Is there a way to have check boxes in the Project Properties to be able to turn on and off txt / stamps / etc. for all sheets in a project? I am looking for something that is similarly down in Revit Title Blocks?
View 6 RepliesSomehow the Properties Palette has gotten less wide- such that I can't read teh actual properties. Previously I was able to make it wider just by hovering over it, clicking on an arrow and dragging it wider. Not now.
View 1 Replies View RelatedIt's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
View 2 Replies View RelatedA user showed me today that she cannot see any properties for a wall, door, or other AEC object in the Properties palette.
Some options like height, width, etc. are shown, but not layer, style, etc. from the General portion of the Basic tab.
Is this going to be a reinstall scenario or is there a fix for this?
AutoCAD Architecture 2009 - Something new started today!!! Working in either design or construction workspace the Properties tool bar will not operate. When I select an object and roll over to the Properties Pallette it simply starts to blink and does not open. Also, the Quick Properties panel will not open. Background, the new file I am working on was last saved on my laptop and transfered via a thumb drive. I have done this often with out a problem. However, the laptop is a new one with Windows 7 and my desktop has Windows XP.
View 1 Replies View RelatedI'm having a problem with my properties window or floating palette. When I select an object, such as a "line", my properties palette refreshes itself for about 3 seconds. When I hit esc, or deselect the line, it takes another 3 seconds to refresh itself. You can even see the properties palette start at the top and go blank as it travels downward. Very slow process, I can not get anything done. IF I close my properties palette, it does not have the delay, but I can not work without it. When I reboot, it works fine for about 5-6 selections, then jams back up.
ACA 2012 sp1 with Win 7 Pro 64bit sp1
Intel i7 hex 3.0
16 gb ram
Nvidia Quadro 4000
i got one problem with properties palette. that is when i select line in the drawing, it display no selection in the properties palette. but display other objects except lines.
View 5 Replies View RelatedI like to have all my palettes docked, however, the Properties Palette won't stay docked after closing and reopening AutoCAD. Every time I open AutoCAD, the Properties Palette reverts to its undocked status (all other docked palettes stay put). Is there any way to remedy this? It's a pain to have to redock it every time I open the program.
View 3 Replies View RelatedI am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.
I can no longer open the Properties Palette when I double-click on something. Sometimes, I get the Quick Properties Box, instead -- which was already turned off. I've triple checked that the QP is off, made sure no tool tips or the like are on, and I've rebooted the computer, but I can't get rid of the thing.
The main Properties Palette still opens up when I use CTRL-1, if I type "properties" at the command prompt, and if I right-click and select "Properties" from the short-cut menu. Sounds great -- except when I double-click something out of habit and can't jump into the palette and keep going. Instead I have to clear out of whatever pops up on my screen and open the PP 'manually'.
I've gone in to the CUI and dragged "Properties" in to the double-click function, but...nada.
Just starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
View 5 Replies View RelatedIs it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies View Relatedthe properties palette started only showing the current properites for the drawing and not the properties of the entity selected. what causes this i am using autocad civil 3d 2013.
View 9 Replies View RelatedI recently had to reinstall my AutoCAD LT 2008 and now when I open the properties palette to make adjustments to dimensions and fine tune, many peramiters that used to be visible are no longer there and accessible. I used to be able to adjust the dimscale as needed in the properties window, but can't now. How do I get it back?
View 7 Replies View RelatedI want to create boxes where I can tick or cross (x) them but I'm not sure how to do it. I've looked through some threads but they appear to be for old versions of AI. For instance, some suggest the use of glyphs but it doesn't appear as shown in their screenshots.
I would like the box to be 'empty' and then I can either tick is in a green tick, or cross it in a red cross. I'm not aware of the keyboard inputs for ticks. (Like those found for the copyright logo)
[URL]
AI CS6
im running AutoCAD 2010 as part of a Inventor Package and everything was working fine until i installed the Inventor 2011 ......(it was to try to sort something else out as the new features were introduced in 2011, but because of work policy were stuck using 2010......isn't work grand)
Ive uninstalled 2011 without anything going wrong with Inventor 2010 but its AutoCAD 2010 im having trouble with
If i create anything (could be a line or dimension) and then open the properties window or quick properties what used to be there isn't.....
- in the quick properties it says it cant define anything
- in the main properties window, instead of being able to alter the scale of the line / text & adjust lengths etc, the fields have been replaced, at the bottom of the fields are UCS co-ordinates initially i thought it was because installing 2011 has corrupted the files or done something weird and wonderful to them so ive tried:
-Repairing
-Reinstalling - Without Uninstalling the original AutoCAD 2010
-Reinstalling - With Unistalling the original AutoCAD 2010
Im running a XP 64bit machine with the latest service pack
Ill get a screenshot to add tomorrow to make it clear what im on about.
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies View Relatedi change my screensetting from single laptop screen to extended screen (laptop+19") and back again on dayly basis.
the problem (which ONLY occours whit adobe products is
that when changeing my screen to laptop only the property boxes used fx; on layer/layer style/"blending options" appear (well they don't) outside the main window even though i placed them im my main window before changeing the screen setting.(from extended to normal).
most windows can be moved the the arrows or move function in the bottom bar, but how can i MOVE the pop-up property window and place it in the main (well, only) window ?
looking for a keyboard comb. to move the active window og a function
to place ALL windows i the main window...
i'm using PS 6.0
the "reset workspace" works fine on everything BUT the "Layer/layer style" -property boxes, and the whole prob. is that i only have 1 screen here at home.
Installed Map 3D 2013 this week. Have been using it with no problems for a few days.
I occasionally turn the properties palette on/off. Now I cannot get it to appear at all.
I'm working in AutoCAD Map 3D 2014, just upgraded in fact. I'm working with older drawings that had their text added by a trained chimp in simple text (Command: TEXT as near as I can figure). In updating these specification drawings, I'm making fonts the same size, updating material lists, correcting typos and just generally wiping off the banana chunks and drool.
Unfortunately, the properties palette no longer populates with all the text info like it did back in my 2010 version. In fact, the displayed values won't actually change when I select ANYTHING. Except it does go blank if I select something and then hit Ctrl 1 to get the palette.
I've hunted through Customize Palettes and Options under the Tools Menu (Map Classic workspace customized).
I am writing in the process of writing a AutoCAD/Civil3D plug-in (in VB.Net) product that needs current detects all of the updates (modified, erased , Unmodified, etc) on my own Entities and then only act on these once. So to this end I am maintaining a list of the affect entities and then processing the 'queue' on Document.CommandEnded.
This worked perfectly for me until I realized that the Properties Palette (and probably others) do not actually perform a command so the command end event is never caught. Obviously the queue will be processed on the next command but it looks sloppy that my data is not updated straight away.
I have seen various blog posts and a similar post on here that suggest using DocumentManager.DocumentLockModeWillChange or Editor.EnteringQuiescentState as the event to detect the end of the edit. However I am finding that no matter which of there I use I am unable to apply my Document Lock and this leads to Access Violations no matter what checks I do passed on the EventArgs.
I believe I have all the right Document locks in place, all in Using Statements so they should be disposed of correctly.
How can I fix the following:
In AutoCad (I am working with ACA 2012) there are several dialog boxes e.g. the "rename" dialog box that always show up in the same (too small) size.
After renaming e.g. a block, the window closes and I have to repeat the command to rename another item.
I would like to size the window and keep the setting and would like to keep renaming things without getting interupted by automatical closeups of the window.
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies View RelatedI've just loaded Corel Website Creator to a second pc -- a dell laptop. In page view, the Properties boxes are dithered -- see the screen cap below:
[URL]
I don't see this anywhere else in the program or any other programs. All other screens in Corel WSC look find. Can't find any 'options' setup that seem to control this.
How can you remove or add a tab to the properties palette? I somehow have an extra Display tab on my properties palette and I can't find a way to remove it.
View 1 Replies View RelatedPossible to add custom fields to an AutoCAD object and be able to view those fields and contens in the extended data tab on the properties palette?
If it's not possible with VBA is it possible with .NET?
Question of curiosity. The Properties Palette in C3D 2012 has four tabs: Design, Display, Extended Data, and Object Class. The Design tab obviously has a lot of valuable information and allows you to edit and manipulate entities within the program. But do the other tabs really have much value?
OK, it seems that there may be times when the Extended Data tab is of use as you can associate hyperlinks, notes, and documents with an drawing object; so I can buy into that. Are there folks finding those features to be useful?
Now I don't know about the Display and Object Class tabs. Whenever I select an item, and happen to check these tabs out, there just doesn't seem to be any useful information. Perhaps I am not selecting the right types of objects. If they are not listing any valuable information, why are they so prominent instead of being buried deep somewhere. Any insight into the usefulness of the two tabs?,
I have an eye problem Macular Dystrophy) that requires the CUI Menus and dialog boxes to be made larger. Changing the customizing windows fonts do not increase the size of anything. I am still using AutoCAD 14 through virtual XP but want to use Autodad 2011 and can't get it to change so I can read the CUI.
View 1 Replies View RelatedI've created a VB.NET routine to update blocks, layers and layer filters from a source drawing.
After updating filters and when the command is finished (dialog closed), the Layer Properties Manager palette MAY not update to show the new set of filters although visually you can see that it does appear to refresh itself.
Whether it updates seems to depend on which filter is active and which filters are added.For example, I have properties filters A, B, C, D and E, and B and E have subfilters B1-B8 and E1-E9.
If Filter E3 is removed as a test and the parent filter E is active, when the command is done, E3 should appear back in the list, but it does not show until the palette is closed and reopened. If filter B is active, then the list will refresh and E3 will show immediatlely after the command exits.
I have added a dialog to my routine to inform the user they may have to close the palette and reopen to get the proper display.
I have tried Editor.UpdateScreen() but that does not work.
What setting would cause a huge, well about 5-second, delay when any entity is selected without a command active and only with the Properties Palette on-screen but autohidden? If command is given first, verb-noun, no hesitation after selecting at Select Objects: prompt. But, selecting any entity first, noun-verb, causes the 5-second delay before the mouse is again active. Very annoying. Closing the Properties Palette completely seems to cure the delay problem, but at a different cost in editing time. The workstation is running WinXP Pro with 4 gigs of ram.
View 9 Replies View RelatedOne of my CAD techs is having an issue with the Layer Properties Manager Palette. When she opened AutoCAD, the palette was gone. When she tried to bring it up with "LAYERPALETTE", she gets the "unknown command" message. When she tried to bring it up using "LA" or "LAYER" or the button on the ribbon, she gets a bunch of options in the command line.
How can we get the Layer Properties Manager Palette back?
C3D 2013
Windows 7
64 bit