AutoCAD .NET :: Automatic Loading Of Partial CUI
Mar 20, 2013After putting a myPartial.cui file in c:program filesmyfolder, I want to load it automatically at every next AutoCAD startup.
What are the ways to tell AutoCAD to do this task?
ADVERTISEMENT
AutoCAD .NET :: Creating Partial CUI / Lisp File And Loading It?
Nov 19, 2013I want vb code that work in Visual Studio 2010 Express to create bundle to load Creating a partial CUI,lisp file and loading it inside AutoCAD 2012 .
View 6 Replies View RelatedAutoCAD 2013 :: Partial CUI File Not Loading Properly?
Nov 22, 2013working with 2014 acad and i have made myself a partial CUI. it is really only one extra tab on the ribbon with a few of the standard panels i use in one place. nothing to out there. so here is a step by step of what i did to get this cui file.
entered comannd CUI in command prompt.
went to "Transfer" tab in the CUI dialog box
on the left panel it is "Main Customisation File (acad.cuix)"
on the right panel i created a new CUI file.
then right clicked the "Ribbons" path and created new "Josh's Tab"
then transfered the panels across i wanted
then saved the cui as "Josh's CUI.cuix"
then loaded the .cuix file via the "CUILOAD" command
at first nothing at all happened, so i unloaded and reloaded it. then closed and opened acad again. still nothing
so i loaded it and unloaded it a few times again. so i went back to "CUI" and had a look at my partial and it hadn't saved anything.
so i created a new tab again "Josh's Tab"
transfered the panels again and saved the file then loaded and reloaded the .cuix
when i loaded it acad "blinked" while it reloaded all the CUIs and my tab was there but no panels. i had another look at the CUI and the panels are there but not showing in the ribbon.
i have done this from 2009-2012/13 (can't remember which i was last using) and never had a problem. i have been away from Acad for the last 16months though so i figure i have just forgotten one simple step somewhere. I have the current SP installed also.
Product design suite 2014 running on a Toshiba Qosmio X870-70
AutoCAD Architecture :: Automatic Loading Of DLLs
Oct 24, 2011I created a dll and wanted to auto netload it upon launch of AutoCAD Arch.I have used the following instructions in URL....
"DESCRIPTION"="AutoNetloadDLL"
"LOADCTRLS"=dword:00000002
"MANAGED"=dword:00000001
"LOADER"="C:MyAppinReleaseMyApp.dll"
However, when i typed in my commands for the dll, AutoCAD displayed Unknown Command "<Command Name>". Press F1 for help.I have tried suggestions by people comments in the above link (i.e. setting acdbmgd.dll and acmgd.dll to Copy Local = False, restarting computer) , but I have done so, and the error still persists.
I also have used the method as suggested by writing a STARTUP lisp function to auto netload the dll file in URL...But the same error persists. I have used Process Explorer to check if acad.exe has loaded the DLL, and it did! But the commands are not found.
When I manually netload the dll by typing the netload command and selecting the dll, there is no such issue. This only occurs to me when I tried the auto methods.The methods only works so far if I launch acad.exe through Debug mode in VS2008.Definitely need to auto netload the DLL for my application, when AutoCAD Arch startups.
Xara :: Automatic Brush Loading
Feb 26, 2013Are any brush files located in the /templates/eng/brushes directory automatically loaded? Mine did that from a previous version and they survived the upgrade. New brush files seem to be ignored. Is there a regedit tweak for loading the files so that they do not have to be manually loaded? What has to happen to have a brush file recognized by the program so its brushes are an option in the brush menu?
View 4 Replies View RelatedAutoCad :: Make Partial Open (saddled) And Partial Box (housed) Stringer?
May 16, 2013how to make a partial open (saddled) and partial box (housed) stringer?
The only difference is that the open treads do not extend but are the same length as the box treads.Partial_Open_into_Box_Stair.gif Using Autocad Architecture 2012.
Paint Shop Pro :: Automatic Loading Of PSP When Insert XD Card
May 28, 2013When I insert my camera card into the pc, PSP comes up.
But I do not want PSP to load up yet. How do I stop PSP from loading when I insert my camera card? I cannot find the box I am supposed to uncheck.
Edge Animate CC :: Loading Symbol / Spinning Circle To Show Animation Is Loading?
Sep 13, 2013my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedEdge Animate CC :: Website Loading Slow And Preloader Not Loading
Jan 22, 2014I'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
AutoCAD .NET :: Load Partial CUI File?
Feb 20, 2008I try to load my menu at application start. But I can't see this menu in the menu bar after start. I see menu only after I "reload" current workspace in user interface customization dialog.
const String myCuiFile = @"D:Visual Studio 2005ProjectsAutoCAD 2008Cuisits.cui";
public void Initialize()
{
String currentWorkSpace = (String)Application.GetSystemVariable("WSCURRENT");
CustomizationSection acadCustomSection = new CustomizationSection((String)Application.GetSystemVariable("MENUNAME") + ".cui");
if (acadCustomSection.PartialCuiFiles.Contains(myCuiFile) == false)
[code]....
AutoCad :: DWG Forces To Partial Open Always?
Sep 28, 2011I'm trying to run my cleanup script on a set of drawings just received from a consultant. Unfortunately every time a DWG is opened the purge fails with:
PURGE cannot be used on partially opened drawings.
Now to get the file opened NON-partially, I have to first open as partial and click the "Load All" button and "Yes" to bloodywell open it normally. Then the purge actually "works".
This needs to be done manually. Yet even after I've done this and then saved the DWG again, another normal open again gives the same error about Purge not allowed.
how to get the DWG to open non-partially when I'm running my SCR? I don't want to clean the 80+ drawings manually.
AutoCAD 2010 :: Adding Partial Customized CUI
Jul 2, 2012I made a drop down menu for offset commands back on a 2010 version. I wish to bring it over but I'm having a bit of trouble. I have read through and watched a few videos and they all tell me the same thing. Go into the CUI, click on Load Partial Customized File. I do this, select my cui file and I get an error that says:
Partial customization file cannot have the same Customization Group Name as the main customization file.
The name of my file is OFFSET MENU. I'm running 2012 version and I have finally gotten almost everything setup except for this.
AutoCAD Architecture :: Partial Hip Gable Roof
Sep 5, 2012How to make hip roof turn gable part way up the roof instead of at the bottom (which would be a gable roof).
View 7 Replies View RelatedAutoCAD 2010 :: Common Ribbon Tab In Different Partial Cui
Apr 11, 2012I have a lot of tools with separate installers. But the ribbon- panels merge in one ribbon-tab.
View 4 Replies View RelatedAutoCAD .NET :: How To Add Partial CUI File Tab To Current Workspace
Sep 24, 2013I'm having difficulty accessing the Customization Section for a particular Partial CUI which I need to return the Ribbon Tab Source using AutoCAD 2012.
Here's the snippet
var cuiMain = (string)Application.GetSystemVariable("MENUNAME");
var csMain = new CustomizationSection(cuiMain);
//*** This line return null even when the PartialCUI exists? ****
CustomizationSection csPar = csMain.getPartialCUI("myPartialCui");
[code].......
AutoCAD Civil 3D :: Partial Load Cuix
Jul 5, 2013Messing with creating a Partial CUIX ribbon, new to this with using macros, I have a general understanding. Created a pulldown for creating existing electric polylines, I have macro setting both to the same layer, but not sure how to get so linetypes are different for both. One would be underground and the other would be overhead.
View 1 Replies View RelatedAutoCAD Map 3D :: Shape File Only Displays Partial In Plot?
Sep 12, 2013I have a user who is trying to plot several design drawings which all have a connection to one shape file. The file in question is used as background data for the design and is apparently fairly large. When he plots the drawings only part of the shape data comes through. Based on the information I have it sounds like the software does not have enough time to retreive all of the shape data before the plot data goes to the printer.
View 4 Replies View RelatedAutoCAD Civil 3D :: Partial Parallel Pipes In Profile
Sep 6, 2013I have a water and sewer line that run parallel for the most part. The sewer starts at 10+00 runs west and then turns north about 10+80 and parallels the waterline from that point on.
I want to show the sewer in the water profile as beyond and to reference the sheets to see for P&P information. This works fine.
When i go to show the waterline in the sewer profile it does not show up correctly it only shows up in the initial 80 feet of the sewer profile. Is this because the two alignments are not parallel with each other until that 2nd manhole?
See attached profile PDF.
AutoCAD Inventor :: View Rep Associativity - Only Partial Integration
Dec 2, 2013When placing a new part/assy into an assy, the current assy view rep is assigned to the inserted part view rep where the name convention matches,
But, where other view reps may be present, the place part/assy event does not match up and auto assign other elligable view reps.
AutoCAD Civil 3D :: Polygon Shape With Partial Fill Used In Linetype
May 23, 2013I've made a shape (attached image) and am trying to find a way to use it for a linetype. However, I'd like to have the left and right "blocks" filled (hatch or whatever) so that when used repeatetively in a linetype, the filled and open spaces will alternate. I may change it to be only 2 blocks or 4 - haven't decided yet.
I've made linetypes with simple line shapes, but never one like this.
I have exported the 3 polygons through the Map Drafting ribbon --> Export and then brought it back into CAD. This gave me 3 adjacent filled polygons (3 seperate objects) and I don't know how to show it as one shape entity, much less without the middle fill.
Is there another way I can accomplish this without the use of shapes?
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
AutoCAD Inventor :: Sheet Metal Flange Only On Partial Edge
Dec 14, 2012I have a sheet metal part where I selected an incorrect edge when creating flanges, is there an easy way to deselect the edge? I can add edges and I can select the glyph for a specific edge to edit it, but short of deleating the feature and starting over I have not found a good way of deselecting an edge.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
AutoCAD Inventor :: Sheet Metal Flange On Partial Edge
Dec 14, 2012How can I define the length of a flange in a sheet metal part? In other words, I would like a flange to run a definitive length along the edge of a part, not the entire edge of a part.
View 1 Replies View RelatedAutoCAD Inventor :: Centerlines In Section Views Of Partial Cylindrical Parts?
Jul 15, 2013I'm currently detailing a part that's about one-third of a cylindrical piece (the part is lathed as a whole and cut into thirds). I'm trying to project the centerline onto the section view so I can ordinate dimension to it.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Shortcut Menu In Partial Menus?
Aug 26, 2008I have made an extra CUI that is loaded as a partial CUI.
Now I want to add a context-sensitive shortcut menus like this: POP504, OBJECT_AEC_DOOR.
The problem is that this shortcut menu only shows up if I add the shortcut menu to the main CUI file. If I add it in some partial CUI it never shows.
Does shortcut menus only work from within the main CUI?
AutoCAD Visual LISP / AutoLISP :: Delete Toolbar From Partial CUI Menu
Feb 15, 2013I have a company .cuix menu that is loaded as a partial menu to the main acad.cuix file. I want to delete all the toolbars and pull down menus associated with it and leave the other stuff in place. This is in Autocad 2011 but should also translate to 2013. So far, I have tried opening the CUI menu, going to the company.cuix partial menu and deleting the toolbars. Then I hit save, then Apply. Toolbars disappear and pulldown menus go away. But when I reload AutoCAD they come back.
View 1 Replies View RelatedAutoCAD Print / Plot :: Background Mask Plots Partial Black On MText
Oct 16, 2012I have this problem with my MText Background Mask. You can take a look at the two attachments. Each one gives me the same issue, but with different MText objects. I'm also plotting to a KIP5000 and a SHARP All in One, and I get similar results, except in some of the MText, they come out in a random color as well. The pc3's for all devices are set to Lines Merge.
The text is actually part of an xref file, and if I plot directly from the file they are in, I have no problem. I did a test where I copied the text into the sheet file, and got similar results when the text is in modelspace, and I got my intended results when the text is in paperspace. Now, this is the way I want to go...but the company standard is to draw it all in the xref, so I have to figure out how to get around this.
I've gone back and forth with the Merge/Overwrite options in the pc3, and when plotting to PDF and SHARP, I get the correct output with Overwrite, but the KIP just completely ignores the background mask with Overwrite.
AutoCAD 2013 :: Plotting - Partial Print Showing Drawing Above Diagonal Line
Aug 23, 2012A plotting issue that has never been addressed perplexes me! When working in a paperspace layout and trying to plot or print by window or display, I get a partial print or nothing at all. Typically, I will get a partial print showing the drawing above a diagonal line. This has plagued me through many versions of Autocad.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Partial Cuix - Adding Commands To Shortcut Menus
Oct 17, 2013I'm able to add custom panels/buttons into the Ribbons, by cloning the existing ribbon (from acade.cuix) into my partial cuix. However.. I'm not able to add more commands to the shortcut menus, using the same technique.
Is it possible to add custom commands to existing shortcut menus using a partial cuix?
Photoshop :: Partial Selection
May 29, 2003I create i new image with standard properties like 400x400 and 72dpi with a background color. Then i create a new layer and want to make a selection on the new layer using the Elliptical Marquee Tool.
When i do this i get the error beneath:
Warning: No pixels are more than 50% selected. The selection edges will not be visable.
I doesn't matter which size the selection has, i always get this message.
Photoshop :: CS6 Partial Reset To Defaults
Sep 15, 2012This morning, I opened CS6 and noticed that Open Recent was grayed out. So I opened my most recent from Bridge and found almost all my settings had reverted to default, except for Menu and Keyboard Shortcuts. Workspace still had the correct name.
I have CS6 Prefs saved on the desktop but I chose to rest most by hand to see if anything might foul up. It didn't so I renamed the final settings to a different workspace. In so doing, I lost my keyboard shortcuts so I had to reset those as well. Of course, I realize that I didn't have to do all that, I could have simply substituted the saved .psp, but since this revert was not as a result of my resetting prefs manually, I wanted to see what if anything might be wrong and perhaps interfere with manual settings.
The strangest behavior showed up when I went to reboot the computer then open PS. It took a very long time for PS to open, and during that time a blue square would flash on screen behind the PS Loading Icon, which is something I have not seen before.
Win 7 Ultimate
CS6 Extended, Cloud derived
12G RAM
148G C drive
39G Scratch
20G Second Scratch
4 core AMD processor
ATi 7750 Video
Examination of Events showed no problems other than an inability to run backup today because the Backup HD was unavailable. It may have been trying to do so while I opened PS as I note several attempts to do so in Events log.
Photoshop :: Partial Brightening A Picture
Jun 26, 2013How do I partially brighten a picture. I use the magic tool to select the area that I want to brighten, however, it left a white outline.
View 4 Replies View Related