Lightroom :: Manage Color Printing To Remove Magenta Cast?
Dec 4, 2012
Right now I am working on a Win 7 64 computer and have a Canon MP810 printer. I read the materials on color management and set my color management in "Print" in Lightroom 4 to "managed by printer".  My printer color management in advanced settings is set all to defaults. When I print a photo from Lightroom 4, there is a distinct magenta cast to the entire photo, but it's most observable in midtone neutrals. A burnt out section of a lightbulb goes white, for instance, but greys seem to go pinkish, greens to a rust, etc. I also printed the same photo from a windows file, using Windows 7 print mode. That photo seemed to go slightly magenta in the neutrals but not nearly to the same degree. what I might try or test to see if I can get my print colors more accurate?
View 3 Replies
ADVERTISEMENT
Aug 1, 2012
I have just moved to LR4.1 from a bridge/PS6 workflow. I am having issues with the prints having a magenta cast. I have a colour managed workflow (Eizo ColourEdge monitor, Datacolour calibration, Epsom R3000 using paper manufacturers icc profiles). The magenta cast is happening when printing through LR4 using the papers icc profile. Same file is fine when printed with the same profile through CS6.
View 2 Replies
View Related
Nov 23, 2011
My Nikon D7000 raw files all have a magenta cast to them when imported into Adobe Lightroom 3.5, and I wasn't shooting on multiple exposure. I am running Windows 7 64-bit, and have Adobe Photoshop CS4 as well as a trial version of Adobe Lightroom 3.5 (testing to see if I would like to buy as I can't read my raw files in CS4).
Â
If I convert my raw files to DNG, and then view them using camera raw (CS4), the magenta cast is gone. However, if I view those same DNG files with Lightroom, they have the magenta cast. I have tried re-importing my catalog, but every time they all have the same strong magenta cast.
View 5 Replies
View Related
Oct 29, 2012
LR4.2 gives some ugly magenta color cast on deep shadows especially at high iso pictures. Nikon Capture NX2 gives them too, but not so heavy. If I push the shadows at iso 1600, they are all magenta. Is it related to the beta state of the D600 support? My D700 is at iso 3200 in deep shadows completely black (only luminance noise), even pushed. Is there a possibility to correct that issue with LR (high iso blackpoint correction)? The shadow color tint correction from the calibration option is not really a solution, because it does not only correct the deep shadows, so the other shadows get a green tint.
View 15 Replies
View Related
Mar 7, 2014
Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast. WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync. I used to have an espon 2400 which worked just fine.
Â
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
View 7 Replies
View Related
Sep 18, 2012
I had incurrect setting when taking some pictures, which turned the pictures blue. Is there a way to correct this in Elements 9?
View 5 Replies
View Related
Nov 13, 2013
What is the keyboard shortcut for remove color cast and for brightness/contrast?
View 1 Replies
View Related
Mar 22, 2013
The colors on the computer monitor do not match the colors of my printed photos. The pictures have a yellow color cast. I am printing using HP Photosmart 7520.
View 1 Replies
View Related
Oct 31, 2011
I used the Lightroom beta 3.5 beta with CR 6.5 beta and now have installed the update of these two products. In beta I was able to open Phase One IQ raw files just fine but now with the 3.5 release I obtain a funny Magenta color cast that displays in the Library Mode and thumbnail but does not display in the Development Mode. This happens on both my Mac Laptop and workstation. Mac OS 10.6.8. I have not yet tried uninstalling LR and reinstalling, will do that next. The first image is in the Library mode after I have opened the file. The second is from the Development Mode. Notice how the tumbnail at the bottom remains constant but the small image on the left has changed in the Development mode to its natural look.
Â
I should say that this color cast happens after I adjust the temperature settings of the image, not just from mearly opening it in Development.
View 2 Replies
View Related
Sep 29, 2013
The fresh install of LR 5.2 renders all images - RAW and JPG - throughout the program with a very dark, green-yellow colorcast. The only place where images appear normal is in the Import dialog, while the thumbnail mode is active. Apart from that, every program module features this annoying reproduction. Here are some supporting screenshots (red rectangles are from me):
Â
Import screen - thumbnail view - OK:
Â
Import screen - preview - NOT OK:
Library view - NOT OK:
Â
Strangely enough, if I export the picture to JPEG - without any modifications - the image appears normal again:
 LR version: 5.2.1, 64b (tried the 32b version too, same error)
OS: Windows 8, 64bit
Camera: Canon 40d, imported images are RAW.
View 2 Replies
View Related
Jan 25, 2005
I have some photos that have an orange cast that I would like to remove. May also need to lighten them a little, unless removing the orange does that. Are there any tutorials that would tell how to do this? Or if it is easy enough, give some guidance here?
View 3 Replies
View Related
May 16, 2007
I'm trying to make a .tif of an image
I'm running a Mac OSX with Photoshop 7.0 and QuarkXPress 7.2, and so I tried deleting the cyan and yellow channels in photoshop. This forces me to save the Photoshop image as a DCS 2.0, thus incompatible with Quark (has to be in a .tif).
Making a monotone of the image makes the entire image magenta (and duotone isn't much better), but I'm trying to have the film reel tape as magenta and the top part of the tape be black.
The hue/saturation was very easy to make the tape into magenta from red, but printing is another issue.
View 4 Replies
View Related
Aug 9, 2012
When 4-color process printing (CMYK), how might one remove the black plate from the process, but maintain the same "shade", or very close to, of all process colors?
 Â
Top swatch is the original. Bottom is the closes I could get while keeping Black at 0%.
View 4 Replies
View Related
Apr 7, 2012
how is best to remove the Colour Cast from this photo in Photoshop CS 5 or CS 6 Beta.
View 14 Replies
View Related
Aug 7, 2012
I have used gimp for years, and never tried to remove a blue cast from an image. I have several images I have shot over the years, of winter scenes, now I want to see them in "normal" colors. I tried a couple of plugins and gimp operations, but I have no real good results.
View 2 Replies
View Related
Feb 5, 2013
I only do photo quality prints to Epson matte a few times a year so I run test prints with various settings to get what I want. My granddaughters wanted some prints from a web site framed and my wife wanted prints of an emailed photo of their old mountain cabin. I had to do some color manipulation of the cabin, but the web site images had been expertly processed and all I had to do was print properly.
I experimented with the cabin image print settings. Epson changed the names of all their papers, so the Epson print profiles in the print dialog didn't match the name on the matte paper box. I deciphered that, but I wasn't happy with the result so I tried two of the other Epson profiles and hated it. There's quite a long list of profiles available, some specific, and some just conventional color spaces like sRGB, aRGB. For the heck of it I tried Pro Photo RGB as a printer to paper profile. The print of the cabinimage with an embedded aRGB profile was everything I could want. I did the web site sRGB images the samwe way and they were really nice.
The puzzle is this: What does using Pro Photo RGB as an instruction to the printer cocerning what it is printing to thru Photoshop even mean? The printer has never heard of the colors possible in Pro Photo, and the source image is in sRGB ( verified by Photoshop). I can conceive that an RAW image should be rendered as aRGB for inkjet and that the inkjet has some blues that are outside the aRGB, but I can't understand telling an inkjet to use Pro Photo to print sRGB.
View 23 Replies
View Related
Feb 11, 2010
I linked in a cad.dwg survey into my Revit model and I don't like the result. I'm trying to unload or remove the linked file now and I get an error message, "A serious error has occurred. It is strongly recommended that you use Save As to save your work in a new file before continuing."
Saving to a new file does not change this problem. I've tried cleaning up the survey file, moving the file to another location, changing from relative to absolute path. Revit shouldn't even be finding this file any more. Isn't linking similar to x-refing in AutoCAD?
How to get this dwg out of my Revit file?
View 3 Replies
View Related
Jul 1, 2009
I have several lovely images with a partial green horizontal colour cast caused by very out of focus bars, (without cloning!)as shown here, across tigers head!
View 5 Replies
View Related
Jan 25, 2012
I have underlayed a DWF drawing in AutoCAD and I'm looking for a way to manage the the lineweight while printing.
I have try many settings but the lines from the DWF come out very thin, probably the thiner that AutoCAD is able to provide.
View 6 Replies
View Related
Jul 14, 2012
I am having a problem where just a few of my files show heavy magenta banding after importing into Lightroom 4.1. I am importing RAW files from a Nikon D800. I don't think it's the camera because most of my files are fine. And I don't think it's the files themselves either because they look fine in camera, in finder (Mac OS X 10.6), in Photoshop CS5 and even in Lightroom 4.1 itself at the import preview. But once I actually import the photos, they suddenly become corrupt and show heavy magenta banding. I've removed the files from the catalog and the HDD several times and attempted to re-import several times without success. And of course there are several attempts at restarting the iMac and running hardware checkers etc. to eliminate extra variables. It's only 5 or 6 files out of maybe 30.Â
View 13 Replies
View Related
Apr 19, 2013
I shoot in Camera RAW on a Canon 5D2 in LR3 and I'm having colour issues; skin tones are often purple/magenta tinted and very difficult to correct. I usually set the WB to Custom and shoot a grey card and set the picture style on the camera to Neutral (why does the WB affect RAW images anyway, I thought it only operated on the jpgs?)
On import, pics often look ok then resolve into higher contrast, garish colour versions which are less pleasing - have I set a preference incorrectly or am I missing something else?
View 3 Replies
View Related
Oct 27, 2012
After upgrading PS CS6 to 13.0.1, HDR Pro now renders terrible colors. The reds seem to be missing and there is a pea-green cast to everything. The screen capture from LR shows two 32-bit images made from HDR Pro the one on the left was created 9/19/2012 on the right was created 10/27/2012 after having upgraded CS6 and LR4. The color space in Photoshop is Prophoto
View 26 Replies
View Related
Jul 24, 2012
I'm trying to add a color cast to a grey, contoured button shape (defined by a vector mask), by overlaying it with an adjustment layer with a solid green fill and setting the blend mode to "multiply."
Â
The shape layer has transparent pixels around the perimeter, so I would not expect a "multiply" operation to result in visible green there. But it does. That's no good. I need to export this image to a PNG with the transparency intact.
Â
I can see that the green adjustment layer has a "Color Fill 1 Mask" channel, but copying the shape layer and pasting it into that mask channel doesn't seem to work. The display shows a very thin outline of the vector shape, but I can't appear to do anything with it.
View 14 Replies
View Related
Nov 27, 2004
I have some photos I took at a car show. Unfortunately, the event was held in a garage under horrible lighting. It gave everything a yellow-orange cast. What is the best way to remove or shift the color cast to more natural light. I tried Channel Mixer to some good effect. I have attached a sample image. I realize it may be hard to recover anything, but I'm just interesting in the technique.
Note in the image, there is almost no blue. The Channel mixer allows "converting" some of the other light into blue. I'm I on the right track?
View 9 Replies
View Related
Jun 5, 2009
PS CS4. Everything seemed to go fine, but now all of a sudden his images are displayed with a strong yellow tint. I don't mean a slight color cast, I mean a STRONG yellow tint. The images appear the same in Photoshop, the Bridge, and even ACR. I re-calibrated the monitor (Gretag McBeth) and generated a new profile just be sure, but that wasn't it. The same images viewed in other applications (Picassa, opened in a browser, etc.) on the same computer display normally. This appears to be only Photoshop related. What's also interesting is that CS3 now exhibits the same problem after the CS4 install. I reviewed all the color settings and workflow, and nothing is out of the ordinary. The Nikon raw images were imported via ACR, and opened in Photoshop with ACR workflow options set for 16 bit/Adobe RGB. Photoshop working space is Adobe RGB. I also installed the 11.0.1 update. But here are what may be a couple of clues. First, it's not just the image files that look bad. The colors are awful in the color picker in the toolbox. The entire color picker slider is almost all yellow and orange. And here's another good one. We tried importing some new raw images via the photo downloader in Bridge. With the downloader in Advanced mode, the image previews before download show the same yellow cast. But after I click the Get Photos button, the image colors appear correct as they flash on for a couple of seconds while being downloaded. This has got to be a big clue for someone. What's different about how the image is displayed during that two second preview during the actual download? The PC hardware is a 3.2Ghz Pentium 4 Dell tower (2G ram) running XP Pro w/SP3, with a nVidia GeForce 7800 graphics card, and the screen resolution is 1024x768. I'm thinking maybe a graphics card issue or corrupted system profiles, but I'm a Mac and he's a PC so my PC troubleshooting skills are limited.
View 2 Replies
View Related
May 5, 2008
I have this image with an intense orange background.
I want to change the color of the background to a light green, or even white (depending on my boss' mood). But the background color leaves me with an undesirable orange color-cast on the old man.
this is only a very rough clipping, the final version will be well refined.
way to eliminate this color-cast, most noticable on his hair. How would you go about it?
View 4 Replies
View Related
Nov 29, 2004
remove the offending color cast on this photo.
I've tried different techniques but so far i'm not there yet.
ignore the black eyes. it was done to protect my friend privacy.
View 9 Replies
View Related
Jan 3, 2013
My printouts are getting a greyish color cast!?
View 5 Replies
View Related
Oct 24, 2013
I tryed first time this feature and disappointed allready.The result of three layers to assets given 3 darken colorcasted images.
This last one is exported with Save for web feature and got correct colors.Original document is on srgb color so it should be right in first place?
View 2 Replies
View Related
Apr 25, 2012
RAW and open edit all my RAW files in Bridge 4.0.5.11 (CS5). All goes well here until I send the images over to PS5, where upon opening there, they all seem to have a much warmer, yellowish cast.Have I possibly gotten something set wrong in Photoshop that causes this wierd off-color cast?
View 1 Replies
View Related
Nov 10, 2013
I am learning to neutralize color casts in PS6, and one way I found was through this website:Â [URL] ..... which proports to teach Photoshop.
Â
In using their examples, in step 1 new adj layer, pick photo filter, fine.
Step 2 it says to click on color, which opens up the color picker dialogue box, and move cursor, which turns into eyedropper over the color you want to change and click on it. It is supposed to sample the color and change the color in the color picker dialogue box.
Â
When I click on the color, what comes up in the color picker window is WHITE (for new color), split with the original color of the filter. I cannot get it to come up the color I am picking. I cannot get it to come up without the split color in the box. Even if I change it to only use Gamut color, I still get a split box with white as my picked color.
Â
When I use'command-click' on the color I want to sample, it changes the color in the image, instead of just sampling it for the (new) color in the color picker, so I it changes the original color in the image and I cannot use the information.
Â
When I don't use a New Adj layer and just do it on the image, itself, it works.
View 1 Replies
View Related
