I was told by a customer that he has AutoCAD 2D but that their platform also contains supplementary information regarding the "third dimension", for places, objects, etc ...
If this seems possible to you with AutoCAD 2D, I am wondering where all these data could be accessible for transfering the DWG, including the 3rd dim data, to external platforms ? (in our case 3D virtual worlds) ?
I have a complete gearbox drawing from a previous work and I would like to use it again but with different dimensions.
If I edit the dimensions and enter different values its not enough because when I hit the inquiry tab and dimension, obviously it will be the old measure value.
My question would be how to change the whole drawing to a new dimension values? I think there is no need to redone the whole gearbox again with new dimensions. My drawing is in metric (millimeters).
I'm using Inventor 2013. I created an assembly where I did a lot of top down modeling (meaning components in the assembly were created in the assembly. All but a handful of the components are adaptive to other components). When I went to make my drawings for having the components made, I started noticing that some of the dimension values were wrong. I could go into the model and verify the features, but when dimensioning on the drawing it would not match. Furthermore, this didn't occur on every dimmension on the drawing. Not even half of them were incorrect, but it only takes one to really mess up a part.
I've attached a screen shot of what I'm seeing. The 15.2 and 5 dimmension are correct, but obviously those don't add up to 31.37. I know I can manually override this dimmension, but only if I know to do it. I tried to do a drawing of another part in the same assembly and eventually found a similar problem.
Finally, I created a step file of the 1st part (to strip away the adaptivity) and when I created the drawing again, the problem went away.
My question is, is there something I did in the assembly / creation process that would have caused this?
I am currently endeavoring to translate some (very) old print drawings of standard geometry used by my company to electronic format with Inventor. Many of these standards include a matrix of certain dimensions (noted by a letter variable on the drawing, such as "A") and what their values should be, given the required size of the geometry's main feature, like the cross section of an o-ring that is supposed to go with it. Is it possible to build such variable/multiple value dimensions in Inventor and have a corresponding matrix printed on the drawing with it?
View 1 Replies View RelatedWay to round decimal dimension values to the nearest 1/16"? For instance, 43.0599 would display as 43.0625 (On a drawing). Tried playing with tolerances, but thought it would be better addressed as customization.
View 2 Replies View Relatedif it is possible to increase the number of recently used values/parameters in the dimension dialog, during part sketching. For one part, I use approximately ten parameters that will be used repeatedly. When I'm done with one sketch and start with the next, only the last five parameters are in the recently used parameter list. (Create dimension --> select arrow on right side of dialog, see attachment Dimension_Dialog.jpg, excuse me for the poor quality ). It would be much more comfort to have more parameters in this 'recently used'-list.
Furthermore I'd like to know if it's possible to widen the parameter-list. In my case I've several parameters that start with the same prefix, followed by a differentiating suffix. When I create a new dimension, select the arrow on the right and select 'List Parameters', I have to adjust the width of this dialog every time to see the entire parameter. (see picture Dimension_parameters.jpg)
I would also like to know how to dimension objects in 3D.110501072208-62207.zip
View 2 Replies View RelatedI'm designing a catalog with some prices, every product have a code. Working with layers, I can group 3 objects: A produtc photo, the price and the code. So I rename the group to the code of especified product.
As we see, I can identify the groups, and by code I know what the product I'm working on. I think it's a very organized way to work.
Here the question:
Can I load the prices values from a txt file? I'm using X5.
When I quick dimension my objects it is shown in inches, I want it shown in feet according to scale, 1/8"=1',1/4"=1' etc.
View 9 Replies View RelatedSetting a lineweight for the dimension objects,As the dimension object contains: text, dimension line and extension line and behaves as a block, then why the arrowhead (oblique) of the “dimension line” doesn’t follow the lineweight chosen for all the dimension objects?why the "arrowhead" (oblique) is thicker than other dimension elements?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
In AutoCAD, or some 3rd party software perhaps.
Is there a way to automatically display the dimension of lines or objects as you draw them? I looked at dimensional constraints, but AutoConstrain doesn't seem to have an option to automatically apply dimensional constraints....right?
I am having some trouble adjusting the dimension scale to match blocks and objects in my drawings.
View 1 Replies View Relatedi am opening file in autocad 2013, my all dimension tags and text and point are merged with my other drawing objects how can i separate.
View 1 Replies View RelatedI have an attribute blocks and this att block has two tag values , is there a simple code for to change 1st tag values automaticly according to 2nd values ?
for example :
1st tag (50x50) - 2nd tag ( 100 ) ==> 50x50-100
if i enter 201 valuse to 2nd tag then 1 st tag has to change as 100x100
if i enter 501 valuse to 2nd tag then 1 st tag has to change as 150x510
I attached a jpg file for explain much better
Is there a way to have no layer value set for the description keys. I set all the layers, and now I realize I'd rather set this to no layers (boxes are all unchecked). I'd rather see no value under the layer column, but there doesn't seem like a way to set this.
View 1 Replies View RelatedCan AUTOCAD sum values that are entered as text values? Attached is a table text whose right final values should be all sumed up? Is this possible inside AUTOCAD?
View 9 Replies View Related Scale Stroke and Effects Option Odd Behaviours. If multiple objects selected and they're scaled in only one dimension, Illustrator assumes this to be a scale in 2 dimensions.
Is there a work around for this?
I have a subdivided plane that I wish to scale horizontally to match another objects dimensions. In cinema 4d I can check an objects width and then just put that number into the other object width input.
View 4 Replies View RelatedI'm trying to show, using the eyedropper tool, the actual values of pixels in an 8-bit grayscale image (Mode command confirms that's what's there). In the Info panel, the eyedropper tool displays percentages for every type of color information (K, CMYK), while the "8-bit" field remains blank.
View 9 Replies View RelatedI'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedI have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedIs it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View Relatedhow to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies View RelatedIs there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedI want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View RelatedIs there a way to make the linear dimension a diameter dimension?
View 9 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.