In 2011 AutoCAD Mechanical, I used to be able to match dimension override properties including the entered text. Not sure how it worked, but the manual entered text would be matched/transferred to the new default dimension. Now using 2012 and this function is not working. This feature is quite handy for the type of work we do. All match property settings are enabled.
View 2 RepliesMA.JPG
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
I'd like to create a routine that will automatically change an object to a pre-defined layer.
Command "1" would "MATCHPROP" and change a selected object to layer "1empty", command "2" would "MATCHPROP" to layer "0"
So, type 1, select an object, that object would be changed to layer "1empty"
why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display or miss its visibility but when i exit the command the hatch is there. the problem is you cannot match the properties of from one point to another.
View 1 Replies View RelatedI have a drawing with exsisting multileaders in it.
I am trying to apply the match properties to a newly created multileader but it isn't working.
Each time I open a drawing, on my arrow dimension I get a style override which is always scaled at 96. Even if I delete the style override, when I close the drawing and open it again, it's back. It's always on the "arrow" dimension, never any other dimensions. I don't know why it's been doing this, it just started one day out of nowhere. Is there a way I can get rid of it? I'm using AutoCAD 2005.
View 9 Replies View RelatedI have some drawings with lots of dimensions. Is there a way to check if any have been over ridden or a global way to set all dimensions to model value?
View 2 Replies View RelatedI am trying to override a dimension to provide a +/- at the end of one ACA dimension. I added the override, but it is not showing up - even after a regeneration...
View 2 Replies View RelatedI recently had to reinstall my AutoCAD LT 2008 and now when I open the properties palette to make adjustments to dimensions and fine tune, many peramiters that used to be visible are no longer there and accessible. I used to be able to adjust the dimscale as needed in the properties window, but can't now. How do I get it back?
View 7 Replies View RelatedI have a drawings with multiple layouts. In the first layout the whole drawing looks exactly like in does in model space, with reference to the colours. In the other layout the drawings all change colour to what they will look like when printed.
In these other layouts if I copy a viewport the colour returns, but if I change to another layout and back again then it reverts to what the original was. I have attached an image.
The copied vp is the one on top.
Like I said proably a quick fix but I dont know where to start. Is it something to do with Vp colour overrides?
No documentation : remove all property overrides
If I insert a table with our standard table style is is to big, so made a smaller text style, made a new table style with the new text style in it.
And if I insert a new table with the new style its still big...
But... select the table, right click, Remove All Property Overrides... And the text style is OK, only the row height is wrong, so in the table bar - unlocked, select the table again and move the right little triangle up until the rows don't get smaller.
My colleague is using AutoCAD 2012 LT. He was wondering is it possible to hatch an un-hatched object by matching it with the properties of a hatched source object?
View 1 Replies View RelatedIts it possible to match properties in inventor like AutoCad
View 2 Replies View RelatedI was working on one of the existing cad drawing, i came across this problem. I tried to match my Mtext with the existing text style, after M.P (match prop) everything look the same except the fonts style would not match, why is that? Does it have to be on the same layer?
View 9 Replies View RelatedI'm adding some rectangles to a drawing and want the hatching to match what it aready there. I thought the simplest way would be to match the properties, which works 99% of the time, but for some reason when I do that on the drawing I'm currently working on the scale is different.
View 8 Replies View RelatedI am using LT 2013. I cannot figure out how to match properties for text. I click on the 2 options and the box witdth, orientation, layer will match but not the style or font. I have tried using Quick Properties to select but have not had any success with this tool. Here is what I did:
Created a style and named it Arial.
Open the Quickselect box.
Apply to : click the box and select the various mtext objects.
Object Type: mText
Properties: Style
Operator: Select All
Include in New Selection Set is checked.
I click Ok and the objects are selected.
Next I go to the Properties Manager and change the style to the one I want to use, bu the text does not change. If Idoubleclick a text object it shows the correct style, but not the correct font. What have I missed doing?
When doing a match properties from one hatch to another, I end up with two hatches having identical properties (pattern, scale, etc) but that look completely different. See the attached image.
I tried the old snapbase trick and also tried various hatch origin settings, but without success.
i want to match properties from one multi text to many others , but i dont want to change the rotation to suite the source ...
View 9 Replies View RelatedWithout our office, we set up Sheet Sets for every set of drawings we produce, and we setup Page Setup Overrides specific to those drawings from which we can print. We may setup one for printing fullsize PDFs, another for in-house half-size plots, and another for 11x17 printing. The Overrides are saved on our office network.
We've been having an issue where the plotter(s) in the various Overrides won't work initially when someone other than the creator is printing. That person will have to open up the 'Manage Page Setup Overrides' tab, select 'Modify' for the Override they wish to change, and select the plotter to use in that Override (the plotter always defaults to 'None'). They can publish from that particular drawing set just fine until someone else in the office needs to print using an Override, in which case they go through the same procedure listed above.
We're using network printers only, and we've verified that the printer names, ports, etc. are all the same between the various computers, so different naming or port selection doesn't seem to be an issue.
We've just upgraded to AutoCAD Architecture 2012 and I discovered that my match properties command (MA) is now on steroids. In the process of making an existing plan into a demo plan, I put a toilet on a demo layer. I intended to use match properties to put other select items on the same demo layer, but when I touched the lavatory, it turned into a toilet. I've never had this happen before. In trying to solve the issue, I've discovered the same thing happens with other AEC objects (couches, urnials, chairs -- all became toilets) and it happens in multiple files. Only walls and doors remain intact with only the layer, color and linetype changing (which is what I was expecting).
I looked at the settings inside the match properties command and none of them seemed to apply. I deselected the special properties options anyway, but the problem remains.
Why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display but when i exit the command the hatch is there. the problem is you cannot match the properties of from one hatch to another.
This happens in all drawings!
I'm doing dimensions on Layout and I'm facing a problem: Using the same configurations of dimensions, sometimes I get the right dimension, but sometimes, without changing any configurations, I get wrong dimensions.
At the same drawing, with the same configurations, I get different dimensions to the same line. The only way that I'm being able to correct it is by using Match Properties (from a correct dimension to the one that went wrong).
my match properties command no longer works and i dont know why. No error msgs come up either
View 3 Replies View RelatedWhen I'm into reference edit mode (REFEDIT) I can make match properties command also on objects which are not in working set - this was not possible to do before and it is pretty annoying. Is this a bug or some new function, hopefully turnable on/off?
Also I never understood, why is not possible to copy anything from reference edit mode, but it is possible to paste into, also there are no problems in Block editor mode? It seems to me like artificial set limit with no obvius explanation why would that be good especially when I see that it is possible to match properties on outside objects.
When I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
I've been looking for commant that will allow me to copy a selection of entities to another layer for details. I'll need to be able to select several objets all at once and have each of them maintain the correct colors, linetypes, lineweights. Most everything is set as bylayer but that makes everything change once the objects are moved to a new layer.
How can I keep the everything looking like it never changed except for the fact that it will be moved to a new layer - layer 0 in this situation?
Normally when applying the matchprop command in CAD, one has to first pick the template element, and then select the elements which should have this template element's properties copied to/matched.
is it possible (via lisp perhaps?) to reverse this order, so that i can select a bunch of elements (e.g. through the quickselect icon) and THEN apply a matchpropertieslisp command, then select a single template element which the initially selected elements should mimic?
I am having some trouble adjusting the dimension scale to match blocks and objects in my drawings.
View 1 Replies View RelatedIn VS X4 we do not have the ability to match the project properties to the specs of the source video. When editing "project properties", we only have two choices for compression (NTSC DVD and PAL DVD) which only allow a maximum resolution of 720. In X2 we had many more choices which included MPEG-2 where we could get up to 1920.
I thought it was rule number one to match the project properties to the source video. Maybe that is not so important anymore, but snapshots for freeze frames must be done in project mode to include any attributes. The resulting snapshot is the resolution of the project properties and therefore not the same as the orignal video. Once rendered, it will not look the same as it's parent frame. Maybe freeze frames are not important to anyone else, but they are to me.
I shoot with a Canon HV20, so I need 1440x1080. I have created an empty project in X2 with the correct properties that I use to start projects in X3 and X4. X4 appears to maintain the project properties once they are set.
How I can get AutoCad to store my preferred "linear dimension" properties (i.e. arrow size, line weight etc).
Currently the standard setting are not what I use and every time I open a new drawing I have to go into amend a new linear properties and also any new linear dims I create has the standard settings.
I usually create one then "match" it's properties but it's still a bind creating the first one correctly.
I have a subdivided plane that I wish to scale horizontally to match another objects dimensions. In cinema 4d I can check an objects width and then just put that number into the other object width input.
View 4 Replies View Related