greens to a rust, etc. I also printed the same photo from a windows file, using Windows 7 print mode. That photo seemed to go slightly magenta in the neutrals but not nearly to the same degree. what I might try or test to see if I can get my print colors more accurate?
View 3 Replies View RelatedI am trying to use the PDFCLIP command to clip an underlayed PDF. The problem is, I am trying to clip multiple sections from this PDF and am struggling to do so. I select the underlay, select Create Clipping Boundary, select the polyline I want to use and invert it and it clips out the area. When I try to do this again, it won't let me keep the existing boundary and create another one. It seems like I can only crop one area at a time?
View 1 Replies View RelatedI have an xref in my drawing. I am trying to use a VP override to make a layer plot with a lighter lineweight. I have changed the layer to number 9 (set to plot light) in the viewport and the layer changes color. When plotting the layer does not plot with the correct lineweight. The object color on the layer is set to bylayer. Visretain is set to "1" What is wrong? Why isn't the layer plotting correctly?
View 9 Replies View RelatedI have been searching for a solution to better manage xrefs. We work with arch. dwgs and they often contain several nested xrefs. While working in our "base.dwg", I need a method to correct the problem of some layers in the xrefs from displaying in the base.dwg when they're frozen in the xref dwgs. VISRETAIN is at 1. What I'm having to do is click on the problem geometry, identify what xref it's in, open that xref to record the layer state(all the layers that should be frozen or thawed), go back to the base dwg, look in Layer Manager to indentify that xref's layers and freeze the layers I need frozen. However, if I open the xref all those layers that should be frozen ARE frozen, but back in the base dwg they are displayed (not frozen). It's very frustrating...espec. when you've got half a dozen or more xrefs in many of their dwgs; which are all multiplied in the base of course so I've got two dozen or more xrefs to sift thru. It's just such a pain. I guess I need a "tip" on how to properly manage xrefs.
What would be neat is to be able independently manage all the Layer States for the xrefs separate from the base dwg's Layer States--meaning they(the xrefs' states) DON'T affect the other layers in the base(or other xrefs). LS Manager lists all layer states and if you restore one of them, it affects the entire dwg. I don't want that. I want the Layer States to control ONLY those states that apply to the xref it was created in. That way, all I'd need to do is click on the xref in Layer Manager(from the base dwg) and restore that particular xref's layer state and be DONE. That way you could manage all your xref Layer States individually (and independently from) the base dwg. Thus, if you make changes in the xrefs you can easily save/restore those states from within the base.
We are having a print server in which HP DJ Z6200 printer is attached and shared. Nearly 200 users (with Win 7 64bit) are using this plotter. There are few other HP plotters also attached on this print server.
While trying to print any drawing from this HP DJ Z6200 printer, AutoCAD is showing below mentioned error -
None:This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the evice can not be found or the device has a problem. The none plot device has been substituted.
After several googling & digging into the AutoCAD forums I have found that we need to create .PC3 file for this plotter. But while trying to do so, getting the same error message as mentioned. But from the same system, with any other application (MS Word, Excel, Acrobat), we are able to print on the same plotter. After several tryout, we have managed to create a .PC3 file from an Windows XP system. By copying that .PC3 file to affected system, printing is working fine. But its a work around for us as its very difficult to copy-paste .PC3 file for all the users (around 200 or more from different locations).
I am using 2D-AutoCAD, and trying to plot a drawing on a printer, the drawing is different colors and I want to print it black on white paper, I am unable to select the proper .ctb file from the Plot Style Table pulldown, it does not show up? I have plotted other drawing sets using this method but for some reason cant do it on this particular set.
View 3 Replies View RelatedSo my pluming layer is on and "no plot" is NOT selected, yet when I plot, it does not show up? It was working fine last week and i don't think has been saved since then. Also, the xref prints on other sheets, except this one so i'm thinking there is a difference in the page setup but I dont see any discrepancies.
View 2 Replies View RelatedI am having an issue printing to scale. When I print my drawings, the scale is about 4" over 100' out of scale (short) All of the settings are correct for plotting. This happens whether we print directly or to a pdf first. I know it is not just the plotter as I have tried three different printers with the same result. Also, I know it is not AutoCad as we are having the same issue printing from Microstation. I
View 9 Replies View RelatedI have lots of DWG files which I would like to convert to PDF. I guess this is not difficult at all with Scriptpro. However, I would like to know how to: Include in the script file (.SCR) a .CTB file so that the print is made in that way.
Create a Job so that Scriptpro runs once a day over all the .DWG files located in 1 directory. Is all these possible? I can use either Windows XP 32 bit, Windows 7 32bit and Windows 7 64 bit. My version o Autocad Mechanical is 2011.
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting.
Actually on one of my draughtsman's computer, when he hits Ctrl + P, he is unable to see DWG to PDF option in the drop down menu, have I fortgot to install some feature because for rest of my draughtsman they all are getting that option.
View 3 Replies View RelatedI'm trying to print / plot a drawing which has a mixture of 2D plans and 2 3D views. I have the drawing set-up with viewports in paperspace. The objects in one of the 3D views prints perfectly, yet some of the linework from the second 3D view won't print.
View 6 Replies View RelatedACAD MEP 2012..Yes all the typical settings are correct.I have a 2-d drawing with 4 viewports, 2 of which will not print Black & White? Thought it might have to do with visual styles but changing them had no effects.
View 3 Replies View RelatedWe are using autocad map 3d 2012. and autocad 2000. when printing an old drawing made in autocad 2000 with version 2012 the bmp files that we inserted are printing pixelated almost like a digital camo would look. if we go back to 2000 they print fine. we are using a canon ipf710 printer/plotter.
View 7 Replies View RelatedI reloaded my CAD and now I have a black background in paperspace. This is what I want but I want it to print white while haveing a black backgroud for drawing. How do I do this?
View 3 Replies View RelatedI am currently using a laser printer that is reliant on the thickness of lines and objects in my AutoCAD file. I made a plotter tool file, laser.ctb, that is meant to control the default thickness of drawn lines. How do I know whether the .ctb file is being used by the printing interface?
View 1 Replies View RelatedWhen printing in AutoCAD 2011 when using the "DWG to PDF.pc3" printer, many lines in the resulting PDF are faded while others appear fine. I can zoom in and all the lines appear with the same weight. There are multiple layers on the drawing but all contain the same line weight and lines on the same layer appear with different weights.
This occurs on all AutoCAD files and all users. I have tried changing pin assignments with no success. Printing directly to Adobe PDF does not result in this issue but with each sheet of drawing being a different file this process uses a lot of time.
Whenever I try to do a print with a Visual Style of "REALISTIC" I get the following message, the numbers may change but it's always has the same outcome the program crashes and I have to restart the program.
So far, through trial and error it only appears to happen when using "REALISITIC" the other styles do not crash the program, at least not yet.
[Side note: may not of tried everyone yet.]
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
Running AutoCad 2012, with CadPipe 12.5. Printing is being sent to network printers and plotters, doesn't matter which one I send to, it will crash everytime.
Using AutoCAD 2010, and I'm having problems printing with one dwg, that I've had to copy an Excel Spreadsheet into. The spreadsheet was created with Excel 2007, and has quite a bit of text in it, and I'm trying to print it on an E size sheet, to an HP Designjet 4000. AutoCAD hangs up each time I try to print this, and my computer gets a message indicating that I'm low on disk space, even tho I do have plenty of space. It's like Autocad is taking more resources than it normally should. How I can insert this spreadsheet into AutoCAD and be able to print it? I've inserted the spreadsheet in model space, and the titleblock/border is in paperspace. I've tried printing to pdf and exporting to other formats to see if that will work, but AutoCAD keeps hanging up. Any other AutoCAD dwg works fine to print to the printer. It's just this one file with a spreadsheet inserted into it.
View 5 Replies View RelatedWe are running Autocad 2012 on Windows 7 and printing to an HP5200 via server mapping in three different labs.
Had a similar problem before and changed the printer drivers from Universal back to PCL5. Since Christmas however this problem seems to have come back. We haven't changed anything. Wondering if maybe there were patches or something that affected this?? When we preview or send a print job Autocad just greys out and crashes. I do know that if we configure the computer to print via TCPIP it also works fine but this is not ideal with the number of computers and students we have.
Another thing we seemed to have noticed is that we don't have this problem with all printers but more oddly we noticed that when we change the default template some templates work and some don't.
By default we are set up to use the acadiso template as we are using the metric system - we can't get anything to plot using this. If we start with the standard acad template we do not have this problem. We have tried plotting a simple circle or a more complex drawing with the same result. The sample files plot fine but I'm guessing they were likely not done in metric...
Using either Universal Document Converter for JPEG, or Adobe Acrobat 9 for PDF, AutoCAD 2011 (suddenly and without warning) started truncating 15~20 character filenames to 3 character filenames when printing.
It used to plot to the complete filename, swapping the JPG or PDF extension for the DWG extension, until last Friday.
I've been playing around with the print options for a while here, and can't seem to figure this out. I want to print multiple view ports on one page.
View 7 Replies View RelatedI'm trying to print out a Layout in Autocad 2012 but the edges of cylinders either go faint or disappear completely.
This happens when using both PDF and normal printers. If I look at the layout in Print Preview all the lines are there in full. Attached is the result of a PDF print.