This morning, I opened CS6 and noticed that Open Recent was grayed out. So I opened my most recent from Bridge and found almost all my settings had reverted to default, except for Menu and Keyboard Shortcuts. Workspace still had the correct name.
Â
I have CS6 Prefs saved on the desktop but I chose to rest most by hand to see if anything might foul up. It didn't so I renamed the final settings to a different workspace. In so doing, I lost my keyboard shortcuts so I had to reset those as well. Of course, I realize that I didn't have to do all that, I could have simply substituted the saved .psp, but since this revert was not as a result of my resetting prefs manually, I wanted to see what if anything might be wrong and perhaps interfere with manual settings.
Â
The strangest behavior showed up when I went to reboot the computer then open PS. It took a very long time for PS to open, and during that time a blue square would flash on screen behind the PS Loading Icon, which is something I have not seen before.
Â
Win 7 Ultimate
CS6 Extended, Cloud derived
12G RAM
148G C drive
39G Scratch
20G Second Scratch
4 core AMD processor
ATi 7750 Video
Â
Examination of Events showed no problems other than an inability to run backup today because the Backup HD was unavailable. It may have been trying to do so while I opened PS as I note several attempts to do so in Events log.
After making a second adjustment, "reset to adjustment defaults" button reset to previous adjustments made by the user, not to default values...And, secondly, only preview is resetting, sliders do not reset to previous adjustment made by the user ...
This morning line width in the Object Properties flyout were in points. This afternoon they are in mm. Where I can change it back to Points.
I've had this happen before and I understand it is probably something I'm doing but it is frustrating that these options are not obvious.
Question #2 - Is there some way to reset all possible settings/options/configurations back to the original defaults? I'd like to go back to the way things were when I first installed X3.
One of our users has managed to get the workspace kind of messed up. They have some toolbars, but only a fraction of the total, and the ribbon menus are just blanks. The odd thing is that if someone else logs on to that machine and starts AutoCAD everything is fine. We've uninstalled AutoCAD and re-installed it and it has no effect at all. The user's workspace is still all screwed up. Is there some SIMPLE way to get the program to reset to all the factory defaults or something?
how to make a partial open (saddled) and partial box (housed) stringer?
The only difference is that the open treads do not extend but are the same length as the box treads.Partial_Open_into_Box_Stair.gif Using Autocad Architecture 2012.
i'm in action schematic and if i reset any node (for example images/surface) then some parameter is still not affected. For example : the blend type and surface type and couple more are not affected by that reset function. Is this a bug ?
I create i new image with standard properties like 400x400 and 72dpi with a background color. Then i create a new layer and want to make a selection on the new layer using the Elliptical Marquee Tool.
When i do this i get the error beneath:
Warning: No pixels are more than 50% selected. The selection edges will not be visable.
I doesn't matter which size the selection has, i always get this message.
offering dark t-shirts that allow transparent PNG's to be used. Unfortunately, the printing process for dark shirts leaves white wherever partial transparency is present, which usually leaves a white halo around images and text.
Is there any way to force PS to not use partial transparency? Partial transparency looks great on white shirts, because the different printing process sees it as another form of white. It would be great to be able to toggle between usage and nonusage of partial transparency.
You can save for web in PNG-8 mode which dithers the partial transparency areas, but it also drops the color count down to a level that makes the design look bad. So far, that's the only way I can see to remove the partial transparency from already finished designs.
I am using photoshop for yesterday and it's black magic for me, so I ask you for a little favour. Namely, I owe a picture that needs new background, but just partial. Here's the link
As you can see there I am located between doors, that's good and I want them to leave untouched, but the point is to remove wall and stairs behind my back and switch it with sky, clouds texture (image). For example this one. I mean not to insert the whole background, just adequate part of it.
I capture a lot of brochures from holiday trips etc including outline maps of local areas. I then add rthese to albums, shows etc.
When I scan these, they frequently include a significant blue (sometimes grey) tint most noticeable at the edges or on folds in the items being scanned, presumably representing areas where the contact between the document and the glass is not quite as good as elsewhere.
I've tried weighing down the scanner lid, but I've not noticed any noticeable improvement.I'm now playing with the settings to see if I shoude be tweaking anything to improve this.
In the meantime, I'm left with a number of docs to clean. I've been doing this with the clone tool, but it is very time consuming.
I've been trying to find a solution to my filter problem and came across your forum. I am using PS CS2. I just started having the problem where only filters starting with A - N are showing up, I can scroll any further.
how to set Photoshop preferences as i am have photoshop 7 installed n my color settings and index mode settings is changed by me but now i want those settings to be set to its default values so tell me the exact procedure?
(eg. In illustrator if i have such kind of problem that default settings has been changed then what i do is search for aipref file and delete it so the illustrator will again start with its factory settings ) that is what i want with adobe photoshop ?
how to set Photoshop preferences as i am have photoshop 7 installed n my color settings and index mode settings is changed by me but now i want those settings to be set to its default values so tell me the exact procedure?
(eg. In illustrator if i have such kind of problem that default settings has been changed then what i do is search for aipref file and delete it so the illustrator will again start with its factory settings ) that is what i want with adobe photoshop?
I've been messing about with the Magnetic Lasso tool and want to set it to its default settings. way to reset all tools to their defaults? PSCS2s help file only mentions resetting preferences (hold down ctrl/alt/shift when cs2 starts up and you will be given the option to reset ) but that did not work.
JPEG's are opening in CS6 (32 and 64) with a partial gray/white mask in place. Resizing usually makes them disappear but they shouldn't be there to begin with. OS is Win7. The files display fine in Bridge and other applications.
I have several lovely images with a partial green horizontal colour cast caused by very out of focus bars, (without cloning!)as shown here, across tigers head!
Whenever I start up CS3 it says a bunch of defaults are missing, such as font, key shortcuts, etc. Also, whenever I use the Type key, and I highlight a area to put some type in, my program just closes down.
I am trying to open a bunch of EPS files and when the dialog box pops up, the default is CMYK and 72 DPI. So I have to manually type in 200dpi and change CMYK to RGB. I would like it to default at 200DPI and RGB so that I can avoid the aduous task of changing these every time. I never had an issue with this in previous versions of PS - which seemed to remeber what I wanted - but with CS4, it aint sticking. How can I make this the preference?
I have Photoshop CS3 and Windows XP. I used to crop pfds and the resolution stayed at the normal 72 default. Now when I crop the image shrinks very small and when I check in image size the resolution goes to 9999. But in preferences the resolution is still 72.
About a week ago my text suddenly defaults to vertical eveytime I start to enter text.. just aggrivating, I have to start typing text, then go up and click on the change text orientation button each time. I can't figure out how to change the orientation back to a default of horzontal.
I have a burning question. In CS4, when I use the Image Size command, the default units are centimetres instead of inches under Document Size part of the dialog box.
I know that keeping rulers set to inches will change that default, but I distinctly remember the time when I was able to keep my rulers set to pixels, and my Image Size to inches at the same time.
Something changed at some point and I can't figure out what. How can I keep my rulers set as pixels, but the Image Size dialog box to inches at all times?
the default colour and opacity for the Quick Mask mode? I was trying to find a way of resetting it and don't seem to be able to find such an option. I don't really want to trash my preferences file...
corel is only exporting the original palette size of 8.5 x 11. my files are 28' x 40" usually. only the part of the design that is covering the palette outline gets exported.Â
i can change the original palette size, still exports only 8.5 x 11 part of the design, doesn't shrink the design, just exports only that portion of it.
I try to load my menu at application start. But I can't see this menu in the menu bar after start. I see menu only after I "reload" current workspace in user interface customization dialog.
const String myCuiFile = @"D:Visual Studio 2005ProjectsAutoCAD 2008Cuisits.cui"; public void Initialize() { String currentWorkSpace = (String)Application.GetSystemVariable("WSCURRENT"); CustomizationSection acadCustomSection = new CustomizationSection((String)Application.GetSystemVariable("MENUNAME") + ".cui"); if (acadCustomSection.PartialCuiFiles.Contains(myCuiFile) == false)
I'm trying to run my cleanup script on a set of drawings just received from a consultant. Unfortunately every time a DWG is opened the purge fails with:
PURGE cannot be used on partially opened drawings.
Now to get the file opened NON-partially, I have to first open as partial and click the "Load All" button and "Yes" to bloodywell open it normally. Then the purge actually "works".
This needs to be done manually. Yet even after I've done this and then saved the DWG again, another normal open again gives the same error about Purge not allowed.
how to get the DWG to open non-partially when I'm running my SCR? I don't want to clean the 80+ drawings manually.
