I create i new image with standard properties like 400x400 and 72dpi with a background color. Then i create a new layer and want to make a selection on the new layer using the Elliptical Marquee Tool.
When i do this i get the error beneath:
Warning: No pixels are more than 50% selected. The selection edges will not be visable.
I doesn't matter which size the selection has, i always get this message.
how to make a partial open (saddled) and partial box (housed) stringer?
The only difference is that the open treads do not extend but are the same length as the box treads.Partial_Open_into_Box_Stair.gif Using Autocad Architecture 2012.
This morning, I opened CS6 and noticed that Open Recent was grayed out. So I opened my most recent from Bridge and found almost all my settings had reverted to default, except for Menu and Keyboard Shortcuts. Workspace still had the correct name.
I have CS6 Prefs saved on the desktop but I chose to rest most by hand to see if anything might foul up. It didn't so I renamed the final settings to a different workspace. In so doing, I lost my keyboard shortcuts so I had to reset those as well. Of course, I realize that I didn't have to do all that, I could have simply substituted the saved .psp, but since this revert was not as a result of my resetting prefs manually, I wanted to see what if anything might be wrong and perhaps interfere with manual settings.
The strangest behavior showed up when I went to reboot the computer then open PS. It took a very long time for PS to open, and during that time a blue square would flash on screen behind the PS Loading Icon, which is something I have not seen before.
Win 7 Ultimate
CS6 Extended, Cloud derived
12G RAM
148G C drive
39G Scratch
20G Second Scratch
4 core AMD processor
ATi 7750 Video
Examination of Events showed no problems other than an inability to run backup today because the Backup HD was unavailable. It may have been trying to do so while I opened PS as I note several attempts to do so in Events log.
How do I partially brighten a picture. I use the magic tool to select the area that I want to brighten, however, it left a white outline.
View 4 Replies View Relatedoffering dark t-shirts that allow transparent PNG's to be used. Unfortunately, the printing process for dark shirts leaves white wherever partial transparency is present, which usually leaves a white halo around images and text.
Is there any way to force PS to not use partial transparency? Partial transparency looks great on white shirts, because the different printing process sees it as another form of white. It would be great to be able to toggle between usage and nonusage of partial transparency.
You can save for web in PNG-8 mode which dithers the partial transparency areas, but it also drops the color count down to a level that makes the design look bad. So far, that's the only way I can see to remove the partial transparency from already finished designs.
I am using photoshop for yesterday and it's black magic for me, so I ask you for a little favour. Namely, I owe a picture that needs new background, but just partial. Here's the link
As you can see there I am located between doors, that's good and I want them to leave untouched, but the point is to remove wall and stairs behind my back and switch it with sky, clouds texture (image). For example this one. I mean not to insert the whole background, just adequate part of it.
I capture a lot of brochures from holiday trips etc including outline maps of local areas. I then add rthese to albums, shows etc.
When I scan these, they frequently include a significant blue (sometimes grey) tint most noticeable at the edges or on folds in the items being scanned, presumably representing areas where the contact between the document and the glass is not quite as good as elsewhere.
I've tried weighing down the scanner lid, but I've not noticed any noticeable improvement.I'm now playing with the settings to see if I shoude be tweaking anything to improve this.
In the meantime, I'm left with a number of docs to clean. I've been doing this with the clone tool, but it is very time consuming.
I've been trying to find a solution to my filter problem and came across your forum. I am using PS CS2. I just started having the problem where only filters starting with A - N are showing up, I can scroll any further.
View 4 Replies View RelatedBackground got partially locked; how do I remove the lock?
View 1 Replies View Relatedremove a green colour cast across areas of a picture caused by (very) out of focus bars/ cage mesh?
View 4 Replies View RelatedJPEG's are opening in CS6 (32 and 64) with a partial gray/white mask in place. Resizing usually makes them disappear but they shouldn't be there to begin with. OS is Win7. The files display fine in Bridge and other applications.
View 10 Replies View RelatedI have several lovely images with a partial green horizontal colour cast caused by very out of focus bars, (without cloning!)as shown here, across tigers head!
View 5 Replies View Relatedcorel is only exporting the original palette size of 8.5 x 11. my files are 28' x 40" usually. only the part of the design that is covering the palette outline gets exported.
i can change the original palette size, still exports only 8.5 x 11 part of the design, doesn't shrink the design, just exports only that portion of it.
After putting a myPartial.cui file in c:program filesmyfolder, I want to load it automatically at every next AutoCAD startup.
What are the ways to tell AutoCAD to do this task?
I try to load my menu at application start. But I can't see this menu in the menu bar after start. I see menu only after I "reload" current workspace in user interface customization dialog.
const String myCuiFile = @"D:Visual Studio 2005ProjectsAutoCAD 2008Cuisits.cui";
public void Initialize()
{
String currentWorkSpace = (String)Application.GetSystemVariable("WSCURRENT");
CustomizationSection acadCustomSection = new CustomizationSection((String)Application.GetSystemVariable("MENUNAME") + ".cui");
if (acadCustomSection.PartialCuiFiles.Contains(myCuiFile) == false)
[code]....
I'm trying to run my cleanup script on a set of drawings just received from a consultant. Unfortunately every time a DWG is opened the purge fails with:
PURGE cannot be used on partially opened drawings.
Now to get the file opened NON-partially, I have to first open as partial and click the "Load All" button and "Yes" to bloodywell open it normally. Then the purge actually "works".
This needs to be done manually. Yet even after I've done this and then saved the DWG again, another normal open again gives the same error about Purge not allowed.
how to get the DWG to open non-partially when I'm running my SCR? I don't want to clean the 80+ drawings manually.
I made a drop down menu for offset commands back on a 2010 version. I wish to bring it over but I'm having a bit of trouble. I have read through and watched a few videos and they all tell me the same thing. Go into the CUI, click on Load Partial Customized File. I do this, select my cui file and I get an error that says:
Partial customization file cannot have the same Customization Group Name as the main customization file.
The name of my file is OFFSET MENU. I'm running 2012 version and I have finally gotten almost everything setup except for this.
How to make hip roof turn gable part way up the roof instead of at the bottom (which would be a gable roof).
View 7 Replies View RelatedI have a lot of tools with separate installers. But the ribbon- panels merge in one ribbon-tab.
View 4 Replies View RelatedI'm having difficulty accessing the Customization Section for a particular Partial CUI which I need to return the Ribbon Tab Source using AutoCAD 2012.
Here's the snippet
var cuiMain = (string)Application.GetSystemVariable("MENUNAME");
var csMain = new CustomizationSection(cuiMain);
//*** This line return null even when the PartialCUI exists? ****
CustomizationSection csPar = csMain.getPartialCUI("myPartialCui");
[code].......
Messing with creating a Partial CUIX ribbon, new to this with using macros, I have a general understanding. Created a pulldown for creating existing electric polylines, I have macro setting both to the same layer, but not sure how to get so linetypes are different for both. One would be underground and the other would be overhead.
View 1 Replies View RelatedRecently, I upgraded to xara photo and designer 7, i cut off a part of a photo and pasted it on a white document, is there a way to blur a partial part of a photo, in other words by selecting multiple points under the shape tool and blur them ?
View 5 Replies View RelatedI've been using Xara Photo and Graphic designer for about a week now to design some characters for a game I'm working on and in general find it great to use as a freehand authoring tool.
In order to develop a cartoon style, I'm building my characters out of free hand coloured objects with black outlines with cel shading made from partial masked clones of the objects. This works a treat until I come to put two of the objects together and want to erase part of the outline on the topmost object where it meets the underlying one.
I thought I'd found a solution with a tip on the Xara site (at the top of the page here) where you draw the outline portion you want and combine with a second object then break the objects again. This pretty much achieves what I want, I get a filled object with the outline broken where I originally left it, however, things start to go wrong when you attempt to mask clone a part of the object you've created (for example, to produce a shaded portion of the underlying object) as it's still a line and not a shape, so the mask clone gets confused and doesn't cut out the intended area.
This must be a pretty regular requirement, particularly for people creating flash animations, so I'm sure I must be missing something or going about the construction of the image in the wrong way.
how to calculate the gross area of a portion of a building - it is about one-third of one floor of the entire building but is comprised of several rooms. I need this for both tenant area and for figuring the area of insulated floors for purposed of energy-code analysis.
Is there a way of just going about it the old AutoCAD way via a P-Line? I know there are no P-Lines in Revit, but is there an easy way of doing this?
I am trying to export a :30 spot and only :04 clips are exported.
View 1 Replies View RelatedI need to make a partial outlined circle. In other words, instead of the outline being a full circle I need it to ony be about 3/4. How can I do this in Illustrator CS 5?
View 5 Replies View RelatedI have been creating PNG's with transparent backgrounds forever, but now I need one with a transparent background AND a partial transparency area for a glow effect. Draw X3?
View 3 Replies View RelatedI have a user who is trying to plot several design drawings which all have a connection to one shape file. The file in question is used as background data for the design and is apparently fairly large. When he plots the drawings only part of the shape data comes through. Based on the information I have it sounds like the software does not have enough time to retreive all of the shape data before the plot data goes to the printer.
View 4 Replies View RelatedI want vb code that work in Visual Studio 2010 Express to create bundle to load Creating a partial CUI,lisp file and loading it inside AutoCAD 2012 .
View 6 Replies View Relatedworking with 2014 acad and i have made myself a partial CUI. it is really only one extra tab on the ribbon with a few of the standard panels i use in one place. nothing to out there. so here is a step by step of what i did to get this cui file.
entered comannd CUI in command prompt.
went to "Transfer" tab in the CUI dialog box
on the left panel it is "Main Customisation File (acad.cuix)"
on the right panel i created a new CUI file.
then right clicked the "Ribbons" path and created new "Josh's Tab"
then transfered the panels across i wanted
then saved the cui as "Josh's CUI.cuix"
then loaded the .cuix file via the "CUILOAD" command
at first nothing at all happened, so i unloaded and reloaded it. then closed and opened acad again. still nothing
so i loaded it and unloaded it a few times again. so i went back to "CUI" and had a look at my partial and it hadn't saved anything.
so i created a new tab again "Josh's Tab"
transfered the panels again and saved the file then loaded and reloaded the .cuix
when i loaded it acad "blinked" while it reloaded all the CUIs and my tab was there but no panels. i had another look at the CUI and the panels are there but not showing in the ribbon.
i have done this from 2009-2012/13 (can't remember which i was last using) and never had a problem. i have been away from Acad for the last 16months though so i figure i have just forgotten one simple step somewhere. I have the current SP installed also.
Product design suite 2014 running on a Toshiba Qosmio X870-70
I have a water and sewer line that run parallel for the most part. The sewer starts at 10+00 runs west and then turns north about 10+80 and parallels the waterline from that point on.
I want to show the sewer in the water profile as beyond and to reference the sheets to see for P&P information. This works fine.
When i go to show the waterline in the sewer profile it does not show up correctly it only shows up in the initial 80 feet of the sewer profile. Is this because the two alignments are not parallel with each other until that 2nd manhole?
See attached profile PDF.