I have a graphic that is
C 100
M 100
Y 100
K 100
When I move this over to Photoshop it converts it to a smart object and gives the colour a profile of
C 75
M 68
Y 67
K 90
I cannot see when I have gone wrong in my colour setup.
If you have different shades of red on a single layer but you want them all be the same shade and have the same CMYK setting. Does Photoshop CS4 have a tool to make the adjustment accurately by keying in the CMYK without filling with the paint tool?
View 9 Replies View RelatedSince about a week ago I've been having a bit of an annoying problem with CS - whenever I use the eyedropper to pick a colour, the one I click gets put into the secondary part, so I have to press X in order to use the colour I just selected. It seems like this is some sort of option that I must have turned on accidentally, but I can't find anything about it.
View 4 Replies View RelatedWhenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedBest practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View RelatedI have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies View RelatedWindows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies View Relatedi would like to know if the ram setting slider in photoshop preferences/setting is meant to be for all the available ram in the computer or all available ram, which stays free from all other sametime running apps? for example, if i run osx 10.8 or 10.9, i use to run ONLY photoshop and no other app besides, so the finder would need maybe 2 or 3 GB RAM, and the rest is for photoshop.does the ram setting count with finder ram consumption or without?
my imac has 32GB RAM - so, if i set ram to 70% (out of 32GB) in photoshop settings, the finder can use 30% of 32GB, yes? anyway, it won't show "available ram is 32GB" in the settings, it shows less than 32GB would be available, so is this the answer to my question?
could i set it to 80% or 90%, when i only run photoshop (cs5 / cs6 / cc) and no other app besides? (only the 10.8.5 or 10.9 finder) or would this mean performance lags in photoshop?
Is there a way to make the setting of all the windows smaller and therefore have a bigger space area? I need Layers, Actions, Color, Navigator and Tools open at all times, but they take almost 30% of my work area.
View 5 Replies View RelatedI'm testing out Photoshop CS6 to see if there's much a difference between CS5, and i'm noticing that there's no Recovery mode in Camera RAW for my file, they seemed to have changed Camera RAW a lot.
Is there no Recovery setting anymore? I have been using this since CameraRAW essentials, which Adobe ended up purchasing so i had to use Camera RAW.
We done photo shoot for our client, we received all pic from .CR2 file,We have .cr2 convert. i am not a familiar in .cr2 or RAW IMAGE . what is the fundamental setting done for RAW image or .CR2 image.
View 7 Replies View RelatedHow do I set up CS6 preferences?
View 3 Replies View RelatedMy workspace doesn't have the main screen (background) I don't know why.all panels work except for the above. My workspace is set up for "Essentials".
View 1 Replies View RelatedColor Settings
Settings Web Graphics Defaults witch i have pick.
Advanced Mode do i need to tick that box (yes all no)
Working Space
RGB: sRGB IEC61966-2.1
ColorMatch RGB
Apple RGB
Adobe RGBB (1998) and i'm perty sure i pick this one
CMYK: Us. Web Coast (SWOP) v2
U.S. Web Uncoasted v2
U.S Sheetfed Uncoated v2
U.S Sheetfed Coasted v2
Japan Standard v2
Euroscale Uncoasted v2
Euroscale Coasted v2
Load CMYK
Save CMYK
Gray: Graym Gamma 2.2
Gray Gamma 1.8
Dot Gain 30%
Dot Gain 25
Dot Gain 20
Dot Gain 15
Dot Gain 10
Color Management Policies
RGB Off
Preserve Embedded Profiles
Convert to Working RGB
CMYK: Off
Preserve Embedded Profiles
Convert to Working CMYK
Gray: Off
Preserve Embedded Profiles
Convert to Working Gray
I do Colorscheme's on aircraft for realflight g3 simulator. I am trying to figure out how to save a design on say a wing and be able to go back after saving and closing the file and be able to move it around and adjust it to look correct,without having to completeley redo the whole thing, I am thinking i can save the layers,
View 2 Replies View Relatedsurfing around the Web I've read several advices on how to set Level's Black & White values. I mean Levels, double click on Black and White eyedroppers ->RGB-> Black values 10? 5? White 250? 255? Which are yours?
View 3 Replies View Relatedhow to set up a digital picture in Photoshop so it looks good printed. I am unsure how to do somethings in the instructions. These are the instructions.
Digital files: 300 dpi
Shadow Dot: 87
Highlight Dot: 9
85 Line Screen
Round Dot
Save picture as RGB file, adjust excess colors before convert to Grayscale.
I Know how to make round dots, and I kind of know how to adjust color, I also know how to convert to Grayscale. But everything else confuses me.
How do I set the Shadow dot and Highlight dot?
And where can I change the dpi?
And how do I set the Line Screen?