Photoshop :: Colour

Feb 26, 2004

Does any one of you experts know how to turn the background of an image into black and white, but cut out a figure in the picture to keep in its colour?

View 1 Replies


ADVERTISEMENT

Photoshop Elements :: Why Won't Colour Swatches Created Stay In Colour Swatch Palette

Jun 18, 2013

Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project.  I understand from others that once they create a colour it stays there.  Why can't I get that to happen?

View 1 Replies View Related

Photoshop :: Replace Colour Tool Not Allowing Multiple Colour Replacement

May 21, 2013

I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
 
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
 
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed.  I know I also have the 'fuzziness' slider, but it does not give enough control.

View 2 Replies View Related

Photoshop :: 3 Colour T-Shirt Design From Full Colour Image?

Aug 19, 2013

I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
 
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
 
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
 
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).

View 2 Replies View Related

Photoshop :: Colour Code For Background Colour On Particular Web Address?

Aug 10, 2013

I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.

View 1 Replies View Related

Photoshop :: Converting Full Colour Image To 2-colour?

Feb 25, 2004

I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.

View 3 Replies View Related

Paint Shop Pro :: Colour Negatives - Removing Orange Base Colour Of Film?

Dec 19, 2011

I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?

View 9 Replies View Related

Illustrator :: How To See Object Selected Change Colour Dynamically As Adjust Colour Sliders

Aug 11, 2013

How do I see the object selected change colour dynamically as I adjust the colour sliders?
 
It seems the object only changes colour when I release the slider.  But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
 
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with.  Good for you.
 
I'm just wanting to do it LIVE.  Dynamically.  In 2013.  In Illustrator.

View 4 Replies View Related

AutoCAD Inventor :: Replacing Colour Of Faces With Another Colour In One Hit (Parasolid File)

Aug 17, 2012

I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.

Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.

So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)

I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?

View 3 Replies View Related

Paint.NET :: Colour Tint Tool - Specific Colour Scheme For Image?

Jul 16, 2013

I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
 
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?

View 9 Replies View Related

Illustrator :: (gradient Tool) Double-clicked Colour Stop But Colour Swatch Doesn't Come Out

Jun 11, 2012

[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.

View 1 Replies View Related

Photoshop :: Adobe Colour Management Print Defaults Assigning RGB To B&W Pages And Incurring Colour Print Charges

May 23, 2013

Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.

View 1 Replies View Related

GIMP :: Transform Similar Colour In Specific Colour?

Jan 28, 2012

Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?

View 7 Replies View Related

GIMP :: Apply Colour Filter To Transform One Colour To Another

Jun 24, 2011

I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.

I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.

View 1 Replies View Related

Illustrator :: Copy Fill Colour To Stroke Colour?

Jul 28, 2012

copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.

View 25 Replies View Related

Lightroom :: How To Convert Colour Negative To Colour Positive

Sep 12, 2013

I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5.  I have tried and failed!

View 6 Replies View Related

GIMP :: Colour To Alpha Colour Picker

Jul 26, 2013

Windows 7 and Gimp 2.8.2 in single window mode.

I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.

The image has an alpha channel.

I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.

How do I pick a colour from the image?

View 2 Replies View Related

Illustrator :: Select A Colour From Colour Wheel

Jun 4, 2013

I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?

View 4 Replies View Related

Photoshop :: Using Colour

Jul 8, 2008

trying to add colour to scanned drawings. I'm using the colour picker but 99.9% of the colours I pick say " out of gamut for printing" as I wish to print my drawings I am left with only a couple of dark and ugly choices.

View 8 Replies View Related

Photoshop :: Colour Sky

Feb 14, 2006

i have a b/w photo of a church and i am wanting to add a sky from a different photo..

View 2 Replies View Related

Photoshop :: Eye Colour

May 16, 2006

This has prob been covered with a tut before but im new here and yeah, thought id get my posts underway with this.

how to change eye colour on a black and white image, a colour image and then make the image black and white etc.

View 5 Replies View Related

Photoshop :: B&w To Colour

Apr 21, 2004

Is it possible to do a gradient over an image so that image slowly changes from a black and white image toa colour-i thought maybe creating two layers then apply filter on top of one of em or somat-i jsut cant see how

View 3 Replies View Related

Photoshop :: COLOUR

Jul 31, 2005

when i go to change the colour in the pallette it will not change. well it does change but it only goes to a different shade of black - grey or white. its like its in black and white mode.

View 3 Replies View Related

Photoshop :: How To Get Lab Colour Information

Aug 23, 2013

How can I get the Lab colour information not only of a single pixel, but of a wider range like a circle of 1 mm in diameter, for example?

View 2 Replies View Related

Photoshop :: Colour Mismatch Between ACR And CS6?

Dec 22, 2012

I have weird issue with ACR and CS6.  I process under ProPhoto RGB, 16 bit.  When I'm happy with my processing, I then open up in CS6.  This is when it get weird, the image that opens up is quite a bit flatter and less contrasty to the version I had in ACR.  I've got CS6 as a view a ProPhoto RGB profile.  The monitor is an ASUS wide gamut monitor and calibrated with an I1D2 puck using HP's custom software from it's Z-series printer. 
 
I don't experience this problem when I'm using CS6/ACR on my office computer, the only difference is my office machine doesn't have a wide gamut screen.I've reset my Photoshop preferences and recalibrated my screen.  I'm running W7 Home 64 on a Dell Studio 15, i7 laptop.

View 3 Replies View Related

Photoshop :: Colour Settings In CS4

Oct 27, 2012

I changed my Color Settings in the Edit menu to 'Best Workflow CS4' which apparently synchronized my color settings, but the printed colors are now muddy and have lost their vibrancy.

It is a US orientated setting for US inks.  I am in the UK and use Ilford Smooth Pearl Paper with the appropriate color profiles loaded.  What are the recommended color settings for printing in the UK?? Is it Europress 2 which is what I'm now trying out?

View 7 Replies View Related

Photoshop :: CS4 - Background Colour

Dec 8, 2012

with CS4 I had a clear desktop with my screensaver, only the tools bar were visible at the top and on the side now that I have CS6....... the whole screen is covered with a dark grey colour ..... that means that I can not select other photos or folders unless I hide photoshop. I had a look at the preferences, interface, etc. and I can not see any difference between the two.what changes to make to the settings so that I can use CS6 and see the normal desktop.

View 2 Replies View Related

Photoshop :: Colour After Using Spyder

May 16, 2013

I've calibrated my monitor using the spyder 4 Pro for the first time. I am just wandering what settings I should have in the 'Windows Color System Defaults' window now that I have calibrated with the spyder?? DO I -

A. Leave as sRGB 'default setting' ?
B. Use Prophoto as that is what I use in Photoshop?
C. Use the profile created by the Spyder

My primary use for the computer is Photoshop although I do use it for everything else (browsing web, films) My first thoughts is that you leave the setting as sRGB because you need that for everything else other than Photoshop like web etc. In that case does that mean that Photoshop ignores the Windows default? The most important thing is that I am editing colours correctly in Photoshop; that what I'm seeing is 'true'

I'm desperate to get colour sorted so I can get on with actually using Photoshop

View 6 Replies View Related

Photoshop :: Colour Setting Between AI And PS

Oct 9, 2012

I have a graphic that is
 
C 100
M 100
Y 100
K 100
 
When I move this over to Photoshop it converts it to a smart object and gives the colour a profile of
 
C 75
M 68
Y 67
K 90
 
I cannot see when I have gone wrong in my colour setup.

View 2 Replies View Related

Photoshop :: CS6 - Put Colour Profiles?

Sep 12, 2012

I have just installed CS6 standard. I would like to put my colour profiles in Photoshop CS6 under Mountain Lion from CS5. Those files are most used for printing from a wide inkjet printer. Where do I put the colour profiles? I am not sure if the colour profiles need updated or not.

View 1 Replies View Related

Photoshop :: CS5 Colour Change

Jul 17, 2013

When i work on a image in photoshop cs5 then save it to a folder ready for printing there is a dramatic colour change.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved