I recently had to reinstall my AutoCAD LT 2008 and now when I open the properties palette to make adjustments to dimensions and fine tune, many peramiters that used to be visible are no longer there and accessible. I used to be able to adjust the dimscale as needed in the properties window, but can't now. How do I get it back?
View 7 Repliesthe properties palette started only showing the current properites for the drawing and not the properties of the entity selected. what causes this i am using autocad civil 3d 2013.
View 9 Replies View RelatedSomehow the Properties Palette has gotten less wide- such that I can't read teh actual properties. Previously I was able to make it wider just by hovering over it, clicking on an arrow and dragging it wider. Not now.
View 1 Replies View RelatedIt's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
View 2 Replies View RelatedA user showed me today that she cannot see any properties for a wall, door, or other AEC object in the Properties palette.
Some options like height, width, etc. are shown, but not layer, style, etc. from the General portion of the Basic tab.
Is this going to be a reinstall scenario or is there a fix for this?
Is it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies View RelatedInstalled Map 3D 2013 this week. Have been using it with no problems for a few days.
I occasionally turn the properties palette on/off. Now I cannot get it to appear at all.
I'm working in AutoCAD Map 3D 2014, just upgraded in fact. I'm working with older drawings that had their text added by a trained chimp in simple text (Command: TEXT as near as I can figure). In updating these specification drawings, I'm making fonts the same size, updating material lists, correcting typos and just generally wiping off the banana chunks and drool.
Unfortunately, the properties palette no longer populates with all the text info like it did back in my 2010 version. In fact, the displayed values won't actually change when I select ANYTHING. Except it does go blank if I select something and then hit Ctrl 1 to get the palette.
I've hunted through Customize Palettes and Options under the Tools Menu (Map Classic workspace customized).
I am writing in the process of writing a AutoCAD/Civil3D plug-in (in VB.Net) product that needs current detects all of the updates (modified, erased , Unmodified, etc) on my own Entities and then only act on these once. So to this end I am maintaining a list of the affect entities and then processing the 'queue' on Document.CommandEnded.
This worked perfectly for me until I realized that the Properties Palette (and probably others) do not actually perform a command so the command end event is never caught. Obviously the queue will be processed on the next command but it looks sloppy that my data is not updated straight away.
I have seen various blog posts and a similar post on here that suggest using DocumentManager.DocumentLockModeWillChange or Editor.EnteringQuiescentState as the event to detect the end of the edit. However I am finding that no matter which of there I use I am unable to apply my Document Lock and this leads to Access Violations no matter what checks I do passed on the EventArgs.
I believe I have all the right Document locks in place, all in Using Statements so they should be disposed of correctly.
How can you remove or add a tab to the properties palette? I somehow have an extra Display tab on my properties palette and I can't find a way to remove it.
View 1 Replies View RelatedPossible to add custom fields to an AutoCAD object and be able to view those fields and contens in the extended data tab on the properties palette?
If it's not possible with VBA is it possible with .NET?
Question of curiosity. The Properties Palette in C3D 2012 has four tabs: Design, Display, Extended Data, and Object Class. The Design tab obviously has a lot of valuable information and allows you to edit and manipulate entities within the program. But do the other tabs really have much value?
OK, it seems that there may be times when the Extended Data tab is of use as you can associate hyperlinks, notes, and documents with an drawing object; so I can buy into that. Are there folks finding those features to be useful?
Now I don't know about the Display and Object Class tabs. Whenever I select an item, and happen to check these tabs out, there just doesn't seem to be any useful information. Perhaps I am not selecting the right types of objects. If they are not listing any valuable information, why are they so prominent instead of being buried deep somewhere. Any insight into the usefulness of the two tabs?,
AutoCAD Architecture 2009 - Something new started today!!! Working in either design or construction workspace the Properties tool bar will not operate. When I select an object and roll over to the Properties Pallette it simply starts to blink and does not open. Also, the Quick Properties panel will not open. Background, the new file I am working on was last saved on my laptop and transfered via a thumb drive. I have done this often with out a problem. However, the laptop is a new one with Windows 7 and my desktop has Windows XP.
View 1 Replies View RelatedI'm having a problem with my properties window or floating palette. When I select an object, such as a "line", my properties palette refreshes itself for about 3 seconds. When I hit esc, or deselect the line, it takes another 3 seconds to refresh itself. You can even see the properties palette start at the top and go blank as it travels downward. Very slow process, I can not get anything done. IF I close my properties palette, it does not have the delay, but I can not work without it. When I reboot, it works fine for about 5-6 selections, then jams back up.
ACA 2012 sp1 with Win 7 Pro 64bit sp1
Intel i7 hex 3.0
16 gb ram
Nvidia Quadro 4000
i got one problem with properties palette. that is when i select line in the drawing, it display no selection in the properties palette. but display other objects except lines.
View 5 Replies View RelatedI've created a VB.NET routine to update blocks, layers and layer filters from a source drawing.
After updating filters and when the command is finished (dialog closed), the Layer Properties Manager palette MAY not update to show the new set of filters although visually you can see that it does appear to refresh itself.
Whether it updates seems to depend on which filter is active and which filters are added.For example, I have properties filters A, B, C, D and E, and B and E have subfilters B1-B8 and E1-E9.
If Filter E3 is removed as a test and the parent filter E is active, when the command is done, E3 should appear back in the list, but it does not show until the palette is closed and reopened. If filter B is active, then the list will refresh and E3 will show immediatlely after the command exits.
I have added a dialog to my routine to inform the user they may have to close the palette and reopen to get the proper display.
I have tried Editor.UpdateScreen() but that does not work.
What setting would cause a huge, well about 5-second, delay when any entity is selected without a command active and only with the Properties Palette on-screen but autohidden? If command is given first, verb-noun, no hesitation after selecting at Select Objects: prompt. But, selecting any entity first, noun-verb, causes the 5-second delay before the mouse is again active. Very annoying. Closing the Properties Palette completely seems to cure the delay problem, but at a different cost in editing time. The workstation is running WinXP Pro with 4 gigs of ram.
View 9 Replies View RelatedOne of my CAD techs is having an issue with the Layer Properties Manager Palette. When she opened AutoCAD, the palette was gone. When she tried to bring it up with "LAYERPALETTE", she gets the "unknown command" message. When she tried to bring it up using "LA" or "LAYER" or the button on the ribbon, she gets a bunch of options in the command line.
How can we get the Layer Properties Manager Palette back?
C3D 2013
Windows 7
64 bit
I went to hide the properties palette and now it disappered. I type properties in the command line and right click on an object and select properties and nothing. No palette. What do I need to do to get the palette back?
View 4 Replies View RelatedI like to have all my palettes docked, however, the Properties Palette won't stay docked after closing and reopening AutoCAD. Every time I open AutoCAD, the Properties Palette reverts to its undocked status (all other docked palettes stay put). Is there any way to remedy this? It's a pain to have to redock it every time I open the program.
View 3 Replies View RelatedWhen I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
I want to set up my drawings so that the title block displays properties from the model. I want to set this up so there will be drawing properties to extract into Vault. So I want to know what other Inventor and Vault users are doing to get model properties into Inventor drawings: Using model properties in the title block and nothing to extract in Vault or Copy model properties so Vault has data to extract.
I want to know what the best in class practice is? What are others doing? I do not want to use iLogic I was out of the box Inventor functionality.
How I can get AutoCad to store my preferred "linear dimension" properties (i.e. arrow size, line weight etc).
Currently the standard setting are not what I use and every time I open a new drawing I have to go into amend a new linear properties and also any new linear dims I create has the standard settings.
I usually create one then "match" it's properties but it's still a bind creating the first one correctly.
I have some blocks which were overruled. Now I would like in properties palettes show some thing else instead of" block reference " for those overruled objects. Is it possible ?
View 4 Replies View RelatedEvery single time I start AutoCAD 2013 my Properties Pallete's columns reset their size.
I've tried re-saving workspace to a new one. It won't work. It also doesn't matter if I open application using shortcut or by double-clicking DWG file.
My properties palette doesn't have a field for linetype? I swear there was one there previously (under the general section)?
View 4 Replies View Relatedas the subject states, at some point (I believe after uninstalling autodesk 360), our properties tool pallete will not populate info for the selected object. is there a fix other than re-installing from scratch? The installation fixer didn't work, and I've had to re-install twice now for other issues with the software, so it's getting very costly/time consuming to just re-install for these problems.
View 9 Replies View RelatedIs there a way to have check boxes in the Project Properties to be able to turn on and off txt / stamps / etc. for all sheets in a project? I am looking for something that is similarly down in Revit Title Blocks?
View 6 Replies View RelatedFor the last couple weeks I've been unable to view object properties or quick properties. If I right click on an object and select quick properties, a blank window comes up:
Similarly, if I bring up a properties window and select an object, the selection field remains blank and the object property fields are not populated with information relating to the selected object:
I finally got some Lisp scripts working. They generate a block library from a CSV file. The script reads the file, and generates a simple rectangular block based on dimensions on the line. I have another script that can read a csv of block names and values, and add these as attributes to the block.
The attributes added are simple, like "weight" and "max stack qty". I would like to be able to see these values in the properties tab or in quick properties. In my CUI I have "Display Custom Attributes" checked under "block reference".
However, when I select a block, no attributes show up. I can get it to show me things like "name" and all of the scaling values, just no attributes.