How I can get AutoCad to store my preferred "linear dimension" properties (i.e. arrow size, line weight etc).
Currently the standard setting are not what I use and every time I open a new drawing I have to go into amend a new linear properties and also any new linear dims I create has the standard settings.
I usually create one then "match" it's properties but it's still a bind creating the first one correctly.
Is there a way to make the linear dimension a diameter dimension?
View 9 Replies View RelatedCant seem to get my lookup table to adjust the linear dimension. Please see attached the block.
View 1 Replies View RelatedI'm using AUTOCAD 2011 x64 (E.208.0.0)I get the dimension linear tool;I specify the first extension line origin clicking somewhere;I specify the second extension line origin clicking somewhere; (ortho mode on)
Then I pull the mouse pointer to the direction I want the dimension go and I type 1, because I want the dimension lie down at a distance of 1 unit from the draw (a wall for example).
If I check the distance from the draw to the dimension line (not to the text) using de "Inquiry > Distance" tool I do not have that 1 unit I have typed, instead it retrieve a value like 0.9822, and this value varies on a random way, every time its different.
I recently had to reinstall my AutoCAD LT 2008 and now when I open the properties palette to make adjustments to dimensions and fine tune, many peramiters that used to be visible are no longer there and accessible. I used to be able to adjust the dimscale as needed in the properties window, but can't now. How do I get it back?
View 7 Replies View RelatedWhen measuring the distance between points the distance is correct. However, when I click dimension and linear the text shows a smaller value. They should match.
View 2 Replies View RelatedAutodesk Inventor 2010 .idw Drawing Detail - Where is the default setting for "Full Dimension Line" so that I can set it to always be on when placing a linear diametric dimension? I would prefer to turn it off on the few occasions when dimensioning a diameter on a Detail View that does not include the center line rather than each and every diameter on a section view. This is necessary because a diameter symbol does not show up in the diameter dimension unless the full distance line it is selected, which is not always possible. I am aware of the Application Option setting that allows Linear Diametric as a preference, which becomes the default for all dimensions, and it is user specific rather than document specific.
View 2 Replies View RelatedHow I can edit the default appearance of a Linear Dimension Style. Basically I want to change the default placement of the actual value over the arrow.
I´ve attached two pictures that shows what i mean.
How do you remove singular dimensions from within a string of linear dimensions?
At the moment I cannot delete individual dimensions and am required to delete all dimensions in that string and start again.
In 2011 AutoCAD Mechanical, I used to be able to match dimension override properties including the entered text. Not sure how it worked, but the manual entered text would be matched/transferred to the new default dimension. Now using 2012 and this function is not working. This feature is quite handy for the type of work we do. All match property settings are enabled.
View 2 Replies View RelatedWhat's the difference between linear and bi-linear when using gradients? they seem to do the same thing to me (or I don't notice a difference)
View 2 Replies View RelatedI can store some ObjectId from my drawing to text file. After that how we can get back ObjectId from string read from that text file. Or have a diferrent way to store the ObjectID.
View 3 Replies View RelatedIs there a location I can store large amounts of retrievable data in the DWG file?
View 9 Replies View RelatedWe have some data in SQLite, and i want to know, what is the best practice to store the style. Now my practice is: i finished the stilization, and save them into *.layer files, then load them with workflow into a new drawing. It works fine, but i have some problems and questions:
- The Map layers order is not working well. If i have only one Map layer, with polygon features (they have label), the label is disappear in most cases (its loaded, but the polygons uncover the labels). I have to click the polygon feature, then i need set Draw Order -> Send to Back command (and this is not working well all of the time). In the drawing data is a very useful command to send all hatch to back (hatchtoback). I want to do this, but with feature data.
- I want export the Map layers (with these styles) to drawing layers, so the drawing object get the feature data as object data. I know the mapimport command, this doint as well, but i can't load the style. I need to create drawing layers, wich contains the feature data, and have a nice style (set from *.layer files).
- How many layer can i load with workflow? Is it stable with hundred of layers? Is parallel the fastest method?
In my opinion: Map layer = contains feature data
Drawing layer = contains drawing data
the properties palette started only showing the current properites for the drawing and not the properties of the entity selected. what causes this i am using autocad civil 3d 2013.
View 9 Replies View RelatedWhen I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
Somehow the Properties Palette has gotten less wide- such that I can't read teh actual properties. Previously I was able to make it wider just by hovering over it, clicking on an arrow and dragging it wider. Not now.
View 1 Replies View RelatedIt's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
View 2 Replies View RelatedA user showed me today that she cannot see any properties for a wall, door, or other AEC object in the Properties palette.
Some options like height, width, etc. are shown, but not layer, style, etc. from the General portion of the Basic tab.
Is this going to be a reinstall scenario or is there a fix for this?
I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
I want to set up my drawings so that the title block displays properties from the model. I want to set this up so there will be drawing properties to extract into Vault. So I want to know what other Inventor and Vault users are doing to get model properties into Inventor drawings: Using model properties in the title block and nothing to extract in Vault or Copy model properties so Vault has data to extract.
I want to know what the best in class practice is? What are others doing? I do not want to use iLogic I was out of the box Inventor functionality.
I'm using balloons to get information from parts, then writing that part info to a custom table. I need to keep track of which balloon corresponds to which table row.
Is there some object/property of Balloon where I can store a single number or string? I'm already using the value field, so that's unavailable to me.
Also, one balloon corresponds to one table entry. That means I cannot create a custom iProperty in the part the balloon is attached to since more than one balloon may reference the same part.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
Is it possible to store a String Array to an XRecord?
View 1 Replies View RelatedFrom the AutoDESK docs [URL] ......
"AutoCAD.Application.ActiveDocument.SelectionSets. Add method
Not needed/provided" in VB.Net
Thus 'Autodesk.AutoCAD.ApplicationServices.Application. DocumentManager.MdiActiveDocument.SelectionSets' will not work.
So, I can't store multiple selection sets in VB.Net?
Why is it not provided? Or is there some other way to do that?
For the last couple weeks I've been unable to view object properties or quick properties. If I right click on an object and select quick properties, a blank window comes up:
Similarly, if I bring up a properties window and select an object, the selection field remains blank and the object property fields are not populated with information relating to the selected object:
I finally got some Lisp scripts working. They generate a block library from a CSV file. The script reads the file, and generates a simple rectangular block based on dimensions on the line. I have another script that can read a csv of block names and values, and add these as attributes to the block.
The attributes added are simple, like "weight" and "max stack qty". I would like to be able to see these values in the properties tab or in quick properties. In my CUI I have "Display Custom Attributes" checked under "block reference".
However, when I select a block, no attributes show up. I can get it to show me things like "name" and all of the scaling values, just no attributes.
I want to add additional information to objects create using Autocad.
But I want the data to be read by Navisworks Manage.
How can I put the data? Is it using xdata, NOD or any other type?
I'm using Autocad 2011 and visual express 2010
I have a few dozen variables that I am trying to store for use at the command line. I can only append to input area with the actual quickcalc open, how i can reinitialize the global variable list?
View 9 Replies View RelatedMy goal is to be able to store any object type (mainly an image jpg/bmp) inside a part that is not accessable through the normal user interface to be used with my addin.
I have been searching around and it seems like GetPrivateStream is the way to go.
Any working example of GetPrivateStream in vb.net and confirm if it actually stores the data inside the part.
I can't find a solution anywhere or any decent referencing material for this. If there is a better method of achieving this?
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedI have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View Related