AutoCAD 2010 :: Setting A Lineweight For Dimension Objects
Feb 27, 2012
Setting a lineweight for the dimension objects,As the dimension object contains: text, dimension line and extension line and behaves as a block, then why the arrowhead (oblique) of the “dimension line” doesn’t follow the lineweight chosen for all the dimension objects?why the "arrowhead" (oblique) is thicker than other dimension elements?
Is there a way to automatically display the dimension of lines or objects as you draw them? I looked at dimensional constraints, but AutoConstrain doesn't seem to have an option to automatically apply dimensional constraints....right?
I have tried and failed to set line weight of object after baseview command. Its very thick line and showing the 2d object views in very bolds lines when i am trying to take print it is horrible to see it.
Im trying to print a logo for my detachment using Autocad to PDF but for one the line dont show up in the PDF file and second the original color of the drawing is faded. Black goes to a smoke grey color, lines dont show up, and the red is blurry. I need this to be fixed but I just dont have the skill to do it. And stupid autocad doesnt have a contact number for step by step instructions with an actual human! Im trying to use the logo for a T-shirt but it seems like I cannot for the life of me print a suitable digital image for it. I am using AutoCad ARCH 12...
Using AutoCAD 2011 we always use 0.00 as our default line weight but the default will change to 0.010 with no real pattern. It can be any drawing at any time. We have reset this dozens of times without being able to stop it from reoccurring.
We are also not able to get line weight to display (yes we check the Lineweight Settings, Display lineweight box) again on random drawings at random times.
Is there a way to set the “lineweight” to be Color-based automatically?
I’m wondering if there is a way to set the lineweight to be color-based such that all the objects have the same color will take the same lineweight automatically.
Sure, we can control such behavior through the “bylayer” feature but I’m not sure if this very particular behavior might exist in the AutoCAD; color-based lineweigth!
I have an xref in my drawing. I am trying to use a VP override to make a layer plot with a lighter lineweight. I have changed the layer to number 9 (set to plot light) in the viewport and the layer changes color. When plotting the layer does not plot with the correct lineweight. The object color on the layer is set to bylayer. Visretain is set to "1" What is wrong? Why isn't the layer plotting correctly?
i'm making an isometric drawing. so i use oblique command everytime i need to convert dimension oblique at 30 degrees. is there any setting that the default system gets to this oblique thing so the action of selecting Dimension> Oblique doesn't need to be repeated? just like we switch ORTHO on and off , is there a setting for oblique dimension on or off too? i'm using autocad 2010 LT
Any method to set all the Tolerance Types for a GeneralDimension via VBA.
The Tolerance object, accessible via the GeneralDimension object, offers methods to set Deviation, Fits, Limits & Symmetric tolerance types, but I can’t find a way to set other Tolerance types, such as Reference, Basic, Max & Min
Looking for the method to query oDrawingDims.Tolerance. to see if SetToSymmetric (.0625) is the current value for a given dimension.
oDrawingDims.Tolerance.Type results in 50377984, no matter what method is active in the dimensions.
From Here. You get the Loop to reset,
'symmetric example' Set a reference to the select set of the active document. DimoDocAsDrawingDocumentoDoc=ThisApplication.ActiveDocument' Find all selected occurrences and add them to an ObjectCollection.DimoDrawingDimsAsDrawingDimension'Loop through all dimensionsForEachoDrawingDimsInoDoc.ActiveSheet.DrawingDimensions'set Tolerance MethodoDrawingDims.Tolerance.SetToSymmetric(0.5)Next
As well as this code to reset to default if a tolerance falls with in a certain set values,
' Set a reference to the select set of the active document.DimoDocAsDrawingDocumentoDoc=ThisApplication.ActiveDocument' Find all selected occurrences and add them to an ObjectCollection.DimoDrawingDimsAsDrawingDimensionForEachoDrawingDimsInoDoc.ActiveSheet.DrawingDimensions'Loop through all dimensionsIf oDrawingDims.Tolerance.Upper = ("0.15875") And oDrawingDims.Tolerance.Lower=("0")oDrawingDims.Tolerance.SetToDefaultEndIf Next
Autodesk Inventor 2010 .idw Drawing Detail - Where is the default setting for "Full Dimension Line" so that I can set it to always be on when placing a linear diametric dimension? I would prefer to turn it off on the few occasions when dimensioning a diameter on a Detail View that does not include the center line rather than each and every diameter on a section view. This is necessary because a diameter symbol does not show up in the diameter dimension unless the full distance line it is selected, which is not always possible. I am aware of the Application Option setting that allows Linear Diametric as a preference, which becomes the default for all dimensions, and it is user specific rather than document specific.
We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
Revit 2010.I'm trying to change the temp dimension size. (Can read the 8pt.?) I've looked at the .ini file and don't see where I can change it. I've also read where it can be changed via some 'option'. Under which tab and panel is the 'option'?
I was told by a customer that he has AutoCAD 2D but that their platform also contains supplementary information regarding the "third dimension", for places, objects, etc ...
If this seems possible to you with AutoCAD 2D, I am wondering where all these data could be accessible for transfering the DWG, including the 3rd dim data, to external platforms ? (in our case 3D virtual worlds) ?
I'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
Something changed in my settings & I don't know how to chance it back. I can't click on to select objects inside or behind objects. What do I have to change to be able to select any item I click on regardless of where it is?
Trouble with embedded OLE DWG objects in word 2010 not opening with AutoCAD 2012
We have a user that can't open some OLE DWG files from within a word document. He had 2010 AutoCAD LT on his machine for a while then was upgraded to 2012 AutoCAD (non LT) once that was there LT 2010 was unistalled. since then he has not been able to open certain embedded OLE files within Word. Other users that have other ever had AutoCAD 2012 have no issue opening this embedded DWG files.
i found this thread (URL....) which sounds exactly what is going on with my enduser. But the fix provided is for AutoCad 2000-2012 not the LT versions.
I am using autocad 2013 primarily and other employees are using 2010. I am saving my drawings as 2010 and for me there are no issues. On the other hand people using 2010 are having objects missing in the drawing. All layers are turned on and all thawed. The primary objects missing are AEC objects. Is there a switch to show or hide these object?
I have a 3d object located in model space and have opened up a view port in paper space to view the object. Now I have set up everything as I want this includes several other view ports not showing the 3d object. my problem is that I can use the hide command in the view port containing the 3d object and get the image I want. However switching tabs or doing just about anything causes the 3d object in the view port to revert back to wire frame. Is there a way to lock just the one view port with hide mode on without effecting the rest of the view ports?
I have recently installed autocad 2011 mac version, i want to change 3 wheel setting from panning to zooming i changed mbutton pan from 0 - 1 but still its not working, i changed zoom wheel from 0 - 1 but its not working and in mac mouse settings are pre installed.
My viewport scale list only has metric and I would like to add a list of imperial scales for general use. So far I can only add, through Annotation Scaling panel and Scale list for an individual drawing so once it is closed I lose the scales.
how do I list my imperial scales permanently for use throughout the program.
Is there a way to change the default arc type in AutoCAD 2011? Currently, the ARC command defaults to "Start, End, Radius". I would like it to default to a 3-point arc.
Is it possible to change the dimension style somehow, such that it adds 3 units (in this case inches).I have a client that wants the neat length of the pipe given above the dimension line, and the length with extra sock below the dimension line.
