Premiere Pro :: How To Remove A Partial Black Frame At End Of Video Sequence
Mar 1, 2014
How to remove a partial black frame at end of video sequence? 1/8 of end frame is black. I inserted last clip on timeline and it ends with this last scene with 1/8th vertical black bar. I just need to know how to stretch out that last frame to get rid of the black so the whole image is there without messing up the audio file.
After selecting 2 (or more) files and right clicking and choosing Multi camera sequence from source, I drag the newly created sequence on to the time line but all I get is the two files on the time line stacked over one another. the sequence never gets created.
I get a black capture screen when capturing with CS6 on a Windows 7 machine. I'm capturing through Fire wire from DV tape, via the VCR function of a Canon XL2 camera. I have tried restarting, etc.; also toggled the "preview video" radio from the Settings button in the capture Window. Nothing works and I need to be able to preview my video as I'm capturing. It is not good enough that the video actually captures fine. Also, I am forced to turn off Device Control in order to capture because it kicks me out of every capture (an immediate message of : "no frames captured") unless I do.
Just made sure updates for the video card and all the hardware were current and still getting this problem where when I go to adjust a channel of video a random frame from the below channel will insert itself into the clip that I just moved as if it was married into the source footage.
Adobe Premiere Pro Running an nVidia 660 with 331 drivers installed Win7 64 bit ultimate
It used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.
I have several lovely images with a partial green horizontal colour cast caused by very out of focus bars, (without cloning!)as shown here, across tigers head!
I have this problem with my MText Background Mask. You can take a look at the two attachments. Each one gives me the same issue, but with different MText objects. I'm also plotting to a KIP5000 and a SHARP All in One, and I get similar results, except in some of the MText, they come out in a random color as well. The pc3's for all devices are set to Lines Merge.
The text is actually part of an xref file, and if I plot directly from the file they are in, I have no problem. I did a test where I copied the text into the sheet file, and got similar results when the text is in modelspace, and I got my intended results when the text is in paperspace. Now, this is the way I want to go...but the company standard is to draw it all in the xref, so I have to figure out how to get around this.
I've gone back and forth with the Merge/Overwrite options in the pc3, and when plotting to PDF and SHARP, I get the correct output with Overwrite, but the KIP just completely ignores the background mask with Overwrite.
Win 7. CC7.1...For specific reasons I created a new Project in Premiere CC7.1 and imported a single sequence from a CC project that had a lot of sequences (11)
This worked absolutely perfectly but I was surprised by 2 things ....that I do not recall happening in CS6 or any prior versions. ( I never did this procedure much though)
#1. The assets came in as if project managed. ie. Only the assets the sequence required. In this case a very small sub set of what was in the original project.That was very cool and made for a neat and compact project. I dont recall that in CS6 so if its a feature...I love it.
#2.The assets did not ingest in the new project in the Bin folders carefully named and organised in the original project.Not so cool in the case where one is using source footage with common file names (eg. AVCHD) and not so cool that it needs managing and sorting again.I think I recall assets imported in original folders in CS6 ...albeit...non project managed ie everything??? Part cool and part not!
Do wonder if #2 can be looked at as a possibility for a fix. It would be brilliant please Adobe.I created a new project and imported the sequence ( which was an edit lockdown) specifically for a Direct Link into Speed Grade.
It was an insurance measure in case of any issues that may have arisen. eg a corruption via the DL. workflow.the DL and SG are working on this brilliantly well.
I'm trying to export a sequence as XML, but no matter what I try, it exports the wrong sequence. I've tried selecting the sequence in the project panel, then hitting export, and I've also tried opening the timeline and exporting from there.
The sequence being exported is actually used at one point in the sequence I want to export, otherwise I would just delete it temporarily. I'm using Premiere CC 7.2.
Using CS6 Premiere Pro in Windows with the intent of making a DVD of the movie,how do I choose the Preset descriptions in the "New Sequence" screen? I assume I'm going to choose an AVCHD version, but don't have any idea what the differences are.
Ok, so I'm in the project panel, right? Minding my own buiz and doing what I do. I want to rename a sequence that I've instinctively named "fat chick" because, well, uh, she was a bit heavy (and in a bikini). Well, now I need to show the "fat chick" that's paying me what her sequence looks like. So I want to change "fat chick" to "cute lady" so she's happy. But guess what? I can right-click and hit rename, but I never get further than that. I can't rename it. So I had to show her the sequence and hope she'd only see the video, not the name of the sequence.
What's weird is I can rename a whole bunch of other sequences, but the other half of the time I can't. Oh, I can rename it if it's sitting in the timeline of another sequence... but it only changes it there in the timeline. (I've posted on this before I realize this is a limitation in Premiere). But this is different. I want to rename sequences from the project panel but can't.
Now she's all mad at me and threatening a lawsuit becaue I hurt her feelings, yada, yada. It's a disaster... all this because I couldn't change the sequence name.
Ok, so the story's made up, but the renaming problem is true. Is this a bug? How can I rename sequences when they don't want to be renamed and are perfectly satisfied with the first name I gave them?
I lost a sequence in Adobe Premiere Pro CC. I was going to export a new sequence I created in a project. While I was doing it, the PC crashed.When I restarted premiere, my updated project file was gone and only an older version opened, where all my work was missing.
Syncing in plural eyes is good with our pro res files, but when I try and sync with some mp3 files from a zoom h1 recorder it goes black at the bottom of the timeline and responds really buggy.
I have multiple sequences that use clips from an interview that show diagonal lines through them in the timeline. Not all files from the interview have these diagonal lines. These problematic clips do not contain audio or video when the playhead is on them. They don't even have a thumbnail pic in the sequence while other shots from the interview do. How I can get these to work in the timeline again?
I was working on a project last night and without warning, every time I tried to transfer a movie clip to a sequence, the audio stopped coming with the video. The sound definitely works and plays in the upper left hand window, but when transferring the clip to the sequence, the audio did not come with it. Before starting work on the project, I updated Premiere through the Creative Cloud.
This problem has happened before at the beginning of a project, and I have been able to start a new sequence without problems. This morning, however, when I tried a new sequence, the sound would not come in at all. A picture of what my screen looks like when I try to put in a video clip to a sequence is below.
The settings for the audio are the same between the video and the sequence. I definitely don't want to lose the ability to add sound when I get further into my project. What can I do to fix this?
I'm running Adobe Premiere Pro CC on a 2011 Macbook Pro, and I was working on a project. When I went to render the whole sequence, Premiere froze and auto quit. When I went to open the project again, I got the error:
"This Project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
Every version of the project's auto-save files gave the same error. I tried all of the suggested tips like deactivation and clean uninstall, but nothing's changed.
Let's say I have 4 sequences, of which 2 are multi-cam. I go through each sequence and add my Markers. How can I locate these sequence markers without opening each sequence and looking at the Markers panel?
Add Edit don´t cut all the layers highlighted. When I insert or overwrite a clip into the timeline, the timeline don´t respect the highlighted layers (ex. if layer 1, 2 and 3 were highlighted and the clip were put in layer 1, clips on second and third layer should be deleted between in and out markers, but they aren´t.
The Ctrl+D and Ctrl+Shift+D commands (add transition) doesn´t work like the other versions too (respecting where the cursor is)the buttons to go to the next cut on timeline (in my keyboard, A and S) doesn´t work right too.I would like to know if these are bugs or the new Premiere CC is different from the others before.
On tryng to open Premiere CC projects it would appear I am missing a substantial set of sequence presets and cannot open any projects. if I open a new project there are only a limited set available.
I get the following error message "This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type".
I am trying to create a clip that will be played on a loop so I want to make sure that the in and out point are identical (the clip is of an object which is rotating). Is there a way to overlay the in and out point to line up the placement of the in and out points?
how to make a partial open (saddled) and partial box (housed) stringer?
The only difference is that the open treads do not extend but are the same length as the box treads.Partial_Open_into_Box_Stair.gif Using Autocad Architecture 2012.
I built an animated sequence in Photoshop 5, but when I try to add a new frame to the end of it in PS6, that last frame appears in plastered over all the frames before it. Is there something that I have to click on or off to keep that image on the one frame, instead of propigating it ot every frame?
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
I am using Premiere CC to edit Pro Res 422 in a sequence using the ARRI Cinema 23.976 sequence preset. My rough cut sequence has lost all audio playback. I can play audio from the source, and in other sequences in the same project but this sequence specifically is not giving my ANY playback. In audio hardware, I have set output to built-in output and made sure that my system is set to the same thing as well. When I click into channel properties, right click>Modify Channel I see 4 audio tracks set to Source Channel 1, 2, 3, 4. All are set as "Ch.1" under Channel in track.