Photoshop :: Remove A Colour
Apr 27, 2007
I used to work on a project for a stamp album and i think we had needed
photos one day a man came in with images i think he'd taken, he had the
images removed from the background pretty much seemlessly i or someone else asked him how he did it and he told me he had used some sort of software which removes a specific colour from an image so, he would pick the colour from the photo and go ovet the photo with the eraser tool and it would remove it.
I don't think the software was fluid mask, fluid mask it seems works mostly on masking, the program if it now exists i may be wrong solely, dealt with picking a colour and erasing it.
what is this program that picks a colour or colours and erases only those specific colours.
View 2 Replies
ADVERTISEMENT
Apr 7, 2012
how is best to remove the Colour Cast from this photo in Photoshop CS 5 or CS 6 Beta.
View 14 Replies
View Related
May 14, 2013
I wish to see only the printer profiles that I create in the Photoshop CS6 print settings - Colour Management - Printer Profiles drop down list.
I wish to delete, or at least to move to a holding folder, all the unwanted colour profiles listed in that drop down list. I have seen reference to the location in Windows 7 of colur profiles as being in the following folder
WindowsSystem32SpoolDriversColor
However, I cannot find a Spool folder on my system, so can get nowhere. how to remove unused colour profiles used by Photoshop.
View 4 Replies
View Related
Jul 1, 2009
I have several lovely images with a partial green horizontal colour cast caused by very out of focus bars, (without cloning!)as shown here, across tigers head!
View 5 Replies
View Related
Jul 8, 2011
I was watching a video on youtube when a came upon a brush set called lens flares, since I already had the Custom Brushes Mini plug-in, I was amazed by the lens flares. So then I went to Brusheezy(Dot)com and searched lens flares, there was a brush pack that was the lens flares I was looking for, so I did the process so I could use them, but then when I went to use the magic wand tool, and delete the black colour for it to be transperent, not all the black was gone, I tried changing the tolerance to remove more black, but it wouldn't budge.
View 2 Replies
View Related
Dec 5, 2013
I need to remove the '.com.au' from this jpeg version of a logo I have to use it for a magazine print file I am working on in indesign. I have opened the file in Illustrator (it is a very large file because it was designed for outdoor sinage.) and I thought I had better ask about the best way to do it without it affecting image or print quality.
View 12 Replies
View Related
Jun 18, 2013
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies
View Related
May 21, 2013
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
View 2 Replies
View Related
Aug 19, 2013
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
View 2 Replies
View Related
Aug 10, 2013
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies
View Related
Feb 25, 2004
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
Jul 16, 2013
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
View 9 Replies
View Related
Jun 11, 2012
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Jan 28, 2012
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies
View Related
Jun 24, 2011
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
View 1 Replies
View Related
Jul 28, 2012
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
Jul 26, 2013
Windows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
View 2 Replies
View Related
Jun 4, 2013
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies
View Related
Jul 8, 2008
trying to add colour to scanned drawings. I'm using the colour picker but 99.9% of the colours I pick say " out of gamut for printing" as I wish to print my drawings I am left with only a couple of dark and ugly choices.
View 8 Replies
View Related
Feb 14, 2006
i have a b/w photo of a church and i am wanting to add a sky from a different photo..
View 2 Replies
View Related
May 16, 2006
This has prob been covered with a tut before but im new here and yeah, thought id get my posts underway with this.
how to change eye colour on a black and white image, a colour image and then make the image black and white etc.
View 5 Replies
View Related
Feb 26, 2004
Does any one of you experts know how to turn the background of an image into black and white, but cut out a figure in the picture to keep in its colour?
View 1 Replies
View Related
Apr 21, 2004
Is it possible to do a gradient over an image so that image slowly changes from a black and white image toa colour-i thought maybe creating two layers then apply filter on top of one of em or somat-i jsut cant see how
View 3 Replies
View Related
Jul 31, 2005
when i go to change the colour in the pallette it will not change. well it does change but it only goes to a different shade of black - grey or white. its like its in black and white mode.
View 3 Replies
View Related
Aug 23, 2013
How can I get the Lab colour information not only of a single pixel, but of a wider range like a circle of 1 mm in diameter, for example?
View 2 Replies
View Related
Dec 22, 2012
I have weird issue with ACR and CS6. I process under ProPhoto RGB, 16 bit. When I'm happy with my processing, I then open up in CS6. This is when it get weird, the image that opens up is quite a bit flatter and less contrasty to the version I had in ACR. I've got CS6 as a view a ProPhoto RGB profile. The monitor is an ASUS wide gamut monitor and calibrated with an I1D2 puck using HP's custom software from it's Z-series printer.
I don't experience this problem when I'm using CS6/ACR on my office computer, the only difference is my office machine doesn't have a wide gamut screen.I've reset my Photoshop preferences and recalibrated my screen. I'm running W7 Home 64 on a Dell Studio 15, i7 laptop.
View 3 Replies
View Related
