Is it possible to change the dimension style somehow, such that it adds 3 units (in this case inches).I have a client that wants the neat length of the pipe given above the dimension line, and the length with extra sock below the dimension line.
View 4 Replies
In AutoCAD 2012 My dimension style/scale seems to change automatically. I'll add one dimension in paper space,and then the very next dimension will be in a different style. It will say 30" one time, then 400" the next. Seems like it picks its own scale randomly. It happens with the default dim styles as well as custom styles.
View 9 Replies View RelatedI am working with a point cloud and want a dimension that will call out the Z value of a selected node. Is there a way to adjust an ordinate dimension to report the Z value instead of Y? If not, is there another way to do this?
View 4 Replies View RelatedUsing (plain vanilla) AutoCAD 2012 I've been getting a funny error: After working normally and without problem for some period, suddenly every time I open a drawing I get an error message that says "AEC dimension: opening / door / window associativity initiation failed". The error appears each time I open another drawing until I shut AutoCAD down and restart it.
View 4 Replies View RelatedAll of a sudden this morning when I dimension something, my dimension text is upside down. It is only on one drawing and only on new dimensions. why nad how to correct?
View 3 Replies View RelatedI am working in inches so I set my dimension units to Architectural. When I am dimensioning a distance that is twelve inches I would like the dimension to read 12" not 1'. I would like to set up the dimension style to report this dimension automatically without editing the text manually to change 1' to 12". Is there a way to set this up through the dimension style?
View 9 Replies View RelatedHow to make dimension annotation automatic..? cause I have ever watching in youtube...on autocad 2011...
View 1 Replies View Relatedare there any possibilitys that i can change my dimension style in a way that dimensions with less than a meter are shown as centimeter, for example 0,50 (m) are shown as 50 (cm).
View 6 Replies View RelatedWhat or where is the setting to change the dimension value input to automatic rather than accepting the default every time I put a dimension in? I don't want to be prompted for input.
View 8 Replies View RelatedIs there a way to move the horizontal text of a vertical dimension that's outside of the extension lines to the right or left?
This was possible years ago with a simple stretch or moving of the text grip. Now, if the dimension is above the extension lines, the text is to the right. If it is below the extension lines, the text is to the left.
I am attempting -- without much success -- to put my dimensions in paperspace. The problem is that sometimes (almost always) the dimension value is in paperspace. That is, when I do a Linear Dimension of two points of an object while in paperspace the resulting value will be a few inches instead of many feet.
My model is drawn at full size; my viewport is set to 1/4" = 1'-0"; I am using ACA 2012.
I am not sure if it instructive, but I have found:
- The only time it comes out correct is if my first point is at 0,0. But if the second point is 0,0 it will be wrong (paperspace value). Bizarre
- most of the "wrong" dimensions have the "Associative" property set to "No". The box is grayed out so I am not sure how to change it.
- If I MEASUREGEOM, the value is the correct model space length but if I do a linear dimension using the same two points the value is in paperspace.
After creating a parametricly dimensioned, fully constrained, 2D drawing I wanted to add a couple of annotative reference dimensions to two different curves. I first select the parametric radius dimension (default is annotative). Next I click on the curve, then click the desired location. The dimension shows up, highlighted for editing. I press enter. Now the over-constrained window pops up giving me two options: Create a Reference Dimension or Reselect the Object. I choose Reference Dimension. The dimension immediately disappears. No error shows in the command bar. Attached is the file. It is the two large radii along the bottom (or top, its symmetric) that I am trying to give reference dimensions.
View 1 Replies View RelatedHow do I edit a dimension text to add a second line (so dimension on top of the line and text on the second line)?
View 3 Replies View RelatedIm drawing the image below for school but I cannot figure out how to create the radius dimensions as they shown.
The only ones I know how to do are they .25 and the .75 diameter. I have tried changing the dimension style in every way I can think of. Just to clarify the 1.31 and .63 radius demotion how the leader starts in the center and the arrow is on the inside of the circle yet the text has the extended leader and is outside the circle and the other radius demotions the text is in the middle of the leader is what I am trying to learn to do.
How can I print a dimension with its arrows but without it's dimension lines?
For example--I draw a rectangle and draw a horizontal dimension across the center of the rectangal. Then I flip the arrows and drag the number to the left outside of the rectangal. I want arrows facing inward from the left and right and the number out to the left. I don't want a line stretched across the center of the rectangal.
What is the easiest way to dimension to the centerline of a wall? I need to land a dimension tick where there is no line.
View 2 Replies View RelatedI have been working in AutoCAD for 4 years and am having trouble with dimensioning. I was given a drawing that was exported from VectorWorks into a dwg. However, when I try and do my dimension in paperspace, they are not correct. They only time they seem to work is when I do the scale at 1:1. But If I redraw the object I can do whatever scale I want and it works fine.
View 3 Replies View RelatedAutocad appears to be seclectively rounding this dimension. Both are the same DIMSTYLE, but one is rounding down, and one is rounding up. They are in the same drawing with the dimension taken on the same two lines.
Autocad Mechincal 2012 on Windows 7 64-bit
I am getting this Dim reassociate icon all over my drawing. how i can re associate all my dimensions in one step. Because every time a try to re associate. it asks me to select two points. I simply can not do this as i have hundreds of them in my drawing. I don't understand how they become dissociated. I have attached a screen shot of it.
View 2 Replies View RelatedI created a new dimension style in a drawing. But i can't find this new create dimension style in othes drawing. I am wondering how can i create my own dimension style and could be use in every drawing as my own style?
View 1 Replies View RelatedSetting a lineweight for the dimension objects,As the dimension object contains: text, dimension line and extension line and behaves as a block, then why the arrowhead (oblique) of the “dimension line” doesn’t follow the lineweight chosen for all the dimension objects?why the "arrowhead" (oblique) is thicker than other dimension elements?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am using Inventor 2010 Professional Student. I have drawn and extruded on a plane. I need to move this plane to a new measurement (from -45 to -47). When the Edit Dimension box appears, I type the new measurement in, but the plane wont move. I have a lot of construction sitting on this plane, but it is in the wrong spot.
View 2 Replies View RelatedMy linear dimension command is not working and I noticed I have no dimensions showing in my dims style manager. When I go to set up...I have no dimensions showing in the preview.
View 1 Replies View RelatedWhen I dimension an arc to find the radius, the dimesnions appears as a line going from teh center of the arc to the edge of the arc with the dimension in the middle. I don't want this. I want a leader pointing to the R text and that's it.
I've attached a photo of both scenarios- one dimension is the style I don't want, and one is basically the style I want (I'd like it to be more of an elbowed leader line), but it only appears when I use AutoCAD's ISO25 dimension style.
Same drawing (attached) with identical settings printed on one PC using DWG to PDF - creates this:
on another PC this:
So, some angle and aligned length dimensions are mirrored.
PDF previewed with Adobe Reader and Foxit PDF reader.
File is created and printed in 2010 LT, hence no UCS rotation, text style and print settings unaltered.
I have 2 dimension styles, but for one, I can't change the arrowhead
In the attachment, there are 2 dimensions, one of each style. The left one works good, the right one doesn't reflect any changes to arrows (type, size).
I have to deal with the plans of others, some who change the dimensions through text formatting that I can see are fake or incorrect. I used to have a command that would detect the ACTUAL dimension but I can't seem to find it in ACAD 2010. find the command to restore the true dimensions?
View 3 Replies View RelatedI'm trying to draw dimensions in paper space but:
It's not possible to work with annotation dimensions on paper space?
Using the traditional way and neither. Because AutoCAD 2010?
When I go to do a dimension it changes to the dimension layer and then I have to change back to my object layer is there a way to turn this option off?
View 3 Replies View RelatedIn 2011 AutoCAD Mechanical, I used to be able to match dimension override properties including the entered text. Not sure how it worked, but the manual entered text would be matched/transferred to the new default dimension. Now using 2012 and this function is not working. This feature is quite handy for the type of work we do. All match property settings are enabled.
View 2 Replies View RelatedI am new to AutoCad, and I'm sure this is a simple question. How do I put radius dimension in fraction format?
View 4 Replies View Related
