I have several lovely images with a partial green horizontal colour cast caused by very out of focus bars, (without cloning!)as shown here, across tigers head!
View 5 Repliesremove a green colour cast across areas of a picture caused by (very) out of focus bars/ cage mesh?
View 4 Replies View Relatedhow is best to remove the Colour Cast from this photo in Photoshop CS 5 or CS 6 Beta.
View 14 Replies View RelatedUsing digital photography to capture the image of a large poster printed with dot structure. Portions of the image have bands caused by the pattern of dots. Resizing and rotating doesn't reduce or eliminate.
What is the best way to remove these bands in Photoshop? Note: clone tool not satisfactory (causes fuzziness, blurring). Tried selecting the affected area(s) and using Gaussian Blur but bands are too wide. Same for Dust and Scratches.
I get great results with CS4, and Epson R2880 and calibrated monitor and paper profiles: prints just like the monitor only a little darker but I can handle that. "Upgrading" to CS6 with everything else unchanged and the prints have a muddy green cast. Currantly the "solution" is to manipulate in CS6 and print from CS4.
View 5 Replies View RelatedI printed a black and white scanned (gray scale) image on Saturday, no problems.
On Sunday I noticed a small hairline from the negative, cloned it out and reprinted. The image had acquired a distinct purple cast. All attempts ticking a variety of appropriate (and possibly inappropriate) boxes in PS and the printer options failed to remove the cast. Rescanning and the cast is still there. Printing on another printer (HP) and the cast is there, so I presume it's source is Photoshop (CS).
I have some photos that have an orange cast that I would like to remove. May also need to lighten them a little, unless removing the orange does that. Are there any tutorials that would tell how to do this? Or if it is easy enough, give some guidance here?
View 3 Replies View RelatedIs ther a specific adjustment for a global colour caste in LR4 ?
View 3 Replies View RelatedBackground got partially locked; how do I remove the lock?
View 1 Replies View RelatedI had incurrect setting when taking some pictures, which turned the pictures blue. Is there a way to correct this in Elements 9?
View 5 Replies View RelatedWhat is the keyboard shortcut for remove color cast and for brightness/contrast?
View 1 Replies View RelatedI have used gimp for years, and never tried to remove a blue cast from an image. I have several images I have shot over the years, of winter scenes, now I want to see them in "normal" colors. I tried a couple of plugins and gimp operations, but I have no real good results.
View 2 Replies View RelatedHow to remove a partial black frame at end of video sequence? 1/8 of end frame is black. I inserted last clip on timeline and it ends with this last scene with 1/8th vertical black bar. I just need to know how to stretch out that last frame to get rid of the black so the whole image is there without messing up the audio file.
View 2 Replies View RelatedThe colors on the computer monitor do not match the colors of my printed photos. The pictures have a yellow color cast. I am printing using HP Photosmart 7520.
View 1 Replies View RelatedRight now I am working on a Win 7 64 computer and have a Canon MP810 printer. I read the materials on color management and set my color management in "Print" in Lightroom 4 to "managed by printer". My printer color management in advanced settings is set all to defaults. When I print a photo from Lightroom 4, there is a distinct magenta cast to the entire photo, but it's most observable in midtone neutrals. A burnt out section of a lightbulb goes white, for instance, but greys seem to go pinkish, greens to a rust, etc. I also printed the same photo from a windows file, using Windows 7 print mode. That photo seemed to go slightly magenta in the neutrals but not nearly to the same degree. what I might try or test to see if I can get my print colors more accurate?
View 3 Replies View Relatedhow to make a partial open (saddled) and partial box (housed) stringer?
The only difference is that the open treads do not extend but are the same length as the box treads.Partial_Open_into_Box_Stair.gif Using Autocad Architecture 2012.
I used to work on a project for a stamp album and i think we had needed
photos one day a man came in with images i think he'd taken, he had the
images removed from the background pretty much seemlessly i or someone else asked him how he did it and he told me he had used some sort of software which removes a specific colour from an image so, he would pick the colour from the photo and go ovet the photo with the eraser tool and it would remove it.
I don't think the software was fluid mask, fluid mask it seems works mostly on masking, the program if it now exists i may be wrong solely, dealt with picking a colour and erasing it.
what is this program that picks a colour or colours and erases only those specific colours.
I wish to see only the printer profiles that I create in the Photoshop CS6 print settings - Colour Management - Printer Profiles drop down list.
I wish to delete, or at least to move to a holding folder, all the unwanted colour profiles listed in that drop down list. I have seen reference to the location in Windows 7 of colur profiles as being in the following folder
WindowsSystem32SpoolDriversColor
However, I cannot find a Spool folder on my system, so can get nowhere. how to remove unused colour profiles used by Photoshop.
I was watching a video on youtube when a came upon a brush set called lens flares, since I already had the Custom Brushes Mini plug-in, I was amazed by the lens flares. So then I went to Brusheezy(Dot)com and searched lens flares, there was a brush pack that was the lens flares I was looking for, so I did the process so I could use them, but then when I went to use the magic wand tool, and delete the black colour for it to be transperent, not all the black was gone, I tried changing the tolerance to remove more black, but it wouldn't budge.
View 2 Replies View RelatedI need to remove the '.com.au' from this jpeg version of a logo I have to use it for a magazine print file I am working on in indesign. I have opened the file in Illustrator (it is a very large file because it was designed for outdoor sinage.) and I thought I had better ask about the best way to do it without it affecting image or print quality.
View 12 Replies View RelatedI have been working on a layered PSD file putting together a website visual for a few weeks. Yesterday I went to save a copy of the document and in that process the file went a bit weird and some text changed colour and 5 layers had a portion of them deleted (all photos in the header area, like in the attached image). It's happened twice since yesterday, but can't seem to recreate it.
View 1 Replies View RelatedLast night, I downloaded an update for Photoshop CS6, Windows 8, 64 bit. The update failed, and I can't get PS to run at all.How can I restore my program?
View 7 Replies View RelatedI bought Photoshop CS2 some time ago. I got a new mac (OS X 10.8.2) and when I'm trying to install it I introduce the cd, accept and after it copies the files, appears "The installation failed" The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
View 4 Replies View Relatedmy Photoshop elements 5.0 program is corrupted and caused my computer to shut down. now when I go to my photoshop elements program 5.0, it freezes up and does not allow me to use it. I would like to un-install this program and re-install it but want to be sure I don't lose my picture files. Will I lose my pic files if I do this?
View 2 Replies View RelatedI try to run Photoshop.exe, but it doesn't respond. I get this error message. How to fix it? I have no idea where is a problem? I had no problems with it earlier.
ERROR MESSAGE:
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: Photoshop.exe
Application Version: 8.0.0.0
Application Timestamp: 3fce5708
Hang Signature: 1875
Hang Type: 0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1063
Additional Hang Signature 1: 3732c99c21cdca196fbfee3cc7094b85
Additional Hang Signature 2: 848c
Additional Hang Signature 3: 5c7261f725b6a443e8327138a3fe0208
Additional Hang Signature 4: 1875
Additional Hang Signature 5: 3732c99c21cdca196fbfee3cc7094b85
Additional Hang Signature 6: 848c
Additional Hang Signature 7: 5c7261f725b6a443e8327138a3fe0208
I have many slides, scanned over the past 10 years, with duplicate file names and filed by date. I converted my Elements 9 from PC to iMac and many incorrect connections occured. Is there a way I can correct these connection errors? This problem involves about 5% of my 25,000 photo files.
View 2 Replies View RelatedIs there a way to correct the slight inverted pyramid effect caused by a 17-40 when taking interior room shots in Lightroom or do I have to go to PhotoShop to do this? I have found the lens profile correction but are there other tools in LR to use? What I am seeing is a slight outward shift from floor to ceiling on side walls and need to straighten these walls.
View 3 Replies View RelatedI was wondering if there is some equivalent in Smoke to Final Cut's flicker filter, which I use frequently to eliminate flicker and 'buzzing' caused by fine lines, especially evident when HD is down converted to PAL for broadcast?
View 1 Replies View RelatedCannot read data on socket: Software caused connection to abort
I imported an AAF linking to R3D and Sony footage. When I tried scrubbing the timeline, I got that message. Smoke is REALLY slow now. And when I try to look at footage in my gateway, I get READ ERROR.
Also, the proxies don't start rendering in the backburner...
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I create i new image with standard properties like 400x400 and 72dpi with a background color. Then i create a new layer and want to make a selection on the new layer using the Elliptical Marquee Tool.
When i do this i get the error beneath:
Warning: No pixels are more than 50% selected. The selection edges will not be visable.
I doesn't matter which size the selection has, i always get this message.
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View Related