RAW and open edit all my RAW files in Bridge 4.0.5.11 (CS5). All goes well here until I send the images over to PS5, where upon opening there, they all seem to have a much warmer, yellowish cast.Have I possibly gotten something set wrong in Photoshop that causes this wierd off-color cast?
View 1 RepliesAfter upgrading PS CS6 to 13.0.1, HDR Pro now renders terrible colors. The reds seem to be missing and there is a pea-green cast to everything. The screen capture from LR shows two 32-bit images made from HDR Pro the one on the left was created 9/19/2012 on the right was created 10/27/2012 after having upgraded CS6 and LR4. The color space in Photoshop is Prophoto
View 26 Replies View RelatedI'm trying to add a color cast to a grey, contoured button shape (defined by a vector mask), by overlaying it with an adjustment layer with a solid green fill and setting the blend mode to "multiply."
Â
The shape layer has transparent pixels around the perimeter, so I would not expect a "multiply" operation to result in visible green there. But it does. That's no good. I need to export this image to a PNG with the transparency intact.
Â
I can see that the green adjustment layer has a "Color Fill 1 Mask" channel, but copying the shape layer and pasting it into that mask channel doesn't seem to work. The display shows a very thin outline of the vector shape, but I can't appear to do anything with it.
I have some photos I took at a car show. Unfortunately, the event was held in a garage under horrible lighting. It gave everything a yellow-orange cast. What is the best way to remove or shift the color cast to more natural light. I tried Channel Mixer to some good effect. I have attached a sample image. I realize it may be hard to recover anything, but I'm just interesting in the technique.
Note in the image, there is almost no blue. The Channel mixer allows "converting" some of the other light into blue. I'm I on the right track?
PS CS4. Everything seemed to go fine, but now all of a sudden his images are displayed with a strong yellow tint. I don't mean a slight color cast, I mean a STRONG yellow tint. The images appear the same in Photoshop, the Bridge, and even ACR. I re-calibrated the monitor (Gretag McBeth) and generated a new profile just be sure, but that wasn't it. The same images viewed in other applications (Picassa, opened in a browser, etc.) on the same computer display normally. This appears to be only Photoshop related. What's also interesting is that CS3 now exhibits the same problem after the CS4 install. I reviewed all the color settings and workflow, and nothing is out of the ordinary. The Nikon raw images were imported via ACR, and opened in Photoshop with ACR workflow options set for 16 bit/Adobe RGB. Photoshop working space is Adobe RGB. I also installed the 11.0.1 update. But here are what may be a couple of clues. First, it's not just the image files that look bad. The colors are awful in the color picker in the toolbox. The entire color picker slider is almost all yellow and orange. And here's another good one. We tried importing some new raw images via the photo downloader in Bridge. With the downloader in Advanced mode, the image previews before download show the same yellow cast. But after I click the Get Photos button, the image colors appear correct as they flash on for a couple of seconds while being downloaded. This has got to be a big clue for someone. What's different about how the image is displayed during that two second preview during the actual download? The PC hardware is a 3.2Ghz Pentium 4 Dell tower (2G ram) running XP Pro w/SP3, with a nVidia GeForce 7800 graphics card, and the screen resolution is 1024x768. I'm thinking maybe a graphics card issue or corrupted system profiles, but I'm a Mac and he's a PC so my PC troubleshooting skills are limited.
View 2 Replies View RelatedI have this image with an intense orange background.
I want to change the color of the background to a light green, or even white (depending on my boss' mood). But the background color leaves me with an undesirable orange color-cast on the old man.
this is only a very rough clipping, the final version will be well refined.
way to eliminate this color-cast, most noticable on his hair. How would you go about it?
remove the offending color cast on this photo.
I've tried different techniques but so far i'm not there yet.
ignore the black eyes. it was done to protect my friend privacy.
My printouts are getting a greyish color cast!?
View 5 Replies View RelatedI tryed first time this feature and disappointed allready.The result of three layers to assets given 3 darken colorcasted images.
This last one is exported with Save for web feature and got correct colors.Original document is on srgb color so it should be right in first place?
I am learning to neutralize color casts in PS6, and one way I found was through this website:Â [URL] ..... which proports to teach Photoshop.
Â
In using their examples, in step 1 new adj layer, pick photo filter, fine.
Step 2 it says to click on color, which opens up the color picker dialogue box, and move cursor, which turns into eyedropper over the color you want to change and click on it. It is supposed to sample the color and change the color in the color picker dialogue box.
Â
When I click on the color, what comes up in the color picker window is WHITE (for new color), split with the original color of the filter. I cannot get it to come up the color I am picking. I cannot get it to come up without the split color in the box. Even if I change it to only use Gamut color, I still get a split box with white as my picked color.
Â
When I use'command-click' on the color I want to sample, it changes the color in the image, instead of just sampling it for the (new) color in the color picker, so I it changes the original color in the image and I cannot use the information.
Â
When I don't use a New Adj layer and just do it on the image, itself, it works.
I learned from Scott Kelby's book on a technique to remove color cast.
What is the difference between color cast and correcting white balance?
I had incurrect setting when taking some pictures, which turned the pictures blue. Is there a way to correct this in Elements 9?
View 5 Replies View RelatedWhat is the keyboard shortcut for remove color cast and for brightness/contrast?
View 1 Replies View RelatedMy Nikon D7000 raw files all have a magenta cast to them when imported into Adobe Lightroom 3.5, and I wasn't shooting on multiple exposure. I am running Windows 7 64-bit, and have Adobe Photoshop CS4 as well as a trial version of Adobe Lightroom 3.5 (testing to see if I would like to buy as I can't read my raw files in CS4).
Â
If I convert my raw files to DNG, and then view them using camera raw (CS4), the magenta cast is gone. However, if I view those same DNG files with Lightroom, they have the magenta cast. I have tried re-importing my catalog, but every time they all have the same strong magenta cast.
I used the Lightroom beta 3.5 beta with CR 6.5 beta and now have installed the update of these two products. In beta I was able to open Phase One IQ raw files just fine but now with the 3.5 release I obtain a funny Magenta color cast that displays in the Library Mode and thumbnail but does not display in the Development Mode. This happens on both my Mac Laptop and workstation. Mac OS 10.6.8. I have not yet tried uninstalling LR and reinstalling, will do that next. The first image is in the Library mode after I have opened the file. The second is from the Development Mode. Notice how the tumbnail at the bottom remains constant but the small image on the left has changed in the Development mode to its natural look.
Â
I should say that this color cast happens after I adjust the temperature settings of the image, not just from mearly opening it in Development.
The colors on the computer monitor do not match the colors of my printed photos. The pictures have a yellow color cast. I am printing using HP Photosmart 7520.
View 1 Replies View RelatedLR4.2 gives some ugly magenta color cast on deep shadows especially at high iso pictures. Nikon Capture NX2 gives them too, but not so heavy. If I push the shadows at iso 1600, they are all magenta. Is it related to the beta state of the D600 support? My D700 is at iso 3200 in deep shadows completely black (only luminance noise), even pushed. Is there a possibility to correct that issue with LR (high iso blackpoint correction)? The shadow color tint correction from the calibration option is not really a solution, because it does not only correct the deep shadows, so the other shadows get a green tint.
View 15 Replies View RelatedRight now I am working on a Win 7 64 computer and have a Canon MP810 printer. I read the materials on color management and set my color management in "Print" in Lightroom 4 to "managed by printer".  My printer color management in advanced settings is set all to defaults. When I print a photo from Lightroom 4, there is a distinct magenta cast to the entire photo, but it's most observable in midtone neutrals. A burnt out section of a lightbulb goes white, for instance, but greys seem to go pinkish, greens to a rust, etc. I also printed the same photo from a windows file, using Windows 7 print mode. That photo seemed to go slightly magenta in the neutrals but not nearly to the same degree. what I might try or test to see if I can get my print colors more accurate?
View 3 Replies View RelatedJust got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast. WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync. I used to have an espon 2400 which worked just fine.
Â
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
The fresh install of LR 5.2 renders all images - RAW and JPG - throughout the program with a very dark, green-yellow colorcast. The only place where images appear normal is in the Import dialog, while the thumbnail mode is active. Apart from that, every program module features this annoying reproduction. Here are some supporting screenshots (red rectangles are from me):
Â
Import screen - thumbnail view - OK:
Â
Import screen - preview - NOT OK:
Library view - NOT OK:
Â
Strangely enough, if I export the picture to JPEG - without any modifications - the image appears normal again:
 LR version: 5.2.1, 64b (tried the 32b version too, same error)
OS: Windows 8, 64bit
Camera: Canon 40d, imported images are RAW.
Well, it looks like I edited an image in ProPhoto RGB and now when I save as JPEG I get a color change (always looks warmer, like a change in white balance.)
Â
When I convert to another profile, the color change. Is there anyway to either convert and get my colors back or as to JPEG with the color's I'm getting in photoshop? What is odd is I'll see a nice white background in PS and even in the thumbnail. But if I open it in anything but PS I get color change.
I have a Nikon D7000. Most of the pictures I make are RAWs (NEF). I work often with my own camera-profiles (landscape, vivid, portrait, etc.). One of these profiles is black & white with a touch of sepia. Now, when I open it with PS, the picture is coloured, not B/W. And I can´t find a way how to convert it exactly to the same JPG or TIF like the RAW picture. In the PS-RAW-menue there are only the standard profiles, not mine. Is there a possibility to load my profiles?
View 2 Replies View RelatedI have a jpg(not from camera) grey scale/8bits I save it out as a Photoshop RAW. I leave the raw options set at Header=0 and file type PRAW and file creater 8BIM.I think everything is ok. I then open a seperate converter program called Contenta RAW Converter. I get error "could not load raw image.Now the question is. Is my photoshop RAW file valid? Do I have to enter in a header number or something for my RAW image to be valid?Since my image is not from a digital camera it doest have a header so I am wondering if I have to add one in order for my RAW image to be valid to be opened in another program?I want to use this other converter to change my raw into a bitmap.I dont want to use photoshop as my converter program but thats another story.
View 5 Replies View RelatedI'd like to combine two different RAW exposure settings into a single JPEG. I've done this in the past by importing two RAW files at different exposure values, then selecting from one photo, feathering, and copy/paste into the other photo. This proved to be very time consuming and no where near perfect.
I thought Photoshop CS2's "Merge to HDR" function would be ideal for automating this process, but it won't take the two different RAW imports as input because it knows they're from the same photo.
it took some effort, and i dont remember all of what i did, but i finally got bridge to stop making auto adjustments on my raw images--though it still does if i zoom in when im full screened.
Â
regardless, when i open a raw image in photoshop, it makes auto adjustments (and they are always hooorriblee).
-all the boxes under default settings are unchecked
- i select 'as shot' for white balance,
and so on; but without fail, every time it makes these ugly over saturated over contrasty or otherwise hideous versions of my images.
Â
im not buying the whole 'digital negative' deal. i can see a full view images of my nondestroyed raw image, and seriously there needs to be a point to all the work i do on set to to get the right light and colors, and so on... im about to reinstall photoshop.
Â
if i dedicate a lot of time, effort, and frustration, i can get them close to what they were, but its so impractical and frustrated to input this additional time for work.
When exporting my edited pictures to a folder in m Pictures it goes as a blank soft color but no photo. It looks like a tiny dot and when you open it, it is a soft color..
View 10 Replies View RelatedPerhaps a bug? raw files from sony rx100 all come in cropped in LR 4.2 beta . When I select all and batch "uncrop" them, I get an " internal error " I use 5 mb raws.
View 5 Replies View Relatedhow to change the default settings in Camera Calibration (ALT changes the Reset to Set Default) and from what I can find, any newly imported RAWs will have these defaults applied. how do I apply these defaults to images already imported?
Â
Also, what I specifically want to change is the Profile: Adobe Standard to Profile:Camera Landscape (for example) and apply that to all the images I already have shot with this specific camera body.  So, two questions: Does setting the defaults include the Profile or is it only the "Shadows, Primary Red, Green, Blue" that gets saved as a new default and can these changes only be applied to newly imported RAWs?
I'm running OSX 10.8.4 with LR5.0 and CamRAW 8.1 installed. My LR Catalog is on local Disk but the corresponding images are on a mounted NAS filer. I need to import (copy) a large amount of RAWs, but LR hangs unperiodically durring import. While trying to kill LR (or reboot) my iMac freezes such, that I need to power off!
View 1 Replies View RelatedI have Photoshop 7 installed and it's been working fine.
However all of a sudden i started having problems with the way PS opens images.
Say I take a picture with a camera, review it in Irfanview, and the decide to play with it in PS. The problem is, that the image look different in PS, than it looks in reality. I simply drag and drop the image from the folder into photoshop, and when it opens up, it's a lot brighter than the original, almost washed out.
Sample attached.
Does anyone know what the problem could be? It wasn't doing it before, it started suddenly, without any modifications to PS or the system (that I know of). I've tried reinstalling PS but no help.
When I try creating a color balance adjustment layer is it opening a levels adjustment layer. I'm using the New Adjustment Layer button at the bottom of the Layers panel. Is this a bug with CS6? How can I fix the problem?
View 10 Replies View Related